News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

Android: Enabling mainline graphics

March 29, 2017 by Robert Foss  |   Blog

Android uses the HWC API to communicate with graphics hardware. This API is not supported on the mainline Linux graphics stack, but by using drm_hwcomposer as a shim it now is.

Android: Enabling mainline graphics

Linux block I/O tracing

March 28, 2017 by Gabriel Krisman Bertazi  |   Blog

Like starting a car with the hood open, sometimes you need to run your program with certain analysis tools attached to get a full sense of what is going wrong – or right.

Linux block I/O tracing

GTK+ Hackfest 2017: D-Bus communication with containers

March 24, 2017 by Simon McVittie  |   Blog

At the GTK hackfest in London (which accidentally became mostly a Flatpak hackfest) I've mainly been looking into how to make D-Bus work better for app container technologies like Flatpak and Snap.

GTK+ Hackfest 2017: D-Bus communication with containers

Collabora in Linux Format

March 22, 2017 by Mark Filion  |   News and Events

Check out the April issue (#222) of Linux Format magazine for our new monthly column on all things Open Source, including graphics, multimedia and more!

Collabora in Linux Format

Performance analysis in Linux

March 21, 2017 by Gabriel Krisman Bertazi  |   Blog

Modern CPUs implement a number of technologies that may affect application performance in unpredictable ways. Figuring out what is going wrong with an application can be a hard task, but it can become much easier with the correct analysis tools.

Performance analysis in Linux

Kernel debugging with QEMU: An overview of tools available

March 13, 2017 by Frédéric Dalleau  |   Blog

Once you've setup a virtual machine in QEMU using debootstrap, there are a number of tools available for testing, tracing and debugging, such as Kmemleak for memory leaks, GDB (GNU Debugger), ftrace et dynamic_debug.

Kernel debugging with QEMU: An overview of tools available

Quick hack: Removing the Chromebook Write-Protect screw

March 08, 2017 by Robert Foss  |   Blog

Before being able to write firmware data to any production Chromebook device, the Write-Protect screw has to be removed.

Quick hack: Removing the Chromebook Write-Protect screw

Two weeks, four events!

March 07, 2017 by Mark Filion  |   News and Events

Over the next two weeks, Collaborans will be present at four different events across the globe. If you plan on attending at any of these conferences, please reach out and say hello!

Two weeks, four events!

A flurry of open source graphics milestones

March 01, 2017 by Daniel Stone  |   Blog

The past few months have been busy ones on the open-source graphics front, bringing with them Wayland 1.13, Weston 2.0 and Mesa 17.0. Here's a look at some of these developments, including Collabora's behind-the-scenes work on performance improvement.

A flurry of open source graphics milestones

Quick hack: Precompiling APK files during Android AOSP build

February 23, 2017 by Robert Foss  |   Blog

How to create your custom Android image, and APK app(s), all at once.

Quick hack: Precompiling APK files during Android AOSP build

Embedded Linux Conference 2017

February 21, 2017 by Mark Filion  |   News and Events

Starting today, and for the next few days, Collaborans will be taking part in this year's Embedded Linux Conference North America, the "premier vendor-neutral technical conference for companies and developers using Linux in embedded products".

Embedded Linux Conference 2017

Collabora & Linux Kernel 4.10

February 20, 2017 by Gustavo Padovan  |   News and Events

Linux Kernel 4.10 is out, and this time Collabora contributed a total of 39 patches by 10 different developers.

Collabora & Linux Kernel 4.10

Engaging in an "Open First" remote internship at Collabora

October 20, 2020 by Gustavo Noronha  |   Blog

The concept of a remote internship may raise some doubts, or even red flags, for many students, as would remote jobs for professionals. As a result, we pay extra attention to how we onboard and support our interns.

Engaging in an

Building GStreamer text rendering and overlays on Windows with gst-build

September 28, 2020 by Aaron Boxer  |   Blog

GStreamer relies on various 2D font rendering and layout libraries such as Pango and Cairo to generate text for the Pango plugin, which contains elements such as textoverlay. Here's how to add the Pango plugin to a gst-build installation on Windows.

