News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

An introduction to Linux kernel initcalls

July 14, 2020 by Mylène Josserand  |   Blog

Initcalls, which serve to call functions during boot, were implemented early on in the development of the Linux Kernel. Read on as we take a closer look, including their purpose, their usage, ways to debug them (using initcall_debug or FTrace), and more.

An introduction to Linux kernel initcalls

Deep dive into OpenGL over DirectX layering

July 09, 2020 by Louis-Francis Ratté-Boulianne  |   Blog

Earlier this year, we announced a new project with Microsoft: the implementation of OpenCL & OpenGL to DirectX translation layers. Here's the latest on this work, including the steps taken to improve the performance of the OpenGL-On-D3D12 driver.

Deep dive into OpenGL over DirectX layering

Welcoming five new Collaborans!

July 09, 2020 by Erica Ryoo  |   News & Events

Despite the many obstacles brought on by the pandemic, Collabora continues to build and strengthen its engineering and administration teams for the road ahead. Join us in welcoming Angelica, Raghavendra, Doug, Italo and Theodotos!

Welcoming five new Collaborans!

Monado: Multi-application support with XR_EXTX_overlay

June 30, 2020 by Lubosz Sarnecki  |   News & Events

The recent improvements in Monado like out of process compositing and multi-layer rendering released with v0.2 prepared the requirements to implement OpenXR's XR_EXTX_overlay extension.

Monado: Multi-application support with XR_EXTX_overlay

Using syzkaller, part 4: Driver fuzzing

June 26, 2020 by Ricardo Cañuelo Navarro  |   Blog

Syzkaller is much needed tool for Linux kernel testing and debugging. With some work, it can also be enhanced to find bugs in specific drivers, such as V4L2. Here's how.

Using syzkaller, part 4: Driver fuzzing

Cross building Rust GStreamer plugins for the Raspberry Pi

June 23, 2020 by Guillaume Desmottes  |   Blog

Previously, we discussed about how Rust can be a great language for embedded programming. In this article, we'll explain an easy setup to cross build Rust code depending on system libraries, a common requirement when working on embedded systems.

Cross building Rust GStreamer plugins for the Raspberry Pi

Embedded Linux & Open Source take the virtual stage

June 18, 2020 by Mark Filion  |   News & Events

Collabora will be presenting on five separate occasions during the virtual editions of Embedded Linux Conference North America and Open Source Summit North America, taking place later this month.

Embedded Linux & Open Source take the virtual stage

Generating MPEG-DASH streams for Open Source adaptive streaming with GStreamer

June 12, 2020 by Stéphane Cerveau  |   Blog

Adaptive streaming is a technique to provide flexibility and scalability by offering variable bit-rate streams to the client. Here's a quick guide on how to generate a MPEG-DASH stream (the most completely adaptive streaming technique) using GStreamer.

Generating MPEG-DASH streams for Open Source adaptive streaming with GStreamer

Bifrost meets GNOME: Onward & upward to zero graphics blobs

June 05, 2020 by Alyssa Rosenzweig  |   Blog

With only free software, a Mali G31 chip can now run Wayland compositors with zero-copy graphics, including GNOME 3. We can run every scene in glmark2-es2, 3D games like Neverball can be played, and video players mpv and Kodi are now supported.

Bifrost meets GNOME: Onward & upward to zero graphics blobs

Kernel 5.7: Forging ahead, despite COVID-19

June 04, 2020 by Andrzej Pietrasiewicz  |   News & Events

This latest release is the first to contain development work accomplished amid the lockdown measures. Despite these significant changes, Collaborans have also been steadfast in their contributions, with multiple projects progressing.

Kernel 5.7: Forging ahead, despite COVID-19

Google Summer of Code 2020

June 01, 2020 by Mark Filion  |   News & Events

Coding hss begun for this year's Google Summer of Code (GSoC) projects, announced earlier last month. The 2020 edition selected 1,199 students from 66 countries, to work with 199 mentoring organizations over the course of the summer.

Google Summer of Code 2020

Monado OpenXR runtime development gaining momentum: version 0.2, multi-layer support & more!

May 29, 2020 by Jakob Bornecrantz  |   News & Events

With the excellent (online) edition of Augmented World Expo 2020 in full swing this week, what better time to announce version 0.2 of the Monado OpenXR runtime for Linux. It's been a very busy three months since the last Monado developer update!

