News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

An easy to use MTP implementation for your next embedded Linux project

April 13, 2021 by Andrzej Pietrasiewicz  |   Blog

Did you know you could run a permissively-licensed MTP implementation with minimal dependencies on an embedded device? Here's a step-by-step guide on how to easily run cmtp-responder on a Rock Pi 4 or any other board equipped with a UDC.

An easy to use MTP implementation for your next embedded Linux project

PanVk: An Open Source Vulkan driver for Arm Mali Midgard and Bifrost GPUs

March 25, 2021 by Boris Brezillon  |   News & Events

The Panfrost project started as a reverse engineering effort to understand Arm Mali Midgard and Bifrost GPU internals. With the driver getting more and more mature, the natural next step was to work on an Open Source Vulkan driver for those GPUs.

PanVk: An Open Source Vulkan driver for Arm Mali Midgard and Bifrost GPUs

Rust: integrating LLVM source-base code coverage with GitLab

March 24, 2021 by Guillaume Desmottes  |   Blog

Earlier this year, the Rust compiler gained support for LLVM source-base code coverage. In this post we'll explain how to setup a CI job in a Rust project to feed source-base coverage information to GitLab.

Rust: integrating LLVM source-base code coverage with GitLab

Linaro Virtual Connect - Spring 2021

March 22, 2021 by Mark Filion  |   News & Events

Join us this week at the Spring edition of Linaro Virtual Connect, as we discuss bringing stateless video decoding support to Linux, and take a look at where we are, and what's to come, for open drivers for Arm GPUs.

Linaro Virtual Connect - Spring 2021

Build and run GTK 4 applications with Visual Studio

March 18, 2021 by Xavier Claessens  |   Blog

Over the past few months, I've been working on a side project to improve Meson sub-project support. The best stress test is to build projects on Windows, without msys2, because it has no dependencies or tools installed (e.g. pkg-config).

Build and run GTK 4 applications with Visual Studio

OpenGL on DirectX: Conformance & upstreaming of the D3D12 driver

March 10, 2021 by Erik Faye-Lund  |   News & Events

One year ago, we announced a new partnership with Microsoft to build OpenGL mapping layers to DirectX 12. Today, we're excited to share that the we have passed the OpenGL 3.3 conformance tests, and have now upstreamed the D3D12 driver in Mesa 3D!

OpenGL on DirectX: Conformance & upstreaming of the D3D12 driver

New features, changes & improvements to KernelCI's UI

March 04, 2021 by Alexandra Pereira  |   Blog

The most complete automated testing and continuous integration tool for the Linux kernel continues to evolve at a rapid pace. Here's a look at the latest improvements to the KernelCI dashboard, the main web interface used by the project.

New features, changes & improvements to KernelCI's UI

Asymmetric Multi Processing with Linux & Zephyr on the STM32MP1

March 03, 2021 by Arnaud Ferraris  |   Blog

In the embedded world, many modern SoCs such as the ST Microelectronics STM32MP1 now include coprocessor cores which can be used for a wide range of tasks and can offload some of the work from the main processor.

Asymmetric Multi Processing with Linux & Zephyr on the STM32MP1

Wine on Wayland: An exciting first update

February 19, 2021 by Alexandros Frantzis  |   News & Events

Two months ago we announced a first proposal for a Wayland driver for Wine, the compatibility layer for Windows applications. Here's an update on this effort, which contains more details and instructions for building and running the Wayland driver.

Wine on Wayland: An exciting first update

New year, new kernel: Collabora's contributions to Linux 5.11

February 17, 2021 by Ezequiel Garcia  |   News & Events

The first kernel release of 2021 brings a number of highlights contributed by Collaborans, including the new Syscall User Dispatch mechanism, and the destaging of both the H.264 stateless decoding interface and the Rockchip ISP driver.

New year, new kernel: Collabora's contributions to Linux 5.11

Adding HEVC/H.265 support for NXP's i.MX 8M

February 17, 2021 by Benjamin Gaignard  |   Blog

Our recent efforts on the Hantro kernel driver have resulted in the addition of H.264 decoding support and multiple performance improvements. We are now introducing High Efficiency Video Coding, also known as H.265, decoding support on NXP's i.MX8 M.

Adding HEVC/H.265 support for NXP's i.MX 8M

Monado 21.0.0, an officially conformant OpenXR implementation!

February 15, 2021 by Jakob Bornecrantz  |   News & Events

Monado, the OpenXR runtime for Linux, is now officially conformant! In recognition of this milestone, a first major release version of the OpenXR runtime for Linux is now available, bringing with it a SteamVR driver!

