News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

A growth year for upstream kernel contributions

December 22, 2021 by Gustavo Padovan  |   News & Events

With over 350 patches authored and nearly 200 reviewed and tested in multiple subsystems, 2021 was a great year for Linux kernel development at Collabora. Here is a look at some of our achievements during the year.

A growth year for upstream kernel contributions

Meet wxrd, a standalone Wayland compositor for xrdesktop

December 20, 2021 by Christoph Haag  |   News & Events

The Linux desktop in VR goes headless! Introducing wxrd, a standalone Wayland compositor for xrdesktop based on wlroots, with minimal dependencies.

Meet wxrd, a standalone Wayland compositor for xrdesktop

Open Source in Japan, virtually

December 08, 2021 by Mark Filion  |   News & Events

A year of online conferences that began with linux.conf.au will end on a high note next week as Collaborans present three talks at Open Source Summit Japan + Automotive Linux Summit 2021. Join us!

Open Source in Japan, virtually

Venus on QEMU: Enabling the new virtual Vulkan driver

November 26, 2021 by Antonio Caggiano  |   Blog

A step-by-step guide on how to enable 3D acceleration of Vulkan applications in QEMU through the new Venus experimental Vulkan driver for VirtIO-GPU with a local development environment.

Venus on QEMU: Enabling the new virtual Vulkan driver

Kernel 5.15: A small but mighty Halloween release

November 10, 2021 by Sebastian Reichel  |   News & Events

It might be smaller than the last few kernels, but with well above 10,000 non-merge changes, the latest Linux kernel release still packs a punch. Released on October 31, kernel 5.15 brings lots of exciting new features.

Kernel 5.15: A small but mighty Halloween release

WirePlumber in Fedora 35

November 02, 2021 by George Kiagiadakis  |   News & Events

Today marks a very exciting day as Fedora 35 has now been released, and with it comes WirePlumber as the default session manager for PipeWire! Under development by Collabora since 2019, WirePlumber has now entered the linux desktop space.

WirePlumber in Fedora 35

Run your own CI pipeline with GStreamer's new monorepo

October 26, 2021 by Xavier Claessens  |   Blog

Maintaining a non-trivial set of GStreamer patches can be tricky. Thanks to the recent move to a single, unified git repo, you can now easily run a GStreamer continuous integration pipeline on your own GitLab instance. Here's how.

Run your own CI pipeline with GStreamer's new monorepo

Improving test coverage for cameras in KernelCI

October 08, 2021 by Nícolas F. R. A. Prado  |   Blog

Earlier this year, I joined Collabora as an intern to work on improving testing in libcamera and automating it through KernelCI. Having recently completed the internship, here's a look back at this experience and what was accomplished.

Improving test coverage for cameras in KernelCI

A tale of two toolchains and glibc

September 30, 2021 by Adrian Ratiu  |   Blog

With the LLVM toolchain seeing increasing development and adoption alongside the older, more established GNU toolchain, projects needing to support both, in particular the GNU C library (glibc), are facing challenges and questions.

A tale of two toolchains and glibc

Open Source Summit + Embedded Linux Conference 2021

September 24, 2021 by Mark Filion  |   News & Events

Collaborans will be actively participating in next week's activities with seven talks on topics including Rust build scripts, embedded deep learning on GStreamer, HEVC decoding on mainline Linux, PipeWire and WirePlumber, and more.

Open Source Summit + Embedded Linux Conference 2021

Panfrost achieves OpenGL ES 3.1 conformance on Mali-G52

September 21, 2021 by Alyssa Rosenzweig  |   News & Events

This important milestone is a step forward for the open source driver, as it now certifies Panfrost for use in commercial products containing Mali G52 and paves the way for further conformance submissions on other Mali GPUs.

Panfrost achieves OpenGL ES 3.1 conformance on Mali-G52

Generate a minimal GStreamer build, tailored to your needs

September 16, 2021 by Stéphane Cerveau  |   News & Events

GStreamer can be tricky to ship in a constrained device. Thanks to a partnership with Huawei, you can now use gst-build to generate a minimal GStreamer build, tailored to a specific application, or set of applications. Here's how.

Generate a minimal GStreamer build, tailored to your needs

More to it than beer

January 10, 2018 by Guy Lunardi  |   Blog

Widely recognized as the best conference of its kind in Europe, the 2018 edition of FOSDEM promises to be no different, with a jam-packed schedule of over 600 lectures, lightning talks, developer rooms, and more.