Building GStreamer text rendering and overlays on Windows with gst-build

Initcalls, part 2: Digging into implementation

September 25, 2020 by Mylène Josserand  |   Blog

In this second part of this blog post series on Linux kernel initcalls, we'll go deeper into implementation, with a look at the colorful __device_initcall() macro, the rootfs initcall, and how modules can be executed.

Initcalls, part 2: Digging into implementation

Open Source meets Super Resolution, part 1

September 21, 2020 by Marcus Edel  |   Blog

Introducing an accurate and light-weight deep network for video super-resolution upscaling, running on a completely open source software stack using Panfrost, the free and open-source graphics driver for Mali GPUs.

Open Source meets Super Resolution, part 1

Integrating libcamera into PipeWire

September 11, 2020 by Raghavendra Rao  |   Blog

PipeWire continues to evolve with the recent integration of libcamera, a library to support complex cameras. In this blog post, I'll explain why libcamera exists, what it does, and how we integrated it in PipeWire.

Integrating libcamera into PipeWire

Pushing pixels to your Chromebook

August 31, 2020 by Emil Velikov  |   Blog

A high-level introduction of the Linux graphics stack, how it is used within ChromeOS, and the work done to improve software rendering (while simultaneously improving GPU rendering by reducing the boilerplate needed in applications).

Pushing pixels to your Chromebook

Using the Linux kernel's Case-insensitive feature in Ext4

August 27, 2020 by Gabriel Krisman Bertazi  |   Blog

Last year, a (controversial) feature was added to the Linux kernel to support optimized case-insensitive file name lookups in the Ext4 filesystem. Here's a look at why this was merged, what improvements have been made since, and how to put it to work.

Using the Linux kernel's Case-insensitive feature in Ext4

Panfrost performance counters with Perfetto

August 21, 2020 by Antonio Caggiano  |   Blog

We have now integrated Mali GPU hardware counters supported by Panfrost with Perfetto's tracing SDK, unlocking all-in-one graphics-aware profiling on Panfrost systems!

Panfrost performance counters with Perfetto

Paving the way for high bitrate video streaming with GStreamer's RTP elements

August 20, 2020 by Antonio Ospite  |   Blog

Key performance improvements and fixes to GStreamer's RTP stack have landed in GStreamer 1.18, due in the coming months. The latest enhancements provide an important boost in throughput, opening the gate to high bitrate video streaming.

Paving the way for high bitrate video streaming with GStreamer's RTP elements

Understanding computer vision & AI, part 1

August 13, 2020 by Marcus Edel  |   Blog

Following our recent presentation at OSSummit, many showed interest in learning more about solving real-world problems with computer vision. Here is a new blog series, on computer vision, object detection, and building a system on the edge.

Understanding computer vision & AI, part 1

Testing Weston DRM/KMS backends with virtme and VKMS

August 07, 2020 by Leandro Ribeiro  |   Blog

Recent work in Weston, the industry-standard Wayland compositor, has enabled DRM/KMS backends to be tested in the absence of real hardware, enabling more battle testing of corner-case and error conditions within automated testing frameworks.

Testing Weston DRM/KMS backends with virtme and VKMS

An introduction to Linux kernel initcalls

July 14, 2020 by Mylène Josserand  |   Blog

Initcalls, which serve to call functions during boot, were implemented early on in the development of the Linux Kernel. Read on as we take a closer look, including their purpose, their usage, ways to debug them (using initcall_debug or FTrace), and more.

An introduction to Linux kernel initcalls

Open Source Summit Europe & ELCE 2020

October 22, 2020 by Mark Filion  |   News & Events

The 4-day event is dedicated to everything open source and will showcase a program of 250+ talks. Collaborans will once again be actively participating in the week's activities, with no less than eight presentations, a BoF on KernelCI, and two panel discussions!

Open Source Summit Europe & ELCE 2020

Kernel 5.9: Onwards and upwards

October 22, 2020 by Mylène Josserand  |   News & Events

Collaborans continue to be very active in the Linux kernel, authoring over 150 commits in this release. Here's a look at the improvements, and new features, contributed by our team, notably in hardware support, multimedia, graphics and testing.

