News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

Emerging ideas at Open Source Summit North America

June 16, 2022 by Kara Bembridge  |   News & Events

Big events draw in an array of individuals to learn and connect, and the Open Source Summit North America is no exception. Jam-packed with sessions to uncover from June 21 to 24, this year's event features three talks by Collabora's very own!

Emerging ideas at Open Source Summit North America

Adding secondary command buffers to PanVk

June 15, 2022 by Manas Chaudhary  |   Blog

Getting PanVk, an open source driver for Arm Mali Midgard and Bifrost GPUs, closer to conformancy by implementing one of the core Vulkan features: support for secondary command buffers.

Adding secondary command buffers to PanVk

Bridging the synchronization gap on Linux

June 09, 2022 by Faith Ekstrand  |   Blog

After fighting with the divide between implicit and explicit synchronization with Vulkan on Linux for over seven years, we may finally have some closure. We're not to synchronization nirvana quite yet, but this is an important step along the way.

Bridging the synchronization gap on Linux

Conformant open source support for Mali-G57

June 06, 2022 by Alyssa Rosenzweig  |   News & Events

Mali-G57 features in new MediaTek Chromebooks with the MT8192 and MT8195 system-on-chips. With Mesa 22.2 and an appropriate kernel, accelerated graphics will work out of the box on Linux on these laptops.

Conformant open source support for Mali-G57

Kernel 5.18: Milestones for the road ahead

June 02, 2022 by Dmitry Osipenko  |   News & Events

Released by Linus Torvalds on May 22 after a busy two-month development cycle, Linux kernel 5.18 brings new features and lights up new hardware. Let's take a look at the contributions made by our engineering team.

Kernel 5.18: Milestones for the road ahead

Monado's hand tracking: hand-waving our way towards a first attempt

May 31, 2022 by Moses Turner  |   Blog

Optical hand tracking for XR has a bit of a reputation - getting training data, training neural nets, and deploying them in real-time, low-latency environments such as XR is every bit as hard as they say it is.

Monado's hand tracking: hand-waving our way towards a first attempt

Finding the secret ingredient at Embedded and Kernel Recipes

May 26, 2022 by Kara Bembridge  |   News & Events

After a two-year hiatus, the City of Lights is shinning brightly again to welcome the community for a full week of engaging talks at Embedded Recipes and Kernel Recipes conferences.

Finding the secret ingredient at Embedded and Kernel Recipes

Talks of the town: Software engineering edition

May 17, 2022 by Kara Bembridge  |   News & Events

Less than a day away, May 18th looks to be a very busy time. With Live Embedded Event and Embedded Vision Summit taking place almost simultaneously, Collabora will be presenting four different talks!

Talks of the town: Software engineering edition

PipeWire: Bluetooth support status update

April 29, 2022 by Frederic Danis  |   News & Events

Over the last two years, Bluetooth® audio support has steadily grown in PipeWire and has become a featureful, stable, conformant, open source Bluetooth® audio stack implementation. Here's a look at where things stand.

PipeWire: Bluetooth support status update

SocketCAN x Kubernetes

April 27, 2022 by Jakub Piotr Cłapa  |   News & Events

Looking to use hardware-backed and virtual SocketCAN interfaces inside your Kubernetes Pods? A new device plugin now allows processes inside a pod to communicate with each other using the full Linux SocketCAN API.

SocketCAN x Kubernetes

Monado accepted in GSoC 2022!

April 06, 2022 by Frédéric Plourde  |   News & Events

Monado has been accepted for the first time as a mentoring organization for the 2022 Google Summer of Code (GSoC)! Collabora will be providing three mentors to support contributors who want to work on Monado-related projects.

Monado accepted in GSoC 2022!

Visual-inertial tracking for Monado

April 05, 2022 by Mateo de Mayo  |   Blog

Monado now has initial support for 6DoF ("inside-out") tracking for devices with cameras and an IMU! Three free and open source SLAM/VIO solutions were integrated and adapted to work on XR: Kimera-VIO, ORB-SLAM3, and Basalt.

Visual-inertial tracking for Monado

Profiling virtualized GPU acceleration with Perfetto

April 22, 2021 by Antonio Caggiano  |   Blog

Recently, we have been using Perfetto to successfully profile Apitrace traces in crosvm through VirGL renderer. We have now added perfetto instrumentation to VirGL renderer, Mesa, and Apitrace to see what happens precisely in a frame.

