August 02, 2022 by Cristian Ciocaltea | News & Events
As usual, there are quite a few changes merged into the mainline kernel. Let's take a look at some of the contributions by Collabora's kernel team!
July 07, 2022 by Gert Wollny | Blog
Adventures in NIR-land: the past, the present, and what's lies ahead for the native NIR back-end for Mesa's R600 driver.
July 05, 2022 by Marius Vlad | News & Events
The latest release of Weston was made on February 1, 2022. Meanwhile, a few bugs were discovered and we decided to do a bug-fix release, which we haven't had in several years.
June 21, 2022 by Kara Bembridge | News & Events
Part steadfast approach - part welcoming spirirt; Collabora continues to successfully expand with new talent amply on deck. Well ahead of the remote work curve, our new joiners have settled into their roles from their respective corners of the planet.
June 16, 2022 by Kara Bembridge | News & Events
Big events draw in an array of individuals to learn and connect, and the Open Source Summit North America is no exception. Jam-packed with sessions to uncover from June 21 to 24, this year's event features three talks by Collabora's very own!
June 15, 2022 by Manas Chaudhary | Blog
Getting PanVk, an open source driver for Arm Mali Midgard and Bifrost GPUs, closer to conformancy by implementing one of the core Vulkan features: support for secondary command buffers.
June 09, 2022 by Jason Ekstrand | Blog
After fighting with the divide between implicit and explicit synchronization with Vulkan on Linux for over seven years, we may finally have some closure. We're not to synchronization nirvana quite yet, but this is an important step along the way.
June 06, 2022 by Alyssa Rosenzweig | News & Events
Mali-G57 features in new MediaTek Chromebooks with the MT8192 and MT8195 system-on-chips. With Mesa 22.2 and an appropriate kernel, accelerated graphics will work out of the box on Linux on these laptops.
June 02, 2022 by Dmitry Osipenko | News & Events
Released by Linus Torvalds on May 22 after a busy two-month development cycle, Linux kernel 5.18 brings new features and lights up new hardware. Let's take a look at the contributions made by our engineering team.
May 31, 2022 by Moses Turner | Blog
Optical hand tracking for XR has a bit of a reputation - getting training data, training neural nets, and deploying them in real-time, low-latency environments such as XR is every bit as hard as they say it is.
May 26, 2022 by Kara Bembridge | News & Events
After a two-year hiatus, the City of Lights is shinning brightly again to welcome the community for a full week of engaging talks at Embedded Recipes and Kernel Recipes conferences.
August 27, 2018 by Robert Foss | Blog
Working with a git based project that has a defacto upstream repository means that you perioducally want to fetch the canonical master branch. This can be simplified with a .gitconfig alias.
August 21, 2018 by Emil Velikov | Blog
A look at the work and motivation behind implementing the Khronos EGLDevice extensions in Mesa. These extensions allow users of open source graphics drivers to cleanly describe & select which device to use in heterogeneous systems.
August 03, 2018 by Corentin Noël | Blog
GNOME Builder is an Integrated Development Environment designed for the GNOME ecosystem. It most notably features a deep integration to the Git version control system, allow to debug applications quickly and allow in-line documentation viewing.
August 01, 2018 by Robert Foss | Blog
Presenting a new, hardware-backed, software graphics driver, built upon the Mesa gallium driver framework, which uses kernel kms drm nodes for memory allocation.
July 04, 2018 by Arnaud Rebillout | Blog
Last week, a new version of docker.io, the Docker package provided by Debian, was uploaded to Debian Unstable. Quickly afterwards, the package moved to Debian Testing, the first time in two years that docker.io has migrated to "testing".
June 27, 2018 by Ana Guerrero López | Blog
In Debian and derivative systems, there are many ways to build images. The simplest tool of choice is often debootstrap. It works by downloading the .deb files from a mirror and unpacking them into a directory which can eventually be chrooted into.
June 25, 2018 by Olivier Crête | Blog
Launched by Haivision in 2017, and freely available on GitHub via the Mozilla Public License 2.0, SRT is an innovative UDP-based protocol enabling high-quality, low-latency video streaming across unpredictable networks.