Monado 21.0.0, an officially conformant OpenXR implementation!

Building GStreamer text rendering and overlays on Windows with gst-build

September 28, 2020 by Aaron Boxer  |   Blog

GStreamer relies on various 2D font rendering and layout libraries such as Pango and Cairo to generate text for the Pango plugin, which contains elements such as textoverlay. Here's how to add the Pango plugin to a gst-build installation on Windows.

Building GStreamer text rendering and overlays on Windows with gst-build

Initcalls, part 2: Digging into implementation

September 25, 2020 by Mylène Josserand  |   Blog

In this second part of this blog post series on Linux kernel initcalls, we'll go deeper into implementation, with a look at the colorful __device_initcall() macro, the rootfs initcall, and how modules can be executed.

Initcalls, part 2: Digging into implementation

Open Source meets Super Resolution, part 1

September 21, 2020 by Marcus Edel  |   Blog

Introducing an accurate and light-weight deep network for video super-resolution upscaling, running on a completely open source software stack using Panfrost, the free and open-source graphics driver for Mali GPUs.

Open Source meets Super Resolution, part 1

Integrating libcamera into PipeWire

September 11, 2020 by Raghavendra Rao  |   Blog

PipeWire continues to evolve with the recent integration of libcamera, a library to support complex cameras. In this blog post, I'll explain why libcamera exists, what it does, and how we integrated it in PipeWire.

Integrating libcamera into PipeWire

Pushing pixels to your Chromebook

August 31, 2020 by Emil Velikov  |   Blog

A high-level introduction of the Linux graphics stack, how it is used within ChromeOS, and the work done to improve software rendering (while simultaneously improving GPU rendering by reducing the boilerplate needed in applications).

Pushing pixels to your Chromebook

Using the Linux kernel's Case-insensitive feature in Ext4

August 27, 2020 by Gabriel Krisman Bertazi  |   Blog

Last year, a (controversial) feature was added to the Linux kernel to support optimized case-insensitive file name lookups in the Ext4 filesystem. Here's a look at why this was merged, what improvements have been made since, and how to put it to work.

Using the Linux kernel's Case-insensitive feature in Ext4

Panfrost performance counters with Perfetto

August 21, 2020 by Antonio Caggiano  |   Blog

We have now integrated Mali GPU hardware counters supported by Panfrost with Perfetto's tracing SDK, unlocking all-in-one graphics-aware profiling on Panfrost systems!

Panfrost performance counters with Perfetto

High bitrate video streaming with GStreamer's RTP elements

August 20, 2020 by Antonio Ospite  |   Blog

Key performance improvements and fixes to GStreamer's RTP stack have landed in GStreamer 1.18, due in the coming months. The latest enhancements provide an important boost in throughput, opening the gate to high bitrate video streaming.

High bitrate video streaming with GStreamer's RTP elements

Understanding computer vision & AI, part 1

August 13, 2020 by Marcus Edel  |   Blog

Following our recent presentation at OSSummit, many showed interest in learning more about solving real-world problems with computer vision. Here is a new blog series, on computer vision, object detection, and building a system on the edge.

Understanding computer vision & AI, part 1

Testing Weston DRM/KMS backends with virtme and VKMS

August 07, 2020 by Leandro Ribeiro  |   Blog

Recent work in Weston, the industry-standard Wayland compositor, has enabled DRM/KMS backends to be tested in the absence of real hardware, enabling more battle testing of corner-case and error conditions within automated testing frameworks.

Testing Weston DRM/KMS backends with virtme and VKMS

An introduction to Linux kernel initcalls

July 14, 2020 by Mylène Josserand  |   Blog

Initcalls, which serve to call functions during boot, were implemented early on in the development of the Linux Kernel. Read on as we take a closer look, including their purpose, their usage, ways to debug them (using initcall_debug or FTrace), and more.

An introduction to Linux kernel initcalls

Deep dive into OpenGL over DirectX layering

July 09, 2020 by Louis-Francis Ratté-Boulianne  |   Blog

Earlier this year, we announced a new project with Microsoft: the implementation of OpenCL & OpenGL to DirectX translation layers. Here's the latest on this work, including the steps taken to improve the performance of the OpenGL-On-D3D12 driver.

Deep dive into OpenGL over DirectX layering

Kernel 5.10: Rockchip, H.264, Bifrost & more!

December 14, 2020 by Ricardo Cañuelo Navarro  |   News & Events

Even amidst the chaos and uncertainty that 2020 brought, Linux Kernel development keeps moving forward at a constant and relentless pace. Collabora remains active, developing, maintaining, documenting and testing many parts of the kernel.

