July 26, 2018 by Mark Filion | News & Events
Collabora is heading East to sponsor & attend DebConf18, the annual Debian conference! The week-long event takes place for the first time in Asia, at the National Chiao Tung University Microelectronics & Information Research Center, in Hsinchu Taiwan.
July 04, 2018 by Arnaud Rebillout | Blog
Last week, a new version of docker.io, the Docker package provided by Debian, was uploaded to Debian Unstable. Quickly afterwards, the package moved to Debian Testing, the first time in two years that docker.io has migrated to "testing".
June 29, 2018 by Mark Filion | News & Events
By this time next week, Collaborans will have arrived in Almería, Spain, to attend and speak at the 2018 edition of GUADEC, the annual GNOME conference. Come say hello!
June 27, 2018 by Ana Guerrero López | Blog
In Debian and derivative systems, there are many ways to build images. The simplest tool of choice is often debootstrap. It works by downloading the .deb files from a mirror and unpacking them into a directory which can eventually be chrooted into.
June 25, 2018 by Olivier Crête | Blog
Launched by Haivision in 2017, and freely available on GitHub via the Mozilla Public License 2.0, SRT is an innovative UDP-based protocol enabling high-quality, low-latency video streaming across unpredictable networks.
June 11, 2018 by Omar Akkila | Blog
Embedded devices are a popular deployment target for GStreamer yet they are not tested on the project's Continuous Integration (CI) system. Here's a look at work done to introduce a Raspberry Pi for automated on-board testing using Jenkins, LAVA & more.
June 05, 2018 by Mark Filion | Blog
In late January 1998, Netscape surprised everyone by releasing the source for Communicator, its web browser, making it readily available to all. The marked a turning point, and the birth of a new term, in software development: Open Source.
June 04, 2018 by Enric Balletbò i Serra | News & Events
Linus Torvalds has now released the official Linux 4.17, so it’s time for our traditional blog post summing up our contributions to the latest version of the Linux kernel, which include a number of patches to the DRM subsystem.
May 29, 2018 by Omar Akkila | Blog
At the start of 2018 in January, I joined Collabora, an open source software consultancy, as a Software Engineer Intern with the Multimedia team. Reaching the end of that internship, I would like to take the time to share my experience.
May 18, 2018 by Zeeshan Ali | Blog
Earlier this month, Olivier Crête, Nicolas Dufresne, George Kiagiadakis & I attended the GStreamer Spring Hackfest in Lund, Sweden. Hosted by Axis, it was a great opportunity for the GStreamer community to touch base and work on open bugs and pet projects.
May 09, 2018 by Elie Tournier | Blog
A few months ago, Robert Foss wrote a blog post about virtualizing GPU Access. Here's a look at some of the major improvements that have landed upstream since then, including QEMU using OpenGL ES acceleration, as well as our plans for the future.
May 01, 2018 by Olivier Crête | Blog
Generously hosted by Axis in the beautiful Lund, Sweden, the annual spring hackfest is an occasion for the community to get together to bond, but also to co-ordinate the next half year of development of the GStreamer multimedia framework.
May 05, 2021 by Frederic Danis | Blog
DKMS is a framework that is mostly used to build and install external kernel modules. It can also be used to install a specific patch to the modules of the current kernel, such as applying a specific fix to the Bluetooth USB subsystem.
April 29, 2021 by Xavier Claessens | Blog
Building GTK 4 as a Meson subproject for your own application is not only useful for Windows builds, but also for many Linux distributions that do not yet package a recent enough version of GTK 4 and/or its dependencies.
April 22, 2021 by Antonio Caggiano | Blog
Recently, we have been using Perfetto to successfully profile Apitrace traces in crosvm through VirGL renderer. We have now added perfetto instrumentation to VirGL renderer, Mesa, and Apitrace to see what happens precisely in a frame.
April 20, 2021 by Marcus Edel | Blog
As part of a project backed by INVEST-AI, a program managed by IVADO Labs, we have developed a multi-stage neural network-based solution that accurately locates and tracks the hands despite complex background noise and occlusion between hands.
April 13, 2021 by Andrzej Pietrasiewicz | Blog
Did you know you could run a permissively-licensed MTP implementation with minimal dependencies on an embedded device? Here's a step-by-step guide on how to easily run cmtp-responder on a Rock Pi 4 or any other board equipped with a UDC.