Kernel 5.9: Onwards and upwards

Collabora & GStreamer 1.18

October 06, 2020 by Stéphane Cerveau  |   News & Events

A move to GitLab. A switch to the powerful Meson build system. A fast and reliable CI system implemented. The GStreamer community has been busy, bringing a bevy of enhancements to 1.18. Here's a look at the key contributions by Collaborans.

Collabora & GStreamer 1.18

X.Org Developer's Conference 2020

September 15, 2020 by Mark Filion  |   News & Events

The lineup of great virtual conferences continues this week with the 2020 edition of X.Org Developer's Conference (XDC), the leading event for developers working on all things Open graphics, including the Linux kernel, Mesa, DRM, Wayland and X11.

X.Org Developer's Conference 2020

One week, two events: DebConf20 & Linux Plumbers Conference

August 24, 2020 by Mark Filion  |   News & Events

August ends on a high note with two virtual events this week: DebConf20, Debian's annual conference, and Linux Plumbers Conference, the premier event for developers working at all levels of the Linux kernel's plumbing layer and beyond.

One week, two events: DebConf20 & Linux Plumbers Conference

Kernel 5.8: Collabora's biggest & most significant contributions yet!

August 05, 2020 by Dafna Hirschfeld  |   News & Events

The ability for a relatively small software consultancy to contribute at this level demonstrates a fantastic improvement in vendors' mindset when it comes to working Open First and providing mainline support out-of-box as early as possible.

Kernel 5.8: Collabora's biggest & most significant contributions yet!

Lighthouse positional tracking in Monado with libsurvive

July 17, 2020 by Christoph Haag  |   News & Events

HTC Vive (Pro) and Valve Index hardware users can now experiment with positional tracking in Monado, thanks to the implementation of a libsurvive driver using the libsurvive library developed by Charles Lohr, David Berger and many contributors.

Lighthouse positional tracking in Monado with libsurvive

WirePlumber 0.3 released, now ready for the desktop

July 16, 2020 by George Kiagiadakis  |   News & Events

It is with great pleasure that we announce the availability of WirePlumber (the PipeWire session manager) version 0.3.0. This release brings support for desktop use cases and is a working drop-in replacement for PipeWire's example session manager.

WirePlumber 0.3 released, now ready for the desktop

Welcoming five new Collaborans!

July 09, 2020 by Erica Ryoo  |   News & Events

Despite the many obstacles brought on by the pandemic, Collabora continues to build and strengthen its engineering and administration teams for the road ahead. Join us in welcoming Angelica, Raghavendra, Doug, Italo and Theodotos!

Welcoming five new Collaborans!

Monado: Multi-application support with XR_EXTX_overlay

June 30, 2020 by Lubosz Sarnecki  |   News & Events

The recent improvements in Monado like out of process compositing and multi-layer rendering released with v0.2 prepared the requirements to implement OpenXR's XR_EXTX_overlay extension.

Monado: Multi-application support with XR_EXTX_overlay

Embedded Linux & Open Source take the virtual stage

June 18, 2020 by Mark Filion  |   News & Events

Collabora will be presenting on five separate occasions during the virtual editions of Embedded Linux Conference North America and Open Source Summit North America, taking place later this month.

Embedded Linux & Open Source take the virtual stage

Kernel 5.7: Forging ahead, despite COVID-19

June 04, 2020 by Andrzej Pietrasiewicz  |   News & Events

This latest release is the first to contain development work accomplished amid the lockdown measures. Despite these significant changes, Collaborans have also been steadfast in their contributions, with multiple projects progressing.

Kernel 5.7: Forging ahead, despite COVID-19

Search the newsroom

Upcoming Events

Here are the online events we'll be attending in the coming weeks – join us!

Embedded Linux Conference Europe

26-28 October, Online

Open Source Summit Europe

26-28 October, Online

Khronos OpenXR Webinar

28 October, Online

Open Since 2005 logo

We use cookies on this website to ensure that you get the best experience. By continuing to use this website you are consenting to the use of these cookies. To find out more please follow this link.

Collabora Ltd © 2005-2020. All rights reserved. Privacy Notice. Sitemap.