News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

A growth year for upstream kernel contributions

December 22, 2021 by Gustavo Padovan  |   News & Events

With over 350 patches authored and nearly 200 reviewed and tested in multiple subsystems, 2021 was a great year for Linux kernel development at Collabora. Here is a look at some of our achievements during the year.

A growth year for upstream kernel contributions

Meet wxrd, a standalone Wayland compositor for xrdesktop

December 20, 2021 by Christoph Haag  |   News & Events

The Linux desktop in VR goes headless! Introducing wxrd, a standalone Wayland compositor for xrdesktop based on wlroots, with minimal dependencies.

Meet wxrd, a standalone Wayland compositor for xrdesktop

Open Source in Japan, virtually

December 08, 2021 by Mark Filion  |   News & Events

A year of online conferences that began with linux.conf.au will end on a high note next week as Collaborans present three talks at Open Source Summit Japan + Automotive Linux Summit 2021. Join us!

Open Source in Japan, virtually

Venus on QEMU: Enabling the new virtual Vulkan driver

November 26, 2021 by Antonio Caggiano  |   Blog

A step-by-step guide on how to enable 3D acceleration of Vulkan applications in QEMU through the new Venus experimental Vulkan driver for VirtIO-GPU with a local development environment.

Venus on QEMU: Enabling the new virtual Vulkan driver

Kernel 5.15: A small but mighty Halloween release

November 10, 2021 by Sebastian Reichel  |   News & Events

It might be smaller than the last few kernels, but with well above 10,000 non-merge changes, the latest Linux kernel release still packs a punch. Released on October 31, kernel 5.15 brings lots of exciting new features.

Kernel 5.15: A small but mighty Halloween release

WirePlumber in Fedora 35

November 02, 2021 by George Kiagiadakis  |   News & Events

Today marks a very exciting day as Fedora 35 has now been released, and with it comes WirePlumber as the default session manager for PipeWire! Under development by Collabora since 2019, WirePlumber has now entered the linux desktop space.

WirePlumber in Fedora 35

Run your own CI pipeline with GStreamer's new monorepo

October 26, 2021 by Xavier Claessens  |   Blog

Maintaining a non-trivial set of GStreamer patches can be tricky. Thanks to the recent move to a single, unified git repo, you can now easily run a GStreamer continuous integration pipeline on your own GitLab instance. Here's how.

Run your own CI pipeline with GStreamer's new monorepo

Improving test coverage for cameras in KernelCI

October 08, 2021 by Nícolas F. R. A. Prado  |   Blog

Earlier this year, I joined Collabora as an intern to work on improving testing in libcamera and automating it through KernelCI. Having recently completed the internship, here's a look back at this experience and what was accomplished.

Improving test coverage for cameras in KernelCI

A tale of two toolchains and glibc

September 30, 2021 by Adrian Ratiu  |   Blog

With the LLVM toolchain seeing increasing development and adoption alongside the older, more established GNU toolchain, projects needing to support both, in particular the GNU C library (glibc), are facing challenges and questions.

A tale of two toolchains and glibc

Open Source Summit + Embedded Linux Conference 2021

September 24, 2021 by Mark Filion  |   News & Events

Collaborans will be actively participating in next week's activities with seven talks on topics including Rust build scripts, embedded deep learning on GStreamer, HEVC decoding on mainline Linux, PipeWire and WirePlumber, and more.

Open Source Summit + Embedded Linux Conference 2021

Panfrost achieves OpenGL ES 3.1 conformance on Mali-G52

September 21, 2021 by Alyssa Rosenzweig  |   News & Events

This important milestone is a step forward for the open source driver, as it now certifies Panfrost for use in commercial products containing Mali G52 and paves the way for further conformance submissions on other Mali GPUs.

Panfrost achieves OpenGL ES 3.1 conformance on Mali-G52

Generate a minimal GStreamer build, tailored to your needs

September 16, 2021 by Stéphane Cerveau  |   News & Events

GStreamer can be tricky to ship in a constrained device. Thanks to a partnership with Huawei, you can now use gst-build to generate a minimal GStreamer build, tailored to a specific application, or set of applications. Here's how.