June 11, 2018 by Omar Akkila | Blog
Embedded devices are a popular deployment target for GStreamer yet they are not tested on the project's Continuous Integration (CI) system. Here's a look at work done to introduce a Raspberry Pi for automated on-board testing using Jenkins, LAVA & more.
June 05, 2018 by Mark Filion | Blog
In late January 1998, Netscape surprised everyone by releasing the source for Communicator, its web browser, making it readily available to all. The marked a turning point, and the birth of a new term, in software development: Open Source.
May 29, 2018 by Omar Akkila | Blog
At the start of 2018 in January, I joined Collabora, an open source software consultancy, as a Software Engineer Intern with the Multimedia team. Reaching the end of that internship, I would like to take the time to share my experience.
May 18, 2018 by Zeeshan Ali | Blog
Earlier this month, Olivier Crête, Nicolas Dufresne, George Kiagiadakis & I attended the GStreamer Spring Hackfest in Lund, Sweden. Hosted by Axis, it was a great opportunity for the GStreamer community to touch base and work on open bugs and pet projects.
May 09, 2018 by Elie Tournier | Blog
A few months ago, Robert Foss wrote a blog post about virtualizing GPU Access. Here's a look at some of the major improvements that have landed upstream since then, including QEMU using OpenGL ES acceleration, as well as our plans for the future.
February 18, 2022 by Olivier Crête | News & Events
At the forefront of contributors for this latest release, our team's work focused on two areas in which we believe GStreamer shines the brightest: embedded systems, and network streaming, in particular WebRTC.
February 01, 2022 by Kara Bembridge | News & Events
Kicking off in a matter of days, this jam-packed weekend will host over 50 devrooms and nearly 700 talks including an in-depth look at Mobian: an open-source project aimed at bringing Debian GNU/Linux to mobile devices.
January 20, 2022 by André Almeida | News & Events
With kernel 5.16, the community has once again produced a release full of great features, including two projects that had been in development for some time by our kernel team: the new futex syscall and the new fanotify event.
January 11, 2022 by Mark Filion | News & Events
The new year has only just begun, and already our first conference of 2022 is on the horizon. Join us at linux.conf.au, as we discuss bringing WebM Alpha support to GStreamer, and provide a status update on the futex2 syscall.
December 22, 2021 by Gustavo Padovan | News & Events
With over 350 patches authored and nearly 200 reviewed and tested in multiple subsystems, 2021 was a great year for Linux kernel development at Collabora. Here is a look at some of our achievements during the year.
December 20, 2021 by Christoph Haag | News & Events
The Linux desktop in VR goes headless! Introducing wxrd, a standalone Wayland compositor for xrdesktop based on wlroots, with minimal dependencies.
December 08, 2021 by Mark Filion | News & Events
A year of online conferences that began with linux.conf.au will end on a high note next week as Collaborans present three talks at Open Source Summit Japan + Automotive Linux Summit 2021. Join us!
November 10, 2021 by Sebastian Reichel | News & Events
It might be smaller than the last few kernels, but with well above 10,000 non-merge changes, the latest Linux kernel release still packs a punch. Released on October 31, kernel 5.15 brings lots of exciting new features.
November 02, 2021 by George Kiagiadakis | News & Events
Today marks a very exciting day as Fedora 35 has now been released, and with it comes WirePlumber as the default session manager for PipeWire! Under development by Collabora since 2019, WirePlumber has now entered the linux desktop space.
September 24, 2021 by Mark Filion | News & Events
Collaborans will be actively participating in next week's activities with seven talks on topics including Rust build scripts, embedded deep learning on GStreamer, HEVC decoding on mainline Linux, PipeWire and WirePlumber, and more.
September 21, 2021 by Alyssa Rosenzweig | News & Events
This important milestone is a step forward for the open source driver, as it now certifies Panfrost for use in commercial products containing Mali G52 and paves the way for further conformance submissions on other Mali GPUs.
September 16, 2021 by Stéphane Cerveau | News & Events
GStreamer can be tricky to ship in a constrained device. Thanks to a partnership with Huawei, you can now use gst-build to generate a minimal GStreamer build, tailored to a specific application, or set of applications. Here's how.
Here are the events we'll be attending in the coming weeks – come say hello!
October 1-7, Barcelona, Spain
October 4-6, Minneapolis, MN, USA
October 11-13, London, UK
August 8-11, Phoenix, AZ, USA