Profiling virtualized GPU acceleration with Perfetto

Continuous 3D Hand Pose Tracking using Machine Learning & Monado

April 20, 2021 by Marcus Edel  |   Blog

As part of a project backed by INVEST-AI, a program managed by IVADO Labs, we have developed a multi-stage neural network-based solution that accurately locates and tracks the hands despite complex background noise and occlusion between hands.

Continuous 3D Hand Pose Tracking using Machine Learning & Monado

An easy to use MTP implementation for your next embedded Linux project

April 13, 2021 by Andrzej Pietrasiewicz  |   Blog

Did you know you could run a permissively-licensed MTP implementation with minimal dependencies on an embedded device? Here's a step-by-step guide on how to easily run cmtp-responder on a Rock Pi 4 or any other board equipped with a UDC.

An easy to use MTP implementation for your next embedded Linux project

Rust: integrating LLVM source-base code coverage with GitLab

March 24, 2021 by Guillaume Desmottes  |   Blog

Earlier this year, the Rust compiler gained support for LLVM source-base code coverage. In this post we'll explain how to setup a CI job in a Rust project to feed source-base coverage information to GitLab.

Rust: integrating LLVM source-base code coverage with GitLab

Build and run GTK 4 applications with Visual Studio

March 18, 2021 by Xavier Claessens  |   Blog

Over the past few months, I've been working on a side project to improve Meson sub-project support. The best stress test is to build projects on Windows, without msys2, because it has no dependencies or tools installed (e.g. pkg-config).

Build and run GTK 4 applications with Visual Studio

New features, changes & improvements to KernelCI's UI

March 04, 2021 by Alexandra Pereira  |   Blog

The most complete automated testing and continuous integration tool for the Linux kernel continues to evolve at a rapid pace. Here's a look at the latest improvements to the KernelCI dashboard, the main web interface used by the project.

New features, changes & improvements to KernelCI's UI

Asymmetric Multi Processing with Linux & Zephyr on the STM32MP1

March 03, 2021 by Arnaud Ferraris  |   Blog

In the embedded world, many modern SoCs such as the ST Microelectronics STM32MP1 now include coprocessor cores which can be used for a wide range of tasks and can offload some of the work from the main processor.

Asymmetric Multi Processing with Linux & Zephyr on the STM32MP1

Adding HEVC/H.265 support for NXP's i.MX 8M

February 17, 2021 by Benjamin Gaignard  |   Blog

Our recent efforts on the Hantro kernel driver have resulted in the addition of H.264 decoding support and multiple performance improvements. We are now introducing High Efficiency Video Coding, also known as H.265, decoding support on NXP's i.MX8 M.

Adding HEVC/H.265 support for NXP's i.MX 8M

Network adaptive streaming with Hwangsaeul

February 08, 2021 by Jakub Adam  |   Blog

Hwangsaeul, or H8L, a remote surveillance streaming solution, utilizes the capability of libsrt to collect statistics from open SRT sockets and by continuously analyzing the available data tries to detect potential connectivity issues.

Network adaptive streaming with Hwangsaeul

Trimming apitrace workload captures for better Mesa testing

February 01, 2021 by Gert Wollny  |   Blog

Complex, real-world correctness tests and performance analysis are now possible thanks to gltrim, a new tool recently added to apitrace, designed to trim replayable traces to single, user-defined frames.

Trimming apitrace workload captures for better Mesa testing

GStreamer on Windows: adding WebRTC support to a gst-build install

January 28, 2021 by Aaron Boxer  |   Blog

Earlier this week, WebRTC became an official W3C and IETF standard. GStreamer has a powerful and rapidly maturing WebRTC implementation. So, the obvious question is: how do we build this on Windows?

GStreamer on Windows: adding WebRTC support to a gst-build install

Implementing a performance boosting algorithm in Coccinelle

January 21, 2021 by Jaskaran Singh  |   Blog

Last year, from June to September, I worked on the kernel development tool Coccinelle under Collabora. I implemented a performance boosting algorithm for one of Coccinelle's use cases. Here's a look at this work.

Implementing a performance boosting algorithm in Coccinelle

5 talks for FOSDEM 2025: BlueZ, GStreamer, Open Source AI models & more!

