News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

Open Source meets Super Resolution, part 1

September 21, 2020 by Marcus Edel  |   Blog

Introducing an accurate and light-weight deep network for video super-resolution upscaling, running on a completely open source software stack using Panfrost, the free and open-source graphics driver for Mali GPUs.

Open Source meets Super Resolution, part 1

X.Org Developer's Conference 2020

September 15, 2020 by Mark Filion  |   News & Events

The lineup of great virtual conferences continues this week with the 2020 edition of X.Org Developer's Conference (XDC), the leading event for developers working on all things Open graphics, including the Linux kernel, Mesa, DRM, Wayland and X11.

X.Org Developer's Conference 2020

Integrating libcamera into PipeWire

September 11, 2020 by Raghavendra Rao  |   Blog

PipeWire continues to evolve with the recent integration of libcamera, a library to support complex cameras. In this blog post, I'll explain why libcamera exists, what it does, and how we integrated it in PipeWire.

Integrating libcamera into PipeWire

Pushing pixels to your Chromebook

August 31, 2020 by Emil Velikov  |   Blog

A high-level introduction of the Linux graphics stack, how it is used within ChromeOS, and the work done to improve software rendering (while simultaneously improving GPU rendering by reducing the boilerplate needed in applications).

Pushing pixels to your Chromebook

Using the Linux kernel's Case-insensitive feature in Ext4

August 27, 2020 by Gabriel Krisman Bertazi  |   Blog

Last year, a (controversial) feature was added to the Linux kernel to support optimized case-insensitive file name lookups in the Ext4 filesystem. Here's a look at why this was merged, what improvements have been made since, and how to put it to work.

Using the Linux kernel's Case-insensitive feature in Ext4

One week, two events: DebConf20 & Linux Plumbers Conference

August 24, 2020 by Mark Filion  |   News & Events

August ends on a high note with two virtual events this week: DebConf20, Debian's annual conference, and Linux Plumbers Conference, the premier event for developers working at all levels of the Linux kernel's plumbing layer and beyond.

One week, two events: DebConf20 & Linux Plumbers Conference

Panfrost performance counters with Perfetto

August 21, 2020 by Antonio Caggiano  |   Blog

We have now integrated Mali GPU hardware counters supported by Panfrost with Perfetto's tracing SDK, unlocking all-in-one graphics-aware profiling on Panfrost systems!

Panfrost performance counters with Perfetto

High bitrate video streaming with GStreamer's RTP elements

August 20, 2020 by Antonio Ospite  |   Blog

Key performance improvements and fixes to GStreamer's RTP stack have landed in GStreamer 1.18, due in the coming months. The latest enhancements provide an important boost in throughput, opening the gate to high bitrate video streaming.

High bitrate video streaming with GStreamer's RTP elements

Understanding computer vision & AI, part 1

August 13, 2020 by Marcus Edel  |   Blog

Following our recent presentation at OSSummit, many showed interest in learning more about solving real-world problems with computer vision. Here is a new blog series, on computer vision, object detection, and building a system on the edge.

Understanding computer vision & AI, part 1

Testing Weston DRM/KMS backends with virtme and VKMS

August 07, 2020 by Leandro Ribeiro  |   Blog

Recent work in Weston, the industry-standard Wayland compositor, has enabled DRM/KMS backends to be tested in the absence of real hardware, enabling more battle testing of corner-case and error conditions within automated testing frameworks.

Testing Weston DRM/KMS backends with virtme and VKMS

Kernel 5.8: Collabora's biggest & most significant contributions yet!

August 05, 2020 by Dafna Hirschfeld  |   News & Events

The ability for a relatively small software consultancy to contribute at this level demonstrates a fantastic improvement in vendors' mindset when it comes to working Open First and providing mainline support out-of-box as early as possible.

Kernel 5.8: Collabora's biggest & most significant contributions yet!

Lighthouse positional tracking in Monado with libsurvive

July 17, 2020 by Christoph Haag  |   News & Events

HTC Vive (Pro) and Valve Index hardware users can now experiment with positional tracking in Monado, thanks to the implementation of a libsurvive driver using the libsurvive library developed by Charles Lohr, David Berger and many contributors.