Generate a minimal GStreamer build, tailored to your needs

Constructor acquires, destructor releases

June 09, 2025 by Gustavo Noronha  |   Blog

In this final article based on Matt Godbolt's talk on making APIs easy to use and hard to misuse, I will discuss locking, an area where C++ has produced some interesting ideas, most notably something called RAII — Resource Acquisition Is Initialization.

Constructor acquires, destructor releases

What if C++ had decades to learn?

May 21, 2025 by Gustavo Noronha  |   Blog

In this second article of a three-part series, I look at how Matt Godbolt uses modern C++ features to try to protect against misusing an API that deals with destructive state transition based on a talk he gave on making code easy to use and hard to misuse.

What if C++ had decades to learn?

Unleashing gst-python-ml: Python-powered ML analytics for GStreamer pipelines

May 12, 2025 by Aaron Boxer  |   Blog

Powerful video analytics pipelines are easy to make when you're well-equipped. Combining GStreamer and Machine Learning frameworks are the perfect duo to run complex models across multiple streams.

Unleashing gst-python-ml: Python-powered ML analytics for GStreamer pipelines

Matt Godbolt sold me on Rust (by showing me C++)

May 06, 2025 by Gustavo Noronha  |   Blog

Gustavo Noronha helps break down C++ and shows how that knowledge can open up new possibilities with Rust.

Matt Godbolt sold me on Rust (by showing me C++)

Customizing WirePlumber's configuration for embedded systems

April 29, 2025 by George Kiagiadakis  |   Blog

Configuring WirePlumber on embedded Linux systems can be somewhat confusing. We take a moment to demystify this process for a particular use case.

Customizing WirePlumber's configuration for embedded systems

Evolving hardware, evolving demo: Collabora's Embedded World Board Farm

April 24, 2025 by Martyn Welch  |   Blog

Collabora's Board Farm demo, showcasing our recent hardware enablement and continuous integration efforts, has undergone serious development over the years. Here's a look at notable changes and improvements made for Embedded World 2025.

Evolving hardware, evolving demo: Collabora's Embedded World Board Farm

Implementing Bluetooth on embedded Linux: Open source BlueZ vs proprietary stacks

February 27, 2025 by George Kiagiadakis  |   Blog

If you are considering deploying BlueZ on your embedded Linux device, the benefits in terms of flexibility, community support, and long-term maintainability make it a worthwhile investment.

Implementing Bluetooth on embedded Linux: Open source BlueZ vs proprietary stacks

The state of GFX virtualization using virglrenderer

January 15, 2025 by Gert Wollny  |   Blog

With VirGL, Venus, and vDRM, virglrenderer offers three different approaches to obtain access to accelerated GFX in a virtual machine. Here are the latest updates around each of these approaches.

The state of GFX virtualization using virglrenderer

Faster inference: torch.compile vs TensorRT

December 19, 2024 by Vineet Suryan  |   Blog

In the world of deep learning optimization, two powerful tools stand out: torch.compile, PyTorch’s just-in-time (JIT) compiler, and NVIDIA’s TensorRT, a platform for high-performance deep learning inference.

Faster inference: torch.compile vs TensorRT

Mesa CI and the power of pre-merge testing

October 08, 2024 by Deborah Brouwer  |   Blog

Having multiple developers work on pre-merge testing distributes the process and ensures that every contribution is rigorously tested before merging.

Mesa CI and the power of pre-merge testing

A shifty tale about unit testing with Maxwell, NVK's backend compiler

August 15, 2024 by Faith Ekstrand  |   Blog

After rigorous debugging, a new unit testing framework was added to the backend compiler for NVK. This is a walkthrough of the steps taken to achieve this.

A shifty tale about unit testing with Maxwell, NVK's backend compiler

A journey towards reliable testing in the Linux Kernel

August 01, 2024 by Laura Nao  |   Blog

We're reflecting on the steps taken as we continually seek to improve Linux kernel integration. This will include more detail about the tests used to enhance the quality of testing processes and coverage.

A journey towards reliable testing in the Linux Kernel

Event: GStreamer Spring Hackfest 2016

May 13, 2016 by Mark Filion  |   News and Events

Starting today, 13 May, and throughout the weekend, four Collaborans will be attending the GStreamer Spring Hackfest 2016 in Thessaloniki, Greece!