More to it than beer

CEF on Wayland

December 22, 2017 by Gustavo Noronha  |   Blog

We recently assisted a customer who wanted to upgrade their system from X11 to Wayland. The problem: they use CEF as a runtime for web applications and CEF was not Wayland-ready.

CEF on Wayland

Why Linux HDCP isn't the end of the world

December 11, 2017 by Daniel Stone  |   Blog

Recently, Sean Paul from Google's ChromeOS team, submitted a patch series to enable HDCP - or High-bandwidth Digital Content Protection - support for the Intel display driver.

Why Linux HDCP isn't the end of the world

Quick hack: Building ChromiumOS for QEMU

December 01, 2017 by Robert Foss  |   Blog

Getting ChromiumOS building is reasonably easy, but running it under QEMU requires some work. Here's a guide to help you build all of the software needed to do so.

Quick hack: Building ChromiumOS for QEMU

Running Chromium with Ozone-GBM on a GNU/Linux desktop

November 27, 2017 by Alexandros Frantzis  |   Blog

Ozone is Chromium’s next-gen platform abstraction layer for graphics and input. When developing either Ozone itself or an application that uses Ozone, it is often beneficial to be able to run the code on the development machine, which is usually a typical…

Running Chromium with Ozone-GBM on a GNU/Linux desktop

ipcpipeline: Splitting a GStreamer pipeline into multiple processes

November 17, 2017 by George Kiagiadakis  |   Blog

Earlier this year I worked on a certain GStreamer plugin that is called “ipcpipeline”. This plugin provides elements that make it possible to interconnect GStreamer pipelines that run in different processes. In this blog post I am going to explain how…

ipcpipeline: Splitting a GStreamer pipeline into multiple processes

Quick hack: Experiments with crosvm

November 09, 2017 by Tomeu Vizoso  |   Blog

Running crosvm outside Chromium OS is quite easy, with the only complication being that minijail isn't widely packaged in distros. In these instructions, we hack around the issue with linker environment variables so we don't have to install it properly.

Quick hack: Experiments with crosvm

Tracing memory leaks in the NFC Digital Protocol stack

November 06, 2017 by Thierry Escande  |   Blog

Kmemleak allows you to track possible memory leaks inside the Linux kernel. Basically, it tracks dynamically allocated memory blocks in the kernel and reports those without any reference left and that are therefore impossible to free.

Tracing memory leaks in the NFC Digital Protocol stack

Who knew we still had low-hanging fruit?

October 17, 2017 by Gustavo Noronha  |   Blog

Earlier this month I had the pleasure of attending the Web Engines Hackfest, hosted by Igalia at their offices in A Coruña, and also sponsored by my employer, Collabora, Google and Mozilla. It has grown a lot and we had many new people this year.

Who knew we still had low-hanging fruit?

Performance analysis in Linux (continued)

October 06, 2017 by Gabriel Krisman Bertazi  |   Blog

In this post, I will show one more example of how easy it is to disrupt performance of a modern CPU, and also run a quick discussion on why performance matters - as well as present a few cases where it shouldn't matter.

Performance analysis in Linux (continued)

XDC 2017 - Links to recorded presentations (videos)

September 23, 2017 by Guy Lunardi  |   Blog

Many thanks to Google for recording all the XDC2017 talks. To make them easier to watch, here are direct links to each talk recorded at XDC2017.

XDC 2017 - Links to recorded presentations (videos)

DebConf 17: Flatpak and Debian

August 17, 2017 by Simon McVittie  |   Blog

Last week, I attended DebConf 17 in Montréal, returning to DebConf for the first time in 10 years (last time was DebConf 7 in Edinburgh). It was great to put names to faces and meet more of my co-developers in person!

DebConf 17: Flatpak and Debian

Kernel 5.7: Forging ahead, despite COVID-19

June 04, 2020 by Andrzej Pietrasiewicz  |   News & Events

This latest release is the first to contain development work accomplished amid the lockdown measures. Despite these significant changes, Collaborans have also been steadfast in their contributions, with multiple projects progressing.

Kernel 5.7: Forging ahead, despite COVID-19

Google Summer of Code 2020

June 01, 2020 by Mark Filion  |   News & Events

Coding hss begun for this year's Google Summer of Code (GSoC) projects, announced earlier last month. The 2020 edition selected 1,199 students from 66 countries, to work with 199 mentoring organizations over the course of the summer.

