October 15, 2018 by Mark Filion | News & Events
This week, two Collaborans will be in Dresden, Germany to take part in the AGL All Member Meeting. George Kiagiadakis and Daniel Stone will be in attendance, with the former also giving a presentation on the latest happenings in upstream multimedia.
October 12, 2018 by Zeeshan Ali | Blog
After I started working for Collabora in April, I've finally been able to put some time on maintenance and development of Geoclue again. While I've fixed quite a few issues on the backlog, there has been some significant changes as of late.
October 12, 2018 by Mark Filion | News & Events
We're headed to Heraklion, Greece, to meet with the Panhellenic FOSS community at FOSSCOMM, a conference for programmers, students and anyone else interested in the open source movement!
October 10, 2018 by Martyn Welch | Blog
Like all software, Open Source software isn't without it's bugs and issues. However, thanks to the nature of Open Source, resolving or mitigating the issue you encountered can be quite the satisfying adventure when it comes to scratching the itch.
October 02, 2018 by Lucas Kanashiro | Blog
Last month, the first "MicroDebConf" took place at the Gama campus of the University of Brasilia. Here's a look at how this one day event came to be, and what was accomplished during that day.
September 20, 2018 by Mark Filion | News & Events
Next week, Collaborans will be heading to Paris, A Coruña & Berlin, to sponsor and speak at four different conferences: Embedded Recipes, Kernel Recipes, All Systems Go and XDC 2018. See you there?
September 18, 2018 by Ezequiel Garcia | Blog
When working on the Linux Kernel, testing via QEMU is pretty common. Here's a look at virtme, a QEMU wrapper that uses the host instead of a virtual disk, making working with QEMU extremely easy.
September 10, 2018 by Mark Filion | News & Events
From September 14 to 18, Collabora will be exhibiting at the IBC Show 2018, the "world's most influential media, entertainment and technology show"! If you are planning on attending, please make sure to stop by our booth, D-15 in Hall 14!
August 30, 2018 by Maxime Buquet | Blog
Earlier this month, Collabora sponsored & hosted the XMMP Sprint, the first developer event in the XMPP community in a long time. Here's a look at what was accomplished over the weekend, and what's next for this open standard.
August 29, 2018 by Guillaume Tucker | Blog
In addition to Collabora's work to add support in mainline Linux kernel for several Chromebooks, these platforms are now being continuously tested as part of kernelci.org. Here's how to set them up for kernel development & automated testing with LAVA.
August 28, 2018 by Mark Filion | News & Events
Starting tomorrow, Collaborans will be in beautiful British Columbia to take part, and speak, in this year's Open Source Summit North America! If you are planning on attending, come say hello or catch one of our presentations!
June 14, 2021 by Erik Faye-Lund | Blog
There's a lot that has happened in the world of Zink since my last update, so let's see if I can bring you up to date on the most important stuff, including upstream development, support for OpenGL 4.6 & GLES 3.1, and more.
June 11, 2021 by Alyssa Rosenzweig | Blog
Panfrost, the open source driver for Arm Mali, now supports OpenGL ES 3.1 on both Midgard (Mali T760 and newer) and Bifrost (Mali G31, G52, G72) GPUs, adding a number of features, notably including compute shaders.
May 17, 2021 by Gert Wollny | Blog
Collabora has been investing into Perfetto to enable driver authors & users to get deep insights into driver internals and GPU performance. Here's how we applied this work to study workloads on the virtualized VirGL implementation.
May 11, 2021 by Emil Velikov | Blog
The Hantro Video4Linux2 (V4L2) kernel module has gained support for another SoC! The Microchip SAMA5D4 features a single decode unit supporting MPEG2, VP8 and H.264 streams, alongside the built-in post-processing unit.
May 05, 2021 by Frederic Danis | Blog
DKMS is a framework that is mostly used to build and install external kernel modules. It can also be used to install a specific patch to the modules of the current kernel, such as applying a specific fix to the Bluetooth USB subsystem.
April 29, 2021 by Xavier Claessens | Blog
Building GTK 4 as a Meson subproject for your own application is not only useful for Windows builds, but also for many Linux distributions that do not yet package a recent enough version of GTK 4 and/or its dependencies.
