News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

WirePlumber 0.3 released, now ready for the desktop

July 16, 2020 by George Kiagiadakis  |   News & Events

It is with great pleasure that we announce the availability of WirePlumber (the PipeWire session manager) version 0.3.0. This release brings support for desktop use cases and is a working drop-in replacement for PipeWire's example session manager.

WirePlumber 0.3 released, now ready for the desktop

An introduction to Linux kernel initcalls

July 14, 2020 by Mylène Josserand  |   Blog

Initcalls, which serve to call functions during boot, were implemented early on in the development of the Linux Kernel. Read on as we take a closer look, including their purpose, their usage, ways to debug them (using initcall_debug or FTrace), and more.

An introduction to Linux kernel initcalls

Deep dive into OpenGL over DirectX layering

July 09, 2020 by Louis-Francis Ratté-Boulianne  |   Blog

Earlier this year, we announced a new project with Microsoft: the implementation of OpenCL & OpenGL to DirectX translation layers. Here's the latest on this work, including the steps taken to improve the performance of the OpenGL-On-D3D12 driver.

Deep dive into OpenGL over DirectX layering

Welcoming five new Collaborans!

July 09, 2020 by Erica Ryoo  |   News & Events

Despite the many obstacles brought on by the pandemic, Collabora continues to build and strengthen its engineering and administration teams for the road ahead. Join us in welcoming Angelica, Raghavendra, Doug, Italo and Theodotos!

Welcoming five new Collaborans!

Monado: Multi-application support with XR_EXTX_overlay

June 30, 2020 by Lubosz Sarnecki  |   News & Events

The recent improvements in Monado like out of process compositing and multi-layer rendering released with v0.2 prepared the requirements to implement OpenXR's XR_EXTX_overlay extension.

Monado: Multi-application support with XR_EXTX_overlay

Using syzkaller, part 4: Driver fuzzing

June 26, 2020 by Ricardo Cañuelo Navarro  |   Blog

Syzkaller is much needed tool for Linux kernel testing and debugging. With some work, it can also be enhanced to find bugs in specific drivers, such as V4L2. Here's how.

Using syzkaller, part 4: Driver fuzzing

Cross building Rust GStreamer plugins for the Raspberry Pi

June 23, 2020 by Guillaume Desmottes  |   Blog

Previously, we discussed about how Rust can be a great language for embedded programming. In this article, we'll explain an easy setup to cross build Rust code depending on system libraries, a common requirement when working on embedded systems.

Cross building Rust GStreamer plugins for the Raspberry Pi

Embedded Linux & Open Source take the virtual stage

June 18, 2020 by Mark Filion  |   News & Events

Collabora will be presenting on five separate occasions during the virtual editions of Embedded Linux Conference North America and Open Source Summit North America, taking place later this month.

Embedded Linux & Open Source take the virtual stage

Generating MPEG-DASH streams for Open Source adaptive streaming with GStreamer

June 12, 2020 by Stéphane Cerveau  |   Blog

Adaptive streaming is a technique to provide flexibility and scalability by offering variable bit-rate streams to the client. Here's a quick guide on how to generate a MPEG-DASH stream (the most completely adaptive streaming technique) using GStreamer.

Generating MPEG-DASH streams for Open Source adaptive streaming with GStreamer

Bifrost meets GNOME: Onward & upward to zero graphics blobs

June 05, 2020 by Alyssa Rosenzweig  |   Blog

With only free software, a Mali G31 chip can now run Wayland compositors with zero-copy graphics, including GNOME 3. We can run every scene in glmark2-es2, 3D games like Neverball can be played, and video players mpv and Kodi are now supported.

Bifrost meets GNOME: Onward & upward to zero graphics blobs

Kernel 5.7: Forging ahead, despite COVID-19

June 04, 2020 by Andrzej Pietrasiewicz  |   News & Events

This latest release is the first to contain development work accomplished amid the lockdown measures. Despite these significant changes, Collaborans have also been steadfast in their contributions, with multiple projects progressing.

Kernel 5.7: Forging ahead, despite COVID-19

Google Summer of Code 2020

June 01, 2020 by Mark Filion  |   News & Events

Coding hss begun for this year's Google Summer of Code (GSoC) projects, announced earlier last month. The 2020 edition selected 1,199 students from 66 countries, to work with 199 mentoring organizations over the course of the summer.