Google Summer of Code 2020

Monado OpenXR runtime development gaining momentum: version 0.2, multi-layer support & more!

May 29, 2020 by Jakob Bornecrantz  |   News & Events

With the excellent (online) edition of Augmented World Expo 2020 in full swing this week, what better time to announce version 0.2 of the Monado OpenXR runtime for Linux. It's been a very busy three months since the last Monado developer update!

Monado OpenXR runtime development gaining momentum: version 0.2, multi-layer support & more!

Laval Virtual: OpenXR master class in VR!

May 18, 2020 by Mark Filion  |   News & Events

A few weeks ago, Ryan Pavlik presented "Unifying Reality: Building Experiences with OpenXR", a master class on OpenXR, the open standard API for building VR and AR experiences that work across devices, now and into the future.

Laval Virtual: OpenXR master class in VR!

xrdesktop 0.14 with OpenXR support is here!

May 08, 2020 by Lubosz Sarnecki  |   News & Events

Sponsored by Valve, this latest release of the Open Source project which enables interaction with traditional desktop environments, such as GNOME and KDE, in VR, brings the largest amount of changes yet, with many new features and architectural improvements.

xrdesktop 0.14 with OpenXR support is here!

Service process and out of process compositing in Monado

April 30, 2020 by Lubosz Sarnecki  |   News & Events

A new monado-service binary and out of process compositor has landed in Monado, the fully Open Source OpenXR runtime for Linux! Here's a demo of the compositor's new abilities running with the new Blender OpenXR VR Session.

Service process and out of process compositing in Monado

Say hello to the newest Collaborans!

April 21, 2020 by Erica Ryoo  |   News & Events

In these times of disruption and uncertainty, how about some positive news for a change? Let's take a moment to celebrate the newest members of our engineering and administration teams: Mylène, Christopher, Melissa, Ricardo and Leandro!

Say hello to the newest Collaborans!

Projects and progress in Linux kernel 5.6

March 31, 2020 by Helen Koike  |   News & Events

Despite the challenges presented by COVID-19, Linux kernel development continues. Here's a look at the various projects Collaborans have been involved in, and the progress made in kernel 5.6, which was released over the weekend.

Projects and progress in Linux kernel 5.6

Linaro Tech Days: Wayland, Weston & Open Source GPU drivers

March 30, 2020 by Mark Filion  |   News & Events

This week, Daniel Stone and Tomeu Vizoso will be taking part in Linaro Tech Days, a series of technical sessions presented live online via Zoom webinar and streamed on YouTube. These sessions are free to attend and open to the public!

Linaro Tech Days: Wayland, Weston & Open Source GPU drivers

Introducing OpenCL and OpenGL on DirectX

March 24, 2020 by Erik Faye-Lund  |   News & Events

Today, Collabora is excited to announce a partnership with Microsoft to build OpenCL and OpenGL mapping layers on DirectX, in order to bring OpenCL 1.2 and OpenGL 3.3 support to all Windows and DirectX 12 enabled devices.

Introducing OpenCL and OpenGL on DirectX

Monado OpenXR runtime developer update

February 25, 2020 by Jakob Bornecrantz  |   News & Events

Ever since announcing the project at GDC 2019, we have been working on improving the full open source XR stack to a usable state. Today, we are very happy to tag version 0.1 of the Monado OpenXR runtime for Linux!

Monado OpenXR runtime developer update

Low latency streaming of security video feeds with SRT and GStreamer

February 12, 2020 by Jakub Adam  |   News & Events

With the advent of 5G networks, it's now possible to stream high quality video in real-time with a very low latency that wasn't possible with the past generations of mobile networks.

Low latency streaming of security video feeds with SRT and GStreamer

Search the newsroom

Upcoming Events

Here are the events we'll be attending in the coming weeks – come say hello!

IOT Solutions World Congress

May 21-22, Barcelona, Spain

 

Augmented World Expo US

June 18-20, Long Beach, CA, USA

 

Featured Video

Open Since 2005 logo

We use cookies on this website to ensure that you get the best experience. By continuing to use this website you are consenting to the use of these cookies. To find out more please follow this link.

Collabora Ltd © 2005-2024. All rights reserved. Privacy Notice. Sitemap.