News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

Outreachy 2017

June 02, 2017 by Mark Filion  |   News & Events

Collabora is proud to once again be sponsoring the latest round (Round 14) of Outreachy internships, which began earlier this week! More specifically, Collabora has chosen to sponsor the Linux kernel projects for the May-August semester.

Outreachy 2017

Three days, two exhibits, three talks

May 30, 2017 by Mark Filion  |   News & Events

Over the next few days, Collabora is very excited to be taking part in three events where we'll be exhibiting as well as giving talks: Augmented World Expo, Automotive Linux Summit and Open Source Summit Japan.

Three days, two exhibits, three talks

VR World, GStreamer, OSS, Vulkanised!

May 16, 2017 by Mark Filion  |   News & Events

On the road again! Collaborans are heading to London, A Coruña & Buenos Aires to attend a VR event, a hackfest, a conference on Open Source systems, and a day of technical sessions on Vulkan! See you there?

VR World, GStreamer, OSS, Vulkanised!

Collabora at GENIVI AMM

May 08, 2017 by Mark Filion  |   News & Events

From May 9 to 11, Collabora will be attending the GENIVI All Member Meeting & Open Community Days: Advancing Connected Vehicles in a Connected World, in Birmingham, UK!

Collabora at GENIVI AMM

Collabora contributions to GStreamer 1.12

May 04, 2017 by Olivier Crête  |   Blog

Along with the usual load of memory leaks, crashes and other bugs, Collabora's multimedia team once again contributed a number of improvements across a wide number of areas.

Collabora contributions to GStreamer 1.12

Collabora & Linux Kernel 4.11

May 01, 2017 by Helen Fornazier  |   News & Events

Linux Kernel 4.11 was released yesterday, and 9 different Collabora developers contributed a total of 44 patches, while also reviewing 22 other patches.

Collabora & Linux Kernel 4.11

Android: Getting up and running on the iMX6

April 27, 2017 by Robert Foss  |   Blog

Getting Android up and running on the iMX6 platform using an open source graphics stack has been impossible up until recently, but now you can. Here's a guide through the steps.

Android: Getting up and running on the iMX6

Receiving an AES67 stream with GStreamer

April 25, 2017 by Olivier Crête  |   Blog

With GStreamer you can easily receive a AES67 stream, the standard which allows inter-operability between different IP based audio networking systems and transfers of live audio between profesionnal grade systems.

Receiving an AES67 stream with GStreamer

Quick hack: Changing the Android boot animation

April 21, 2017 by Robert Foss  |   Blog

If you're looking to change the Android boot animation to something other than the stock one, here's a hands-on guide to help you to do it.

Quick hack: Changing the Android boot animation

GStreamer 1.12: Intel Media SDK support and more

April 19, 2017 by Olivier Crête  |   Blog

With GStreamer 1.12's first release candidate out for testing and the final release expected soon, here's a brief preview of some of the (many) new features, bugfixes and improvements that will be arriving with this release.

GStreamer 1.12: Intel Media SDK support and more

Upcoming events: VR, NAB & Khronos

April 18, 2017 by Mark Filion  |   News and Events

Collaborans are once again hitting the road and will be attending three separate events over the next new two weeks, in London, Las Vegas and Amsterdam

Upcoming events: VR, NAB & Khronos

Tracing user space and OS interactions

April 10, 2017 by Gabriel Krisman Bertazi  |   Blog

Like the bug that no one can solve, many issues occur on the interface between the user application and the operating system. But even in the good Open Source world, understanding what is happening at these interfaces is not always easy.

Tracing user space and OS interactions

Understanding computer vision & AI, part 1

August 13, 2020 by Marcus Edel  |   Blog

Following our recent presentation at OSSummit, many showed interest in learning more about solving real-world problems with computer vision. Here is a new blog series, on computer vision, object detection, and building a system on the edge.

Understanding computer vision & AI, part 1

Testing Weston DRM/KMS backends with virtme and VKMS

August 07, 2020 by Leandro Ribeiro  |   Blog

Recent work in Weston, the industry-standard Wayland compositor, has enabled DRM/KMS backends to be tested in the absence of real hardware, enabling more battle testing of corner-case and error conditions within automated testing frameworks.

