News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

Profiling virtualized GPU acceleration with Perfetto

April 22, 2021 by Antonio Caggiano  |   Blog

Recently, we have been using Perfetto to successfully profile Apitrace traces in crosvm through VirGL renderer. We have now added perfetto instrumentation to VirGL renderer, Mesa, and Apitrace to see what happens precisely in a frame.

Profiling virtualized GPU acceleration with Perfetto

Continuous 3D Hand Pose Tracking using Machine Learning & Monado OpenXR

April 20, 2021 by Marcus Edel  |   Blog

As part of a project backed by INVEST-AI, a program managed by IVADO Labs, we have developed a multi-stage neural network-based solution that accurately locates and tracks the hands despite complex background noise and occlusion between hands.

Continuous 3D Hand Pose Tracking using Machine Learning & Monado OpenXR

An easy to use MTP implementation for your next embedded Linux project

April 13, 2021 by Andrzej Pietrasiewicz  |   Blog

Did you know you could run a permissively-licensed MTP implementation with minimal dependencies on an embedded device? Here's a step-by-step guide on how to easily run cmtp-responder on a Rock Pi 4 or any other board equipped with a UDC.

An easy to use MTP implementation for your next embedded Linux project

PanVk: An Open Source Vulkan driver for Arm Mali Midgard and Bifrost GPUs

March 25, 2021 by Boris Brezillon  |   News & Events

The Panfrost project started as a reverse engineering effort to understand Arm Mali Midgard and Bifrost GPU internals. With the driver getting more and more mature, the natural next step was to work on an Open Source Vulkan driver for those GPUs.

PanVk: An Open Source Vulkan driver for Arm Mali Midgard and Bifrost GPUs

Rust: integrating LLVM source-base code coverage with GitLab

March 24, 2021 by Guillaume Desmottes  |   Blog

Earlier this year, the Rust compiler gained support for LLVM source-base code coverage. In this post we'll explain how to setup a CI job in a Rust project to feed source-base coverage information to GitLab.

Rust: integrating LLVM source-base code coverage with GitLab

Linaro Virtual Connect - Spring 2021

March 22, 2021 by Mark Filion  |   News & Events

Join us this week at the Spring edition of Linaro Virtual Connect, as we discuss bringing stateless video decoding support to Linux, and take a look at where we are, and what's to come, for open drivers for Arm GPUs.

Linaro Virtual Connect - Spring 2021

Build and run GTK 4 applications with Visual Studio

March 18, 2021 by Xavier Claessens  |   Blog

Over the past few months, I've been working on a side project to improve Meson sub-project support. The best stress test is to build projects on Windows, without msys2, because it has no dependencies or tools installed (e.g. pkg-config).

Build and run GTK 4 applications with Visual Studio

OpenGL on DirectX: Conformance & upstreaming of the D3D12 driver

March 10, 2021 by Erik Faye-Lund  |   News & Events

One year ago, we announced a new partnership with Microsoft to build OpenGL mapping layers to DirectX 12. Today, we're excited to share that the we have passed the OpenGL 3.3 conformance tests, and have now upstreamed the D3D12 driver in Mesa 3D!

OpenGL on DirectX: Conformance & upstreaming of the D3D12 driver

New features, changes & improvements to KernelCI's UI

March 04, 2021 by Alexandra Pereira  |   Blog

The most complete automated testing and continuous integration tool for the Linux kernel continues to evolve at a rapid pace. Here's a look at the latest improvements to the KernelCI dashboard, the main web interface used by the project.

New features, changes & improvements to KernelCI's UI

Asymmetric Multi Processing with Linux & Zephyr on the STM32MP1

March 03, 2021 by Arnaud Ferraris  |   Blog

In the embedded world, many modern SoCs such as the ST Microelectronics STM32MP1 now include coprocessor cores which can be used for a wide range of tasks and can offload some of the work from the main processor.

