October 25, 2019 by Mark Filion | News & Events
Next week, Collabora will be sponsoring, exhibiting & speaking at ELCE in Lyon, France. We'll be showcasing not one but two demos at our booth this year: arcade racing on a ROCK Pi 4 with Panfrost, and GStreamer on the Magic Leap One.
October 24, 2019 by Erik Faye-Lund | Blog
I recently went to XDC 2019, where I gave yet another talk about Zink. I kinda forgot to write a blog-post about it, so here’s me trying to make up for it… or something like that. I’ll also go into some more recent developments as well.
October 09, 2019 by Dafna Hirschfeld | Blog
Prior to joining Collabora, I took part in Round 17 of the Outreachy internships, to work on the virtual drivers in the media subsystem of the Linux kernel, or more specifically, on the vicodec driver.
October 03, 2019 by Pekka Paalanen | Blog
What HDCP is, and why supporting HDCP in Weston is justified in both an economical and technical context.
September 30, 2019 by Mark Filion | News & Events
Collabora is proud to be hosting in Montreal the 2019 edition of the X.Org Developer's Conference (XDC), the leading event for developers working on all things Open graphics, including the Linux kernel, Mesa, DRM, Wayland and X11.
September 20, 2019 by Mark Filion | News & Events
Next week, Collaborans including Julian Bouzas and Enric Balletbò i Serra will be in Paris to participate in the 3rd edition of Embedded Recipes and 8th edition of Kernel Recipes
September 19, 2019 by Boris Brezillon | News & Events
Linux 5.3 was released over the weekend, which means it's time for our usual "where does Collabora stand in this picture?" tour. As has been the case for several years now, Collabora continues being an active contributor to the Linux kernel.
September 12, 2019 by Mark Filion | News & Events
Showcasing two brand new Open Source software demonstrations featuring the Xilinx high-performance Zynq UltraScale+ MPSoC, and the Magic Leap One augmented reality headset.
September 06, 2019 by Joey Ferwerda | News & Events
With the recent release of the OpenXR 1.0 specification, the presence of numerous Open Source platforms for Virtual Reality and Augmented Reality, and a growing community of developers, the need for a collaborative Open Source XR Conference became clear.
August 28, 2019 by Gert Wollny | Blog
With the release of virglrenderer 0.8.0, getting accelerated OpenGL within a virtual machine (VM) made a big leap forward. Since virglrenderer-0.7.0, the code base has seen ~600 commits, and Collabora provided more than 80% of these contributions.
August 20, 2019 by Mark Filion | News & Events
Starting tomorrow, Collabora will be exhibiting & speaking at Embedded Linux Conference North America (ELCNA), the premier vendor-neutral technical conference for companies and developers using embedded Linux.
August 06, 2019 by Rohan Garg | Blog
Ongoing work on the reverse-engineered Panfrost OpenGL ES driver for Arm Mali GPUs has turned the RK3399 SoC into a very attractive platform to try out Wayland on ARM devices.
June 11, 2021 by Alyssa Rosenzweig | Blog
Panfrost, the open source driver for Arm Mali, now supports OpenGL ES 3.1 on both Midgard (Mali T760 and newer) and Bifrost (Mali G31, G52, G72) GPUs, adding a number of features, notably including compute shaders.
May 17, 2021 by Gert Wollny | Blog
Collabora has been investing into Perfetto to enable driver authors & users to get deep insights into driver internals and GPU performance. Here's how we applied this work to study workloads on the virtualized VirGL implementation.
May 11, 2021 by Emil Velikov | Blog
The Hantro Video4Linux2 (V4L2) kernel module has gained support for another SoC! The Microchip SAMA5D4 features a single decode unit supporting MPEG2, VP8 and H.264 streams, alongside the built-in post-processing unit.
May 05, 2021 by Frederic Danis | Blog
DKMS is a framework that is mostly used to build and install external kernel modules. It can also be used to install a specific patch to the modules of the current kernel, such as applying a specific fix to the Bluetooth USB subsystem.
April 29, 2021 by Xavier Claessens | Blog
Building GTK 4 as a Meson subproject for your own application is not only useful for Windows builds, but also for many Linux distributions that do not yet package a recent enough version of GTK 4 and/or its dependencies.
April 22, 2021 by Antonio Caggiano | Blog
Recently, we have been using Perfetto to successfully profile Apitrace traces in crosvm through VirGL renderer. We have now added perfetto instrumentation to VirGL renderer, Mesa, and Apitrace to see what happens precisely in a frame.