Monado OpenXR runtime development gaining momentum: version 0.2, multi-layer support & more!

Quick hack: Building ChromiumOS for QEMU

December 01, 2017 by Robert Foss  |   Blog

Getting ChromiumOS building is reasonably easy, but running it under QEMU requires some work. Here's a guide to help you build all of the software needed to do so.

Quick hack: Building ChromiumOS for QEMU

Running Chromium with Ozone-GBM on a GNU/Linux desktop

November 27, 2017 by Alexandros Frantzis  |   Blog

Ozone is Chromium’s next-gen platform abstraction layer for graphics and input. When developing either Ozone itself or an application that uses Ozone, it is often beneficial to be able to run the code on the development machine, which is usually a typical…

Running Chromium with Ozone-GBM on a GNU/Linux desktop

ipcpipeline: Splitting a GStreamer pipeline into multiple processes

November 17, 2017 by George Kiagiadakis  |   Blog

Earlier this year I worked on a certain GStreamer plugin that is called “ipcpipeline”. This plugin provides elements that make it possible to interconnect GStreamer pipelines that run in different processes. In this blog post I am going to explain how…

ipcpipeline: Splitting a GStreamer pipeline into multiple processes

Quick hack: Experiments with crosvm

November 09, 2017 by Tomeu Vizoso  |   Blog

Running crosvm outside Chromium OS is quite easy, with the only complication being that minijail isn't widely packaged in distros. In these instructions, we hack around the issue with linker environment variables so we don't have to install it properly.

Quick hack: Experiments with crosvm

Tracing memory leaks in the NFC Digital Protocol stack

November 06, 2017 by Thierry Escande  |   Blog

Kmemleak allows you to track possible memory leaks inside the Linux kernel. Basically, it tracks dynamically allocated memory blocks in the kernel and reports those without any reference left and that are therefore impossible to free.

Tracing memory leaks in the NFC Digital Protocol stack

Who knew we still had low-hanging fruit?

October 17, 2017 by Gustavo Noronha  |   Blog

Earlier this month I had the pleasure of attending the Web Engines Hackfest, hosted by Igalia at their offices in A Coruña, and also sponsored by my employer, Collabora, Google and Mozilla. It has grown a lot and we had many new people this year.

Who knew we still had low-hanging fruit?

Performance analysis in Linux (continued)

October 06, 2017 by Gabriel Krisman Bertazi  |   Blog

In this post, I will show one more example of how easy it is to disrupt performance of a modern CPU, and also run a quick discussion on why performance matters - as well as present a few cases where it shouldn't matter.

Performance analysis in Linux (continued)

XDC 2017 - Links to recorded presentations (videos)

September 23, 2017 by Guy Lunardi  |   Blog

Many thanks to Google for recording all the XDC2017 talks. To make them easier to watch, here are direct links to each talk recorded at XDC2017.

XDC 2017 - Links to recorded presentations (videos)

DebConf 17: Flatpak and Debian

August 17, 2017 by Simon McVittie  |   Blog

Last week, I attended DebConf 17 in Montréal, returning to DebConf for the first time in 10 years (last time was DebConf 7 in Edinburgh). It was great to put names to faces and meet more of my co-developers in person!

DebConf 17: Flatpak and Debian

Android: NXP i.MX6 on Etnaviv Update

July 24, 2017 by Robert Foss  |   Blog

More progress is being made in the area of i.MX6, etnaviv and Android. Since the last post a lot work has gone into upstreaming and stabilizing the etnaviv on Android ecosystem. This has involved Android, kernel and Mesa changes, many of which are available…

Android: NXP i.MX6 on Etnaviv Update

vkmark: more than a Vulkan benchmark

July 18, 2017 by Alexandros Frantzis  |   Blog

Ever since Vulkan was announced a few years ago, the idea of creating a Vulkan benchmarking tool in the spirit of glmark2 had been floating in my mind. Recently, thanks to my employer, Collabora, this idea has materialized! The result is the vkmark Vulkan…

vkmark: more than a Vulkan benchmark

Quick hack: Performance debugging Linux graphics on Mesa

June 29, 2017 by Robert Foss  |   Blog

Debugging graphics performance in a simple and high-level manner is possible for all Gallium based Mesa drivers using GALLIUM_HUD, a feature that adds performance graphs to applications.