Lighthouse positional tracking in Monado with libsurvive

A look at Vulkan extensions in Venus

October 19, 2022 by Igor Torrente  |   Blog

Venus is a virtual Vulkan driver based on the Virtio-GPU protocol, which defines the serialization of Vulkan commands between guest and host. Here's a closer look at Venus, its components, and their relations in the context of extensions.

A look at Vulkan extensions in Venus

Carlafox, an open-source web-based CARLA visualizer

October 11, 2022 by Vineet Suryan  |   Blog

Taking one step towards democratizing the daunting task of dataset generation by making image synthesis and automatic ground truth data generation maintainable, cheaper, and more repeatable.

Carlafox, an open-source web-based CARLA visualizer

Open source machine learning for video compression

September 14, 2022 by Marcus Edel  |   Blog

Using open source software, Collabora has developed an efficient compression pipeline that enables a face video broadcasting system that achieves the same visual quality as the H.264 standard while only using one-tenth of the bandwidth.

Open source machine learning for video compression

Improving Vulkan graphics state tracking in Mesa

September 07, 2022 by Faith Ekstrand  |   Blog

Introducing new common code for Mesa Vulkan drivers to support a new Vulkan extension, making it easier for app and game authors to manage Vulkan state - and easier for our drivers too.

Improving Vulkan graphics state tracking in Mesa

Using a Raspberry Pi as a Bluetooth speaker with PipeWire

September 02, 2022 by Frederic Danis  |   Blog

Using PipeWire, WirePlumber and a Raspberry Pi, you can create an audio bridge between a Bluetooth® device and an analog speaker system, breathing new life into your old speakers.

Using a Raspberry Pi as a Bluetooth speaker with PipeWire

Introducing the r600/NIR back-end

July 07, 2022 by Gert Wollny  |   Blog

Adventures in NIR-land: the past, the present, and what's lies ahead for the native NIR back-end for Mesa's R600 driver.

Introducing the r600/NIR back-end

Adding secondary command buffers to PanVk

June 15, 2022 by Manas Chaudhary  |   Blog

Getting PanVk, an open source driver for Arm Mali Midgard and Bifrost GPUs, closer to conformancy by implementing one of the core Vulkan features: support for secondary command buffers.

Adding secondary command buffers to PanVk

Bridging the synchronization gap on Linux

June 09, 2022 by Faith Ekstrand  |   Blog

After fighting with the divide between implicit and explicit synchronization with Vulkan on Linux for over seven years, we may finally have some closure. We're not to synchronization nirvana quite yet, but this is an important step along the way.

Bridging the synchronization gap on Linux

Monado's hand tracking: hand-waving our way towards a first attempt

May 31, 2022 by Moses Turner  |   Blog

Optical hand tracking for XR has a bit of a reputation - getting training data, training neural nets, and deploying them in real-time, low-latency environments such as XR is every bit as hard as they say it is.

Monado's hand tracking: hand-waving our way towards a first attempt

Visual-inertial tracking for Monado

April 05, 2022 by Mateo de Mayo  |   Blog

Monado now has initial support for 6DoF ("inside-out") tracking for devices with cameras and an IMU! Three free and open source SLAM/VIO solutions were integrated and adapted to work on XR: Kimera-VIO, ORB-SLAM3, and Basalt.

Visual-inertial tracking for Monado

Spotlight on Meson's full-featured developer environment

March 30, 2022 by Xavier Claessens  |   Blog

When developing an application or a library, it is very common to want to run it without installing it, or to install it into a custom prefix rather than on the system. Here's how Meson can help with that.

Spotlight on Meson's full-featured developer environment

How to write a Vulkan driver in 2022

March 23, 2022 by Faith Ekstrand  |   Blog

An incredible amount has changed in Mesa and in the Vulkan ecosystems since we wrote the first Vulkan driver in Mesa for Intel hardware back in 2015. Not only has Vulkan grown, but Mesa has as well.

How to write a Vulkan driver in 2022

Testing in the Cloud: Enabling Fedora's openQA for flexible cloud deployment

July 24, 2024 by Deborah Brouwer  |   News & Events

OpenQA is a tool for functional, end-to-end testing of operating system distributions. Earlier this year, Collabora undertook a project, sponsored by Meta, to reproduce Fedora’s openQA deployment in the AWS cloud.