Testing Weston DRM/KMS backends with virtme and VKMS

An introduction to Linux kernel initcalls

July 14, 2020 by Mylène Josserand  |   Blog

Initcalls, which serve to call functions during boot, were implemented early on in the development of the Linux Kernel. Read on as we take a closer look, including their purpose, their usage, ways to debug them (using initcall_debug or FTrace), and more.

An introduction to Linux kernel initcalls

Deep dive into OpenGL over DirectX layering

July 09, 2020 by Louis-Francis Ratté-Boulianne  |   Blog

Earlier this year, we announced a new project with Microsoft: the implementation of OpenCL & OpenGL to DirectX translation layers. Here's the latest on this work, including the steps taken to improve the performance of the OpenGL-On-D3D12 driver.

Deep dive into OpenGL over DirectX layering

Using syzkaller, part 4: Driver fuzzing

June 26, 2020 by Ricardo Cañuelo Navarro  |   Blog

Syzkaller is much needed tool for Linux kernel testing and debugging. With some work, it can also be enhanced to find bugs in specific drivers, such as V4L2. Here's how.

Using syzkaller, part 4: Driver fuzzing

Cross building Rust GStreamer plugins for the Raspberry Pi

June 23, 2020 by Guillaume Desmottes  |   Blog

Previously, we discussed about how Rust can be a great language for embedded programming. In this article, we'll explain an easy setup to cross build Rust code depending on system libraries, a common requirement when working on embedded systems.

Cross building Rust GStreamer plugins for the Raspberry Pi

Generating MPEG-DASH streams for Open Source adaptive streaming with GStreamer

June 12, 2020 by Stéphane Cerveau  |   Blog

Adaptive streaming is a technique to provide flexibility and scalability by offering variable bit-rate streams to the client. Here's a quick guide on how to generate a MPEG-DASH stream (the most completely adaptive streaming technique) using GStreamer.

Generating MPEG-DASH streams for Open Source adaptive streaming with GStreamer

Bifrost meets GNOME: Onward & upward to zero graphics blobs

June 05, 2020 by Alyssa Rosenzweig  |   Blog

With only free software, a Mali G31 chip can now run Wayland compositors with zero-copy graphics, including GNOME 3. We can run every scene in glmark2-es2, 3D games like Neverball can be played, and video players mpv and Kodi are now supported.

Bifrost meets GNOME: Onward & upward to zero graphics blobs

Using regmaps to make Linux drivers more generic

May 27, 2020 by Adrian Ratiu  |   Blog

Device drivers can support more revisions and SoC platforms by abstracting away specific hardware interface layouts. Let's examine a specific instance of this process, namely the effort to make the MIPI DSI host controller driver more generic.

Using regmaps to make Linux drivers more generic

Cross-compiling with gst-build and GStreamer

May 15, 2020 by Stéphane Cerveau  |   Blog

gst-build is one of the main build systems used by the community to develop the GStreamer platform. In my last blog post, I presented gst-build and explained how to get started with it. Now, let's get straight to the point regarding cross-compilation.

Cross-compiling with gst-build and GStreamer

Using syzkaller, part 3: Fuzzing your changes

May 12, 2020 by Andre Almeida  |   Blog

In part 2 of this series on syzkaller, we looked at how to install the tool and use it to improve our code base. Now, how does syzkaller report a bug it finds in the execution path of a system call? Let's add a new syscall description and see how it goes.

Using syzkaller, part 3: Fuzzing your changes

WirePlumber, the PipeWire session manager

May 07, 2020 by George Kiagiadakis  |   Blog

An in-depth look at WirePlumber, the modular and extensible session manager for PipeWire that brings advanced device management, policy control and security enforcement capabilities.

WirePlumber, the PipeWire session manager

Linux Developer Conference Brazil 2019

August 02, 2019 by Mark Filion  |   News & Events

This weekend, Collaborans are in São Paulo, Brazil, to take part in the third edition of Linux Developer Conference Brazil, a conference which aims to take the Brazilian Linux development community to the international level.