Google Summer of Code 2020

XDC 2017 - Links to recorded presentations (videos)

September 23, 2017 by Guy Lunardi  |   Blog

Many thanks to Google for recording all the XDC2017 talks. To make them easier to watch, here are direct links to each talk recorded at XDC2017.

XDC 2017 - Links to recorded presentations (videos)

DebConf 17: Flatpak and Debian

August 17, 2017 by Simon McVittie  |   Blog

Last week, I attended DebConf 17 in Montréal, returning to DebConf for the first time in 10 years (last time was DebConf 7 in Edinburgh). It was great to put names to faces and meet more of my co-developers in person!

DebConf 17: Flatpak and Debian

Android: NXP i.MX6 on Etnaviv Update

July 24, 2017 by Robert Foss  |   Blog

More progress is being made in the area of i.MX6, etnaviv and Android. Since the last post a lot work has gone into upstreaming and stabilizing the etnaviv on Android ecosystem. This has involved Android, kernel and Mesa changes, many of which are available…

Android: NXP i.MX6 on Etnaviv Update

vkmark: more than a Vulkan benchmark

July 18, 2017 by Alexandros Frantzis  |   Blog

Ever since Vulkan was announced a few years ago, the idea of creating a Vulkan benchmarking tool in the spirit of glmark2 had been floating in my mind. Recently, thanks to my employer, Collabora, this idea has materialized! The result is the vkmark Vulkan…

vkmark: more than a Vulkan benchmark

Quick hack: Performance debugging Linux graphics on Mesa

June 29, 2017 by Robert Foss  |   Blog

Debugging graphics performance in a simple and high-level manner is possible for all Gallium based Mesa drivers using GALLIUM_HUD, a feature that adds performance graphs to applications.

Quick hack: Performance debugging Linux graphics on Mesa

Debian armhf VM on arm64 server

June 20, 2017 by Sjoerd Simons  |   Blog

At Collabora one of the many things we do is build Debian derivatives/overlays for customers on a variety of architectures including 32 bit and 64 bit ARM systems. And just as Debian does, our OBS system builds on native systems rather than emulators.

Debian armhf VM on arm64 server

NVMe: Officially faster for emulated controllers!

June 13, 2017 by Helen Koike  |   Blog

The feature to improve NVMe performance over emulated environments has now been officially released in the NVMe Specification Revision 1.3 under the name "Doorbell Buffer Config command", along with an implementation in the mainline Linux kernel!

NVMe: Officially faster for emulated controllers!

Android: NXP i.MX6 Buffer Modifier Support

June 05, 2017 by Robert Foss  |   Blog

GPUs like Intel and Vivante support storing contents of graphical buffers in different formats. Support for describing these formats using modifiers has now been added to Android and Mesa, enabling tiling artifact free running of Android on the iMX6 platform.

Android: NXP i.MX6 Buffer Modifier Support

Collabora contributions to GStreamer 1.12

May 04, 2017 by Olivier Crête  |   Blog

Along with the usual load of memory leaks, crashes and other bugs, Collabora's multimedia team once again contributed a number of improvements across a wide number of areas.

Collabora contributions to GStreamer 1.12

Android: Getting up and running on the iMX6

April 27, 2017 by Robert Foss  |   Blog

Getting Android up and running on the iMX6 platform using an open source graphics stack has been impossible up until recently, but now you can. Here's a guide through the steps.

Android: Getting up and running on the iMX6

Receiving an AES67 stream with GStreamer

April 25, 2017 by Olivier Crête  |   Blog

With GStreamer you can easily receive a AES67 stream, the standard which allows inter-operability between different IP based audio networking systems and transfers of live audio between profesionnal grade systems.

Receiving an AES67 stream with GStreamer

Quick hack: Changing the Android boot animation

April 21, 2017 by Robert Foss  |   Blog

If you're looking to change the Android boot animation to something other than the stock one, here's a hands-on guide to help you to do it.

Quick hack: Changing the Android boot animation

Testing in the Cloud: Enabling Fedora's openQA for flexible cloud deployment

July 24, 2024 by Deborah Brouwer  |   News & Events

OpenQA is a tool for functional, end-to-end testing of operating system distributions. Earlier this year, Collabora undertook a project, sponsored by Meta, to reproduce Fedora’s openQA deployment in the AWS cloud.