April 22, 2021 by Antonio Caggiano | Blog
Recently, we have been using Perfetto to successfully profile Apitrace traces in crosvm through VirGL renderer. We have now added perfetto instrumentation to VirGL renderer, Mesa, and Apitrace to see what happens precisely in a frame.
April 20, 2021 by Marcus Edel | Blog
As part of a project backed by INVEST-AI, a program managed by IVADO Labs, we have developed a multi-stage neural network-based solution that accurately locates and tracks the hands despite complex background noise and occlusion between hands.
April 13, 2021 by Andrzej Pietrasiewicz | Blog
Did you know you could run a permissively-licensed MTP implementation with minimal dependencies on an embedded device? Here's a step-by-step guide on how to easily run cmtp-responder on a Rock Pi 4 or any other board equipped with a UDC.
March 24, 2021 by Guillaume Desmottes | Blog
Earlier this year, the Rust compiler gained support for LLVM source-base code coverage. In this post we'll explain how to setup a CI job in a Rust project to feed source-base coverage information to GitLab.
March 18, 2021 by Xavier Claessens | Blog
Over the past few months, I've been working on a side project to improve Meson sub-project support. The best stress test is to build projects on Windows, without msys2, because it has no dependencies or tools installed (e.g. pkg-config).
March 04, 2021 by Alexandra Pereira | Blog
The most complete automated testing and continuous integration tool for the Linux kernel continues to evolve at a rapid pace. Here's a look at the latest improvements to the KernelCI dashboard, the main web interface used by the project.
September 20, 2017 by Mark Filion | News & Events
The 2017 X.Org Developer's Conference kicks off today in Mountain View, California, and along with Collaborans attending & presenting, we're delighted to announce the first ever Collabora XDC Happy Hour!
September 11, 2017 by Mark Filion | News & Events
Collaborans will be giving five talks during this year's edition, which starts today in Los Angeles!
September 06, 2017 by Sebastian Reichel | News & Events
Linux Kernel 4.13 is out, with 12 Collabora developers having contributed, pairing up with 4.12 as another kernel release with our highest number of Collabora developers!
August 04, 2017 by Mark Filion | News and Events
Collabora is proud to once again be a Gold Sponsor of this year's DebConf, the annual Debian conference for developers! This year's week-long conference takes place from August 6 to 12 at Collège de Maisonneuve in beautiful Montréal, where one of our…
July 27, 2017 by Mark Filion | News and Events
Over the next few days, Collaborans will be getting back on the road and attending two events, one in Manchester and one in Los Angeles. We're also very pleased to be sponsoring one of these events!
July 04, 2017 by Martyn Welch | News & Events
Linux Kernel 4.12 is out, with 12 Collabora developers having contributed, a new record number of developers contributing to a single kernel release for Collabora!
June 27, 2017 by Mark Filion | News & Events
Our worldwide team of Open Source engineers and developers continues to grow with new additions in Core, Graphics & Web! Welcome Denis Pynkin, Alexandros Frantzis and Santosh Mahto!
June 02, 2017 by Mark Filion | News & Events
Collabora is proud to once again be sponsoring the latest round (Round 14) of Outreachy internships, which began earlier this week! More specifically, Collabora has chosen to sponsor the Linux kernel projects for the May-August semester.
May 30, 2017 by Mark Filion | News & Events
Over the next few days, Collabora is very excited to be taking part in three events where we'll be exhibiting as well as giving talks: Augmented World Expo, Automotive Linux Summit and Open Source Summit Japan.
May 16, 2017 by Mark Filion | News & Events
On the road again! Collaborans are heading to London, A Coruña & Buenos Aires to attend a VR event, a hackfest, a conference on Open Source systems, and a day of technical sessions on Vulkan! See you there?
May 08, 2017 by Mark Filion | News & Events
From May 9 to 11, Collabora will be attending the GENIVI All Member Meeting & Open Community Days: Advancing Connected Vehicles in a Connected World, in Birmingham, UK!
Here are the events we'll be attending in the coming weeks – come say hello!
October 1-7, Barcelona, Spain
October 4-6, Minneapolis, MN, USA
October 11-13, London, UK
August 8-11, Phoenix, AZ, USA