Testing in the Cloud: Enabling Fedora's openQA for flexible cloud deployment

Kernel 6.10: Keep the updates coming

July 18, 2024 by Sebastian Reichel  |   News & Events

The latest kernel 6.10 release brings multiple core changes and updates to BH workqueues. Let's examine the developments implemented by Collabora's engineers.

Kernel 6.10: Keep the updates coming

Taming the Panthor: OpenGL ES 3.1 conformance achieved on Mali-G610

July 15, 2024 by Eric Smith  |   News & Events

The Panthor kernel driver and Mesa Panfrost driver combination has achieved official conformance for OpenGL ES 3.1 on the Mali-G610 chip, ensuring reliable performance for users on Mesa version 24.1.1.

Taming the Panthor: OpenGL ES 3.1 conformance achieved on Mali-G610

ElectricMaple: Remote-rendering debuts at AWE 2024

June 19, 2024 by Mark Filion  |   News & Events

Making its debut this week at Augmented World Expo (AWE) in Long Beach, ElectricMaple is an innovative project by Collabora and PlutoVR designed to enhance standalone XR experiences through remote-rendering.

ElectricMaple: Remote-rendering debuts at AWE 2024

Making a spatial impact at AWE 2024

May 30, 2024 by Kara Bembridge  |   News & Events

Join us at Augmented World Expo for a first-hand look at our recent XR work including ElectricMaple remote rendering, and xrdesktop showcasing a fully open-source 3-window desktop configuration with gaze-driven window selection.

Making a spatial impact at AWE 2024

Mesa 24.1 brings new hardware support for Arm and NVIDIA GPUs

May 22, 2024 by Faith Ekstrand  |   News & Events

Mesa 24.1 is out, and the graphics team at Collabora has been working hard to bring a slew of new features and bug fixes to Panfrost, Zink, NVK, and Mesa in general. Here's a look at their contributions for this release cycle.

Mesa 24.1 brings new hardware support for Arm and NVIDIA GPUs

Implementing DRM format modifiers in NVK

May 16, 2024 by Faith Ekstrand  |   News & Events

This week we merged support for the VK_EXT_image_drm_format_modifier extension in NVK, the new open-source Vulkan driver for NVIDIA hardware. We've also back-ported the code to the Mesa 24.1 staging branch, part of the upcoming Mesa 24.1 release.

Implementing DRM format modifiers in NVK

Kernel 6.9: Enable, test, repeat

May 14, 2024 by Nícolas Prado  |   News & Events

Collabora's engineers continue to be involved in the hardware enablement for a few different system-on-chips (SoCs) and platforms, and have also contributed significant improvements to kernel testing.

Kernel 6.9: Enable, test, repeat

SteamOS 3.6: How the Steam Deck atomic updates are improving

May 10, 2024 by Ludovico de Nittis  |   News & Events

Highlighting some of the key changes Collabora worked on with Valve to improve the system update tooling on SteamOS, including the move to Desync, making applying system updates significantly faster and more reliable.

SteamOS 3.6: How the Steam Deck atomic updates are improving

Debuting at IOT Solutions World Congress

May 09, 2024 by Kara Bembridge  |   News & Events

This year will be Collabora's first time exhibiting at IOTSWC, in partnership with STMicroelectronics. Collabora will be showcasing how the STM32MP2 is an ideal chip to enable edge AI solution in industrial environments.

Debuting at IOT Solutions World Congress

Effortless GStreamer Analytics Cross-Platform Support via ONNX Runtime

April 29, 2024 by Aaron Boxer  |   News & Events

GStreamer's support for diverse hardware and software platforms extends to its upstream Machine Learning capabilities, exemplified by its cross-platform ONNX Runtime implementation.

Effortless GStreamer Analytics Cross-Platform Support via ONNX Runtime

Collabora, not just Earth Day. Every day.

April 22, 2024 by Kara Bembridge  |   News & Events

As part of our commitment to social responsibility, we've been part of the 1% for the Planet Network since 2022. The environmental partners we support help to better the planet.

Collabora, not just Earth Day. Every day.

Search the newsroom

Upcoming Events

Here are the events we'll be attending in the coming weeks – come say hello!

AGL All Member Meeting

July 17-18, Berlin, Germany

 

Featured Video

Open Since 2005 logo

Our website only uses a strictly necessary session cookie provided by our CMS system. To find out more please follow this link.

Collabora Limited © 2005-2024. All rights reserved. Privacy Notice. Sitemap.