Testing in the Cloud: Enabling Fedora's openQA for flexible cloud deployment

Kernel 6.10: Keep the updates coming

July 18, 2024 by Sebastian Reichel  |   News & Events

The latest kernel 6.10 release brings multiple core changes and updates to BH workqueues. Let's examine the developments implemented by Collabora's engineers.

Kernel 6.10: Keep the updates coming

Taming the Panthor: OpenGL ES 3.1 conformance achieved on Mali-G610

July 15, 2024 by Eric Smith  |   News & Events

The Panthor kernel driver and Mesa Panfrost driver combination has achieved official conformance for OpenGL ES 3.1 on the Mali-G610 chip, ensuring reliable performance for users on Mesa version 24.1.1.

Taming the Panthor: OpenGL ES 3.1 conformance achieved on Mali-G610

ElectricMaple: Remote-rendering debuts at AWE 2024

June 19, 2024 by Mark Filion  |   News & Events

Making its debut this week at Augmented World Expo (AWE) in Long Beach, ElectricMaple is an innovative project by Collabora and PlutoVR designed to enhance standalone XR experiences through remote-rendering.

ElectricMaple: Remote-rendering debuts at AWE 2024

Making a spatial impact at AWE 2024

May 30, 2024 by Kara Bembridge  |   News & Events

Join us at Augmented World Expo for a first-hand look at our recent XR work including ElectricMaple remote rendering, and xrdesktop showcasing a fully open-source 3-window desktop configuration with gaze-driven window selection.

Making a spatial impact at AWE 2024

Mesa 24.1 brings new hardware support for Arm and NVIDIA GPUs

May 22, 2024 by Faith Ekstrand  |   News & Events

Mesa 24.1 is out, and the graphics team at Collabora has been working hard to bring a slew of new features and bug fixes to Panfrost, Zink, NVK, and Mesa in general. Here's a look at their contributions for this release cycle.

Mesa 24.1 brings new hardware support for Arm and NVIDIA GPUs

Implementing DRM format modifiers in NVK

May 16, 2024 by Faith Ekstrand  |   News & Events

This week we merged support for the VK_EXT_image_drm_format_modifier extension in NVK, the new open-source Vulkan driver for NVIDIA hardware. We've also back-ported the code to the Mesa 24.1 staging branch, part of the upcoming Mesa 24.1 release.

Implementing DRM format modifiers in NVK

Kernel 6.9: Enable, test, repeat

May 14, 2024 by Nícolas Prado  |   News & Events

Collabora's engineers continue to be involved in the hardware enablement for a few different system-on-chips (SoCs) and platforms, and have also contributed significant improvements to kernel testing.

Kernel 6.9: Enable, test, repeat

SteamOS 3.6: How the Steam Deck atomic updates are improving

May 10, 2024 by Ludovico de Nittis  |   News & Events

Highlighting some of the key changes Collabora worked on with Valve to improve the system update tooling on SteamOS, including the move to Desync, making applying system updates significantly faster and more reliable.

SteamOS 3.6: How the Steam Deck atomic updates are improving

Debuting at IOT Solutions World Congress

May 09, 2024 by Kara Bembridge  |   News & Events

This year will be Collabora's first time exhibiting at IOTSWC, in partnership with STMicroelectronics. Collabora will be showcasing how the STM32MP2 is an ideal chip to enable edge AI solution in industrial environments.

Debuting at IOT Solutions World Congress

Effortless GStreamer Analytics Cross-Platform Support via ONNX Runtime

April 29, 2024 by Aaron Boxer  |   News & Events

GStreamer's support for diverse hardware and software platforms extends to its upstream Machine Learning capabilities, exemplified by its cross-platform ONNX Runtime implementation.

Effortless GStreamer Analytics Cross-Platform Support via ONNX Runtime

Collabora, not just Earth Day. Every day.

April 22, 2024 by Kara Bembridge  |   News & Events

As part of our commitment to social responsibility, we've been part of the 1% for the Planet Network since 2022. The environmental partners we support help to better the planet.

Collabora, not just Earth Day. Every day.

Search the newsroom

Upcoming Events

Here are the events we'll be attending in the coming weeks – come say hello!

AGL All Member Meeting

July 17-18, Berlin, Germany

 

Featured Video

Open Since 2005 logo

Our website only uses a strictly necessary session cookie provided by our CMS system. To find out more please follow this link.

Collabora Limited © 2005-2024. All rights reserved. Privacy Notice. Sitemap.