Quick hack: Performance debugging Linux graphics on Mesa

Collabora at FOSDEM 2017

January 31, 2017 by Mark Filion  |   News and Events

We're headed to Brussels, Belgium for FOSDEM 2017, the two-day event organized by volunteers to promote the widespread use of free and open source software.

Collabora at FOSDEM 2017

GStreamer meets HotDoc

November 29, 2016 by Mark Filion  |   News and Events

Some exciting news today as GStreamer launches its redesigned documentation site, complete with dynamic navigation, search function and new tutorials. This new iteration is powered by HotDoc, a tool created by Collabora's Mathieu Duponchelle!

GStreamer meets HotDoc

Linux Plumbers Conference 2016

October 26, 2016 by Mark Filion  |   News and Events

Collabora is proud to be once again sponsoring the annual Linux Plumbers Conference, the developer conference that brings together the top developers working on the “plumbing” of Linux: kernel subsystems, core libraries, windowing systems, etc.

Linux Plumbers Conference 2016

GStreamer Conference 2016

October 07, 2016 by Mark Filion  |   News and Events

Collabora is proud to be a Platinum Sponsor of this year's GStreamer Conference, taking place at the Betahaus in Berlin, Germany on 10-11 October 2016. Come say hello, or catch one of the four presentations given by Collaborans during the conference!

GStreamer Conference 2016

Upcoming events - Fall 2016

September 19, 2016 by Mark Filion  |   News and Events

This fall, we're thrilled to be sponsoring not one, but five great conferences!

Upcoming events - Fall 2016

Event: IBC 2016

September 05, 2016 by Mark Filion  |   News and Events

Collabora will be exhibiting at IBC 2016, the premier annual event for professionals engaged in the creation, management and delivery of entertainment and news content worldwide.

Event: IBC 2016

Event: DebConf16

June 30, 2016 by Mark Filion  |   News and Events

Collabora is proud to be sponsoring DebConf16, the annual Debian developers meeting, taking place in Cape Town, South Africa, from 2 July to 9 July 2016.

Event: DebConf16

News: GStreamer leaks tracer

June 22, 2016 by Mark Filion  |   News and Events

At Collabora, our multimedia team is always looking to improve QA tools in GStreamer. This week, we're introducing a new QA tool: a GStreamer tracer to track leaked objects.

News: GStreamer leaks tracer

Event: InfoComm 2016

June 07, 2016 by Mark Filion  |   News and Events

Collabora will be exhibiting at InfoComm 2016, the largest, most exciting event in the United States focused on the pro-AV industry, in Last Vegas on June 8-10, 2016.

Event: InfoComm 2016

News: Linux Kernel 4.6

May 18, 2016 by Mark Filion  |   News and Events

Linux Kernel 4.6 was released this week, with a total of 9 Collabora engineers taking part in its development, Collabora’s highest number of engineers contributing to a single Linux Kernel release yet!

News: Linux Kernel 4.6

Event: GStreamer Spring Hackfest 2016

May 13, 2016 by Mark Filion  |   News and Events

Starting today, 13 May, and throughout the weekend, four Collaborans will be attending the GStreamer Spring Hackfest 2016 in Thessaloniki, Greece!

Event: GStreamer Spring Hackfest 2016

Event: Apertis hands-on session, April 28

April 11, 2016 by Mark Filion  |   News and Events

On Thursday 28th of April in Paris, France Bosch and Collabora will be hosting the first Apertis hands-on session during the GENIVI AMM. The session will give everyone present an opportunity to work first hand with Apertis and produce applications to…

Event: Apertis hands-on session, April 28

Search the newsroom

Upcoming Events

Here are the online events we'll be attending in the coming weeks – join us!

Akademy 2020

4-11 September, Online

IBC Showcase

8-11 September, Online

X.Org Developers Conference

16-18 September, Online

Open Since 2005 logo

We use cookies on this website to ensure that you get the best experience. By continuing to use this website you are consenting to the use of these cookies. To find out more please follow this link.

Collabora Ltd © 2005-2020. All rights reserved. Privacy Notice. Sitemap.