Linux Developer Conference Brazil 2019

Moving the Linux desktop to another reality

July 30, 2019 by Lubosz Sarnecki  |   News & Events

Today, we are very excited to announce xrdesktop, a new open source project sponsored by Valve, enabling interaction with traditional Linux desktop environments, such as GNOME and KDE, in VR.

Moving the Linux desktop to another reality

Collabora & Debian 10 (Buster)

July 25, 2019 by Andrej Shadura  |   News & Events

With DebConf19, the annual conference for Debian contributors and users, in full swing this week in Curitiba, Brazil, what better time to look at the contributions made by Collaborans to the latest Debian release!

Collabora & Debian 10 (Buster)

Linux Kernel 5.2

July 17, 2019 by Gabriel Krisman Bertazi  |   News & Events

With 11 engineers authoring, reviewing and testing nearly 170 patches for this latest release, Collabora ranked 8th in the list of most active employers by lines changed, sharing ranks with some of the prominent employers in Linux kernel development.

Linux Kernel 5.2

Welcoming the newest Collaborans!

June 21, 2019 by Jassie Badion  |   News & Events

For many, June 21, day of the Solstice, is a day of celebrations. At Collabora, we're also celebrating, as we take a moment to welcome all the newest members of our engineering and administration teams who've joined over the last year!

Welcoming the newest Collaborans!

Google Summer of Code 2019

May 30, 2019 by Mark Filion  |   News & Events

A few days ago, coding began for this year's Google Summer of Code (GSoC) projects. Along with four GStreamer and Wayland related projects, this year's edition also includes two Debian projects for which Collaborans will be mentors.

Google Summer of Code 2019

Linux Kernel 5.1

May 09, 2019 by André Almeida  |   News & Events

Earlier this week, Linux Kernel 5.1 was released, and with it came over 13,000 commits from developers all around the world, including Collaborans. This time around, no less than 12 different developers contributed commits (64), sign-offs (111) & more.

Linux Kernel 5.1

Collabora & GStreamer 1.16

May 06, 2019 by Aaron Boxer  |   News & Events

After a year-long development cycle, the much anticipated release was made available recently. With it came a number of exciting new features we're especially proud of, including per-element latency tracer and support for planar or non-interleaved audio.

Collabora & GStreamer 1.16

GStreamer support for the RIST Specification

April 09, 2019 by Nicolas Dufresne  |   News & Events

Collabora contributes elements implementing the RIST Simple Profile to GStreamer. This specification adds retransmissions to RTP streams in a way that it compatible with existing broadcast encoders and decoders.

GStreamer support for the RIST Specification

Linaro Connect meets Panfrost

March 29, 2019 by Mark Filion  |   News & Events

Next week, Collaborans will be in Bangkok, Thailand, to participate in the 25th edition of Linaro Connect, a gathering of the world's leading open source engineers working on Arm. Tomeu Vizoso and Gustavo Padovan will be in attendance to present Panfrost.

Linaro Connect meets Panfrost

Introducing: Monado

March 18, 2019 by Jakob Bornecrantz  |   News & Events

Following the release of the OpenXR 0.90 Provisional Specification by The Khronos Group, Collabora is proud to announce Monado, an open source implementation of the newly released OpenXR spec.

Introducing: Monado

European R-Car Consortium Forum 2019

March 13, 2019 by Mark Filion  |   News & Events

Tomorrow, March 14, Collabora will be in Düsseldorf, Germany, to take part and exhibit at the second edition of the Renesas European R-Car Consortium Forum!

European R-Car Consortium Forum 2019

Search the newsroom

Upcoming Events

Here are the online events we'll be attending in the coming weeks – join us!

AGL All Member Meeting

17-18 March, Online

LibrePlanet 2021

20-21 March, Online

Linaro Connect Virtual

23-25 March, Online

Open Since 2005 logo

We use cookies on this website to ensure that you get the best experience. By continuing to use this website you are consenting to the use of these cookies. To find out more please follow this link.

Collabora Ltd © 2005-2021. All rights reserved. Privacy Notice. Sitemap.

Collabora Limited is registered in England and Wales. Company Registration number: 5513718. Registered office: The Platinum Building, St John's Innovation Park, Cambridge, CB4 0DS, United Kingdom. VAT number: 874 1630 19.