Kernel 5.10: Rockchip, H.264, Bifrost & more!

Linux App Summit 2020

November 12, 2020 by Mark Filion  |   News & Events

Starting today, and running until Saturday, join us at Linux App Summit for a look at Linux graphics, PipeWire, our work with Valve, and a virtual office hour with our Engineering Manager!

Linux App Summit 2020

Monado update: Passing conformance, Android support & more

November 02, 2020 by Jakob Bornecrantz  |   News & Events

Monado 0.4 OpenXR runtime introduces initial support for Android and passes all of the OpenXR conformance tests with both OpenGL and Vulkan on desktop with a simulated device.

Monado update: Passing conformance, Android support & more

Open Source Summit Europe & ELCE 2020

October 22, 2020 by Mark Filion  |   News & Events

The 4-day event is dedicated to everything open source and will showcase a program of 250+ talks. Collaborans will once again be actively participating in the week's activities, with no less than eight presentations, a BoF on KernelCI, and two panel discussions!

Open Source Summit Europe & ELCE 2020

Kernel 5.9: Onwards and upwards

October 22, 2020 by Mylène Josserand  |   News & Events

Collaborans continue to be very active in the Linux kernel, authoring over 150 commits in this release. Here's a look at the improvements, and new features, contributed by our team, notably in hardware support, multimedia, graphics and testing.

Kernel 5.9: Onwards and upwards

Collabora & GStreamer 1.18

October 06, 2020 by Stéphane Cerveau  |   News & Events

A move to GitLab. A switch to the powerful Meson build system. A fast and reliable CI system implemented. The GStreamer community has been busy, bringing a bevy of enhancements to 1.18. Here's a look at the key contributions by Collaborans.

Collabora & GStreamer 1.18

X.Org Developer's Conference 2020

September 15, 2020 by Mark Filion  |   News & Events

The lineup of great virtual conferences continues this week with the 2020 edition of X.Org Developer's Conference (XDC), the leading event for developers working on all things Open graphics, including the Linux kernel, Mesa, DRM, Wayland and X11.

X.Org Developer's Conference 2020

One week, two events: DebConf20 & Linux Plumbers Conference

August 24, 2020 by Mark Filion  |   News & Events

August ends on a high note with two virtual events this week: DebConf20, Debian's annual conference, and Linux Plumbers Conference, the premier event for developers working at all levels of the Linux kernel's plumbing layer and beyond.

One week, two events: DebConf20 & Linux Plumbers Conference

Kernel 5.8: Collabora's biggest & most significant contributions yet!

August 05, 2020 by Dafna Hirschfeld  |   News & Events

The ability for a relatively small software consultancy to contribute at this level demonstrates a fantastic improvement in vendors' mindset when it comes to working Open First and providing mainline support out-of-box as early as possible.

Kernel 5.8: Collabora's biggest & most significant contributions yet!

Lighthouse positional tracking in Monado with libsurvive

July 17, 2020 by Christoph Haag  |   News & Events

HTC Vive (Pro) and Valve Index hardware users can now experiment with positional tracking in Monado, thanks to the implementation of a libsurvive driver using the libsurvive library developed by Charles Lohr, David Berger and many contributors.

Lighthouse positional tracking in Monado with libsurvive

WirePlumber 0.3 released, now ready for the desktop

July 16, 2020 by George Kiagiadakis  |   News & Events

It is with great pleasure that we announce the availability of WirePlumber (the PipeWire session manager) version 0.3.0. This release brings support for desktop use cases and is a working drop-in replacement for PipeWire's example session manager.

WirePlumber 0.3 released, now ready for the desktop

Welcoming five new Collaborans!

July 09, 2020 by Erica Ryoo  |   News & Events

Despite the many obstacles brought on by the pandemic, Collabora continues to build and strengthen its engineering and administration teams for the road ahead. Join us in welcoming Angelica, Raghavendra, Doug, Italo and Theodotos!

Welcoming five new Collaborans!

Search the newsroom

Upcoming Events

Here are the online events we'll be attending in the coming weeks – join us!

DjangoCon Europe

2-6 June, Online

Live Embedded Event

3 June, Online

Akademy 2021

18-25 June, Online

Open Since 2005 logo

We use cookies on this website to ensure that you get the best experience. By continuing to use this website you are consenting to the use of these cookies. To find out more please follow this link.

Collabora Ltd © 2005-2021. All rights reserved. Privacy Notice. Sitemap.

Collabora Limited is registered in England and Wales. Company Registration number: 5513718. Registered office: The Platinum Building, St John's Innovation Park, Cambridge, CB4 0DS, United Kingdom. VAT number: 874 1630 19.