Asymmetric Multi Processing with Linux & Zephyr on the STM32MP1

Wine on Wayland: An exciting first update

February 19, 2021 by Alexandros Frantzis  |   News & Events

Two months ago we announced a first proposal for a Wayland driver for Wine, the compatibility layer for Windows applications. Here's an update on this effort, which contains more details and instructions for building and running the Wayland driver.

Wine on Wayland: An exciting first update

New year, new kernel: Collabora's contributions to Linux 5.11

February 17, 2021 by Ezequiel Garcia  |   News & Events

The first kernel release of 2021 brings a number of highlights contributed by Collaborans, including the new Syscall User Dispatch mechanism, and the destaging of both the H.264 stateless decoding interface and the Rockchip ISP driver.

New year, new kernel: Collabora's contributions to Linux 5.11

An introduction to Linux kernel initcalls

July 14, 2020 by Mylène Josserand  |   Blog

Initcalls, which serve to call functions during boot, were implemented early on in the development of the Linux Kernel. Read on as we take a closer look, including their purpose, their usage, ways to debug them (using initcall_debug or FTrace), and more.

An introduction to Linux kernel initcalls

Deep dive into OpenGL over DirectX layering

July 09, 2020 by Louis-Francis Ratté-Boulianne  |   Blog

Earlier this year, we announced a new project with Microsoft: the implementation of OpenCL & OpenGL to DirectX translation layers. Here's the latest on this work, including the steps taken to improve the performance of the OpenGL-On-D3D12 driver.

Deep dive into OpenGL over DirectX layering

Using syzkaller, part 4: Driver fuzzing

June 26, 2020 by Ricardo Cañuelo Navarro  |   Blog

Syzkaller is much needed tool for Linux kernel testing and debugging. With some work, it can also be enhanced to find bugs in specific drivers, such as V4L2. Here's how.

Using syzkaller, part 4: Driver fuzzing

Cross building Rust GStreamer plugins for the Raspberry Pi

June 23, 2020 by Guillaume Desmottes  |   Blog

Previously, we discussed about how Rust can be a great language for embedded programming. In this article, we'll explain an easy setup to cross build Rust code depending on system libraries, a common requirement when working on embedded systems.

Cross building Rust GStreamer plugins for the Raspberry Pi

Generating MPEG-DASH streams for Open Source adaptive streaming with GStreamer

June 12, 2020 by Stéphane Cerveau  |   Blog

Adaptive streaming is a technique to provide flexibility and scalability by offering variable bit-rate streams to the client. Here's a quick guide on how to generate a MPEG-DASH stream (the most completely adaptive streaming technique) using GStreamer.

Generating MPEG-DASH streams for Open Source adaptive streaming with GStreamer

Bifrost meets GNOME: Onward & upward to zero graphics blobs

June 05, 2020 by Alyssa Rosenzweig  |   Blog

With only free software, a Mali G31 chip can now run Wayland compositors with zero-copy graphics, including GNOME 3. We can run every scene in glmark2-es2, 3D games like Neverball can be played, and video players mpv and Kodi are now supported.

Bifrost meets GNOME: Onward & upward to zero graphics blobs

Using regmaps to make Linux drivers more generic

May 27, 2020 by Adrian Ratiu  |   Blog

Device drivers can support more revisions and SoC platforms by abstracting away specific hardware interface layouts. Let's examine a specific instance of this process, namely the effort to make the MIPI DSI host controller driver more generic.

Using regmaps to make Linux drivers more generic

Cross-compiling with gst-build and GStreamer

May 15, 2020 by Stéphane Cerveau  |   Blog

gst-build is one of the main build systems used by the community to develop the GStreamer platform. In my last blog post, I presented gst-build and explained how to get started with it. Now, let's get straight to the point regarding cross-compilation.