Event: GStreamer Spring Hackfest 2016

Event: Apertis hands-on session, April 28

April 11, 2016 by Mark Filion  |   News and Events

On Thursday 28th of April in Paris, France Bosch and Collabora will be hosting the first Apertis hands-on session during the GENIVI AMM. The session will give everyone present an opportunity to work first hand with Apertis and produce applications to…

Event: Apertis hands-on session, April 28

News: Vulkan 1.0 specification released

February 16, 2016 by Mark Filion  |   News and Events

Today sees the public release of Vulkan 1.0, the next-generation graphics API from the Khronos Group. As a member of Khronos, Collabora has been committed to improving EGL, OpenGL ES and OpenGL itself, and this continues with Vulkan.

News: Vulkan 1.0 specification released

Event: ISE 2016

December 17, 2015 by Mark Filion  |   News and Events

Amsterdam, The Netherlands - from 09/02/2016 to 12/02/2016: We'll be exhibiting at ISE 2016, the world's largest tradeshow dedicated to professional AV and electronic systems integration. Collabora booth 8-K321

Event: ISE 2016

Event: systemd.conf 2015

October 28, 2015 by Mark Filion  |   News and Events

Berlin, Germany - from 05/11/2015 to 07/11/2015: The systemd.conf is the first conference devoted to the systemd project. It aims to bring developers, distribution packagers and devops professionals together to present, discuss, and work on that topics that will shape the future of the systemd project.

Event: systemd.conf 2015

Event: Web Engines Hackfest 2015

October 28, 2015 by Mark Filion  |   News and Events

A Coruña, Spain - from 07/12/2015 to 09/12/2015: The Web Engines Hackfest is a hacking oriented invitation-only event involving members from all parts of the Web Platform community, including those who work on Blink, WebKit, Gecko, and Servo.

Event: Web Engines Hackfest 2015

Event: GENIVI AMM Seoul 2015

October 13, 2015 by Guy Lunardi  |   News and Events

Seoul, South Korea - From 20/10/2015 to 23/10/2015: We will be exhibiting at the GENIVI Showcase during the All Member Meeting.

Event: GENIVI AMM Seoul 2015

Event: GStreamer Conference 2015

September 28, 2015 by Guy Lunardi  |   News and Events

Dublin, Ireland - from 08/10/2015 to 09/10/2015: The GStreamer Conference is a conference for anyone interested in the GStreamer multimedia framework or Open Source and cross-platform multimedia.

Event: GStreamer Conference 2015

Event: IBC 2015

September 05, 2015 by Guy Lunardi  |   News and Events

Amsterdam, The Netherlands - from 10/09/2015 to 15/09/2015: we are thrilled to be joining ARM to demonstrate our latest technology showcases together at their booth at IBC 2015. Booth Hall 4.C61

Event: IBC 2015

Event: LPC 2015

August 14, 2015 by Guy Lunardi  |   News and Events

Seattle, USA - from 19/08/2015 to 21/08/2015: The Linux Plumbers Conference (LPC) is a developer conference for those working on the “plumbing” of Linux.

Event: LPC 2015

Event: DebConf 2015

August 14, 2015 by Guy Lunardi  |   News and Events

Heidelberg, Germany - from 15/08/2015 to 22/08/2015: The 16th annual Debian developers meeting.

Event: DebConf 2015

Event: GStreamer Hackfest 2015

August 14, 2015 by Guy Lunardi  |   News and Events

Montpellier, France - from 14/08/2015 to 16/08/2015: GStreamer developers are meeting up to work on the project.

Event: GStreamer Hackfest 2015

Search the newsroom

Upcoming Events

Here are the events we'll be attending in the coming weeks – come say hello!

ICME

June 30-July 4, Nantes, France

 

AGL All Member Meeting

July 9-10, Berlin, Germany

 

DebConf

July 14-20, Brest, France

Featured Video

Open Since 2005 logo

Our website only uses a strictly necessary session cookie provided by our CMS system. To find out more please follow this link.

Collabora Limited © 2005-2025. All rights reserved. Privacy Notice. Sitemap.