March 24, 2021 by Guillaume Desmottes | Blog
Earlier this year, the Rust compiler gained support for LLVM source-base code coverage. In this post we'll explain how to setup a CI job in a Rust project to feed source-base coverage information to GitLab.
March 18, 2021 by Xavier Claessens | Blog
Over the past few months, I've been working on a side project to improve Meson sub-project support. The best stress test is to build projects on Windows, without msys2, because it has no dependencies or tools installed (e.g. pkg-config).
March 04, 2021 by Alexandra Pereira | Blog
The most complete automated testing and continuous integration tool for the Linux kernel continues to evolve at a rapid pace. Here's a look at the latest improvements to the KernelCI dashboard, the main web interface used by the project.
March 03, 2021 by Arnaud Ferraris | Blog
In the embedded world, many modern SoCs such as the ST Microelectronics STM32MP1 now include coprocessor cores which can be used for a wide range of tasks and can offload some of the work from the main processor.
February 17, 2021 by Benjamin Gaignard | Blog
Our recent efforts on the Hantro kernel driver have resulted in the addition of H.264 decoding support and multiple performance improvements. We are now introducing High Efficiency Video Coding, also known as H.265, decoding support on NXP's i.MX8 M.
February 08, 2021 by Jakub Adam | Blog
Hwangsaeul, or H8L, a remote surveillance streaming solution, utilizes the capability of libsrt to collect statistics from open SRT sockets and by continuously analyzing the available data tries to detect potential connectivity issues.
February 01, 2021 by Gert Wollny | Blog
Complex, real-world correctness tests and performance analysis are now possible thanks to gltrim, a new tool recently added to apitrace, designed to trim replayable traces to single, user-defined frames.
December 08, 2021 by Mark Filion | News & Events
A year of online conferences that began with linux.conf.au will end on a high note next week as Collaborans present three talks at Open Source Summit Japan + Automotive Linux Summit 2021. Join us!
November 10, 2021 by Sebastian Reichel | News & Events
It might be smaller than the last few kernels, but with well above 10,000 non-merge changes, the latest Linux kernel release still packs a punch. Released on October 31, kernel 5.15 brings lots of exciting new features.
November 02, 2021 by George Kiagiadakis | News & Events
Today marks a very exciting day as Fedora 35 has now been released, and with it comes WirePlumber as the default session manager for PipeWire! Under development by Collabora since 2019, WirePlumber has now entered the linux desktop space.
September 24, 2021 by Mark Filion | News & Events
Collaborans will be actively participating in next week's activities with seven talks on topics including Rust build scripts, embedded deep learning on GStreamer, HEVC decoding on mainline Linux, PipeWire and WirePlumber, and more.
September 21, 2021 by Alyssa Rosenzweig | News & Events
This important milestone is a step forward for the open source driver, as it now certifies Panfrost for use in commercial products containing Mali G52 and paves the way for further conformance submissions on other Mali GPUs.
September 16, 2021 by Stéphane Cerveau | News & Events
GStreamer can be tricky to ship in a constrained device. Thanks to a partnership with Huawei, you can now use gst-build to generate a minimal GStreamer build, tailored to a specific application, or set of applications. Here's how.
September 07, 2021 by Nícolas F. R. A. Prado | News & Events
With an ever-increasing interest in more modern hardware support, and a more reliable kernel that is thoroughly tested, contributions by Collabora's developers continue to help make this a reality for the Linux kernel.
September 01, 2021 by Mark Filion | News & Events
September's busy conference schedule kicks off next week with the Fall edition of Linaro Virtual Connect. Join us as we look at how to master your PipeWire streams with WirePlumber, and de-mystify GFX virtualization with VirGL!
July 20, 2021 by Alyssa Rosenzweig | News & Events
After a month of reverse-engineering the Arm Mali G78, we’re excited to release documentation on the Valhall instruction set, available as a PDF, as well as a Valhall assembler and disassembler to be used as a reverse-engineering aid.
July 08, 2021 by Gabriel Krisman Bertazi | News & Events
Collabora's team working directly on the Linux kernel is growing. Collaborans continue to expand on their efforts to close the gap between hardware support on vendor trees and mainline.
June 21, 2021 by Shreeya Patel | News & Events
Earlier this month, Collabora took part in the very first KernelCI hackfest, initiated as a joint effort with the Google Chrome OS team. Here's a look at what led to our participation and what was accomplished.
Here are the online events we'll be attending in the coming weeks – join us!
14-15 December, Online
14-15 October, Online