April 20, 2021 by Marcus Edel | Blog
As part of a project backed by INVEST-AI, a program managed by IVADO Labs, we have developed a multi-stage neural network-based solution that accurately locates and tracks the hands despite complex background noise and occlusion between hands.
April 13, 2021 by Andrzej Pietrasiewicz | Blog
Did you know you could run a permissively-licensed MTP implementation with minimal dependencies on an embedded device? Here's a step-by-step guide on how to easily run cmtp-responder on a Rock Pi 4 or any other board equipped with a UDC.
March 24, 2021 by Guillaume Desmottes | Blog
Earlier this year, the Rust compiler gained support for LLVM source-base code coverage. In this post we'll explain how to setup a CI job in a Rust project to feed source-base coverage information to GitLab.
March 18, 2021 by Xavier Claessens | Blog
Over the past few months, I've been working on a side project to improve Meson sub-project support. The best stress test is to build projects on Windows, without msys2, because it has no dependencies or tools installed (e.g. pkg-config).
March 04, 2021 by Alexandra Pereira | Blog
The most complete automated testing and continuous integration tool for the Linux kernel continues to evolve at a rapid pace. Here's a look at the latest improvements to the KernelCI dashboard, the main web interface used by the project.
March 03, 2021 by Arnaud Ferraris | Blog
In the embedded world, many modern SoCs such as the ST Microelectronics STM32MP1 now include coprocessor cores which can be used for a wide range of tasks and can offload some of the work from the main processor.
November 27, 2023 by George Kiagiadakis | News & Events
It is with the utmost excitement that we witness the release of PipeWire 1.0, the first officially stable release of this noteworthy inter-process multimedia streaming framework after many years of development.
November 21, 2023 by Kara Bembridge | News & Events
This week, the Debian project takes over Cambridge as MiniDebConf kicks off right in our own British backyard! Organized by Debian project members, MiniDebConfs aim to achieve similar objectives to those of the annual Debian conference, DebConf.
November 20, 2023 by Faith Ekstrand | News & Events
As of today, NVK is now an officially conformant implementation of the Vulkan 1.0 API on NVIDIA Turing hardware. This is the first time any Nouveau driver has gotten the Khronos conformance badge on any API.
November 09, 2023 by Kara Bembridge | News & Events
To ensure the Linux kernel is running smoothly, it requires maintenance from a variety of levels. Those working on the lower levels, or the plumber layers, of the kernel will have a chance to convene next week at the annual Linux Plumbers Conference.
November 02, 2023 by Vineet Suryan | News & Events
MLBench enables developers and maintainers to effortlessly gauge how their frameworks perform compared to other implementations, prior code versions, or across different boards, with respect to both runtime performance and other metrics.
October 31, 2023 by Laura Nao | News & Events
Linux Kernel 6.6 has arrived, bringing a significant amount of new features and performance enhancements. Collabora has actively contributed many patches, including work on MediaTek and Rockchip.
October 12, 2023 by Kara Bembridge | News & Events
The fall conference season continues next week with the X.Org Developer's Conference, taking place from October 17 to 19 in A Coruna, Spain. Sponsored by Collabora, this event brings together developers with an interest in open graphics.
September 21, 2023 by Kara Bembridge | News & Events
Sunny Spain will have multimedia developers on speed dial next week for the 11th edition of the GStreamer Conference, taking place at the Palexco Convention Centre in A Coruña from September 25 to 26.
September 19, 2023 by Kara Bembridge | News & Events
The world-renowned culinary scene in The City of Light will be getting a pack of different types of chefs next week for Kernel Recipes and Embedded Recipes. Kernel Recipes kicks off on September 25, then Embedded Recipes from September 28 to 29.
September 11, 2023 by Kara Bembridge | News & Events
Collabora is headed to Amsterdam! This year, we will be showcasing some of our recent work on the DAB protocol, as well as the software integration of LCEVC, MPEG's novel enhancement codec, into the GStreamer multimedia framework.
September 11, 2023 by Mateo de Mayo | News & Events
The Monado SLAM datasets (MSD) are egocentric visual-inertial SLAM datasets recorded to improve the Basalt-based inside-out tracking component of the Monado project.
September 07, 2023 by Benjamin Gaignard | News & Events
The latest mainline Linux kernel (v6.5) includes 22 patches that enable support for the AV1 uAPI and for two stateless video decoders: one for the Rockchip RK3588 and one for MT8195, a MediaTek SoC.
Here are the events we'll be attending in the coming weeks – come say hello!
November 23-26, Cambridge, UK
December 12-13, San Jose, California
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português