Cross-compiling with gst-build and GStreamer

Using syzkaller, part 3: Fuzzing your changes

May 12, 2020 by Andre Almeida  |   Blog

In part 2 of this series on syzkaller, we looked at how to install the tool and use it to improve our code base. Now, how does syzkaller report a bug it finds in the execution path of a system call? Let's add a new syscall description and see how it goes.

Using syzkaller, part 3: Fuzzing your changes

WirePlumber, the PipeWire session manager

May 07, 2020 by George Kiagiadakis  |   Blog

An in-depth look at WirePlumber, the modular and extensible session manager for PipeWire that brings advanced device management, policy control and security enforcement capabilities.

WirePlumber, the PipeWire session manager

Reducing the size of a Rust GStreamer plugin

April 28, 2020 by Guillaume Desmottes  |   Blog

With Rust gaining traction among the GStreamer community as an alternative to C to write applications and plugins, we began wondering, could the size of such Rust plugins be a problem for embedded systems?

Reducing the size of a Rust GStreamer plugin

From Bifrost to Panfrost - deep dive into the first render

April 23, 2020 by Alyssa Rosenzweig  |   Blog

The Panfrost project building a free, Open Source graphics driver for modern Mali GPUs has reached a new milestone: the first 3D render, including basic texture support, on a Bifrost chip (Mali G31)!

From Bifrost to Panfrost - deep dive into the first render

Event: IBC 2014

August 14, 2014 by Guy Lunardi  |   News and Events

Amsterdam, The Netherlands September 12-16, 2014: the essential global meeting place for everyone engaged in creating, managing and delivering the future of electronic media and entertainment technology and content. Collabora booth #8.B38c

Event: IBC 2014

Event: SIGGRAPH 2014

August 11, 2014 by Guy Lunardi  |   News and Events

Vancouver, Canada August 12-14, 2014: SIGGRAPH, visit ARM at Booth #933 in the Mobile Pavilion to meet with Collabora. SIGGRAPH attracts 20,000 international attendees from across the globe and many creative and technical disciplines. It is the only…

Event: SIGGRAPH 2014

News: In Cambridge, England 2014

August 05, 2014 by Guy Lunardi  |   News and Events

Cambridge, England August 5-8, 2014: With so many silicon vendors and OEMs visiting Cambridge England, August 5-8 transforms the univeristy town into the world's center of innovation for one week. Cambridge in August attracts international leaders in…

News: In Cambridge, England 2014

News: Raspberry Pi Today Interview

July 17, 2014 by Guy Lunardi  |   News and Events

Raspberry Pi Today interviews Collabora's Daniel Stone about Collabora and the Raspberry Pi Foundation's work on Wayland and WebKit.

News: Raspberry Pi Today Interview

Event: Automotive Linux Summit

June 19, 2014 by Guy Lunardi  |   News and Events

Tokyo, Japan July 1-2, 2014: The Automotive Linux Summit will bring together the most innovative minds from automotive expertise and open-source excellence.

Event: Automotive Linux Summit

News: New Collabora website launches

June 19, 2014 by Guy Lunardi  |   News and Events

Collabora introduces our new brand and logo

News: New Collabora website launches

Press release: Collabora Brings Wayland...

May 23, 2013 by Guy Lunardi  |   News and Events

Press release: Collabora Brings Wayland...

Search the newsroom

Upcoming Events

Here are the online events we'll be attending in the coming weeks – join us!

DjangoCon Europe

2-6 June, Online

Live Embedded Event

3 June, Online

Akademy 2021

18-25 June, Online

Open Since 2005 logo

We use cookies on this website to ensure that you get the best experience. By continuing to use this website you are consenting to the use of these cookies. To find out more please follow this link.

Collabora Ltd © 2005-2021. All rights reserved. Privacy Notice. Sitemap.

Collabora Limited is registered in England and Wales. Company Registration number: 5513718. Registered office: The Platinum Building, St John's Innovation Park, Cambridge, CB4 0DS, United Kingdom. VAT number: 874 1630 19.