January 07, 2025 by Kara Bembridge  |   News & Events

A testament to its long standing community interest and devote volunteers, FOSDEM will be celebrating its 25th anniversary this year. Join us as we take the stage to discuss BlueZ, GStreamer, Open Source AI models, & more!

5 talks for FOSDEM 2025: BlueZ, GStreamer, Open Source AI models & more!

Upstream support for Rockchip's RK3588: Progress and future plans

December 20, 2024 by Sebastian Reichel  |   News & Events

The Rockchip RK3588 upstream support has progressed a lot over the last few years. As 2024 comes to a close, it is a great time to have a look at the recent changes, work in progress, and the current state in general.

Upstream support for Rockchip's RK3588: Progress and future plans

Academically inclining at NeurIPS 2024

December 09, 2024 by Kara Bembridge  |   News & Events

Collabora will be at NeurIPs this week to dive into the latest academic findings in machine learning and research advancements that are changing the industry.

Academically inclining at NeurIPS 2024

Apertis v2024: the new Bookworm-based release for industrial embedded devices

December 05, 2024 by Dylan Aïssi  |   News & Events

Now based on Debian Bookworm, Apertis is a collaborative OS platform that includes an operating system, but also tools and cloud services to optimize development and increase reliability.

Apertis v2024: the new Bookworm-based release for industrial embedded devices

Initial upstream support for the Rockchip RK3576

December 03, 2024 by Sebastian Reichel  |   News & Events

Initial support for Rockchip's RK3576, a new SoC introduced earlier this year, has landed in Linux kernel 6.12. With the main target being industrial applications, it is less of a powerhouse than the RK3588, but it still reuses many components.

Initial upstream support for the Rockchip RK3576

NVK now supports Vulkan 1.4

December 02, 2024 by Faith Ekstrand  |   News & Events

Today, Khronos announced the release of the Vulkan 1.4 specification, and NVK is one of the day-zero conformant Vulkan 1.4 implementations! Vulkan 1.4 support in NVK has been merged into Mesa and will be part of the Mesa 25.0 release in early 2025.

NVK now supports Vulkan 1.4

Weston 14.0: DRM-backend, color management, and output mirroring

November 27, 2024 by Marius Vlad  |   News & Events

Recently, both Weston 14.0, and 14.0.1 (bug fix) were released. Here's at look at some of the highlights and changes for this latest release of Wayland's reference compositor.

Weston 14.0: DRM-backend, color management, and output mirroring

Kernel 6.12: Small but mighty

November 26, 2024 by Dmitry Osipenko  |   News & Events

Linux kernel 6.12 is here with real-time preemption support and an extensible scheduler class. Take a look at the contributions our kernel team made for this release.

Kernel 6.12: Small but mighty

Integrating kernels and minds at the Linux Foundation Member Summit

November 15, 2024 by Kara Bembridge  |   News & Events

The Linux Foundation Member Summit is an opportune time to gather on the state of open source. Our talk will address the concerns and challenges of maintaining a stable kernel.

Integrating kernels and minds at the Linux Foundation Member Summit

Hello, MediaTek Genio!

November 14, 2024 by Mark Filion  |   News & Events

Today, we are delighted to announce a growing collaboration with MediaTek which will enable Collabora to introduce, improve, and maintain MediaTek's IoT Edge AI Genio platforms upstream.

Hello, MediaTek Genio!

electronica 2024 with Renesas

November 06, 2024 by Mark Filion  |   News & Events

Join us at electronica 2024! In partnership with Renesas, Collabora will be showcasing GStreamer open source AI video analytics on the Renesas RZ/G2L, leveraging the MYIR RemiPi.

electronica 2024 with Renesas

X.Org Developer's Conference 2024

October 07, 2024 by Kara Bembridge  |   News & Events

XDC kicks off October 9 and we have 7 talks to share with the community! Join us as we share the latest news on open source graphics.

X.Org Developer's Conference 2024

Search the newsroom

Upcoming Events

Here are the events we'll be attending in the coming weeks – come say hello!

FOSDEM

February 1-2, Brussels, Belgium

 

Featured Video

Open Since 2005 logo

Our website only uses a strictly necessary session cookie provided by our CMS system. To find out more please follow this link.

Collabora Limited © 2005-2025. All rights reserved. Privacy Notice. Sitemap.