May 27, 2020 by Adrian Ratiu | Blog
Device drivers can support more revisions and SoC platforms by abstracting away specific hardware interface layouts. Let's examine a specific instance of this process, namely the effort to make the MIPI DSI host controller driver more generic.
May 18, 2020 by Mark Filion | News & Events
A few weeks ago, Ryan Pavlik presented "Unifying Reality: Building Experiences with OpenXR", a master class on OpenXR, the open standard API for building VR and AR experiences that work across devices, now and into the future.
May 15, 2020 by Stéphane Cerveau | Blog
gst-build is one of the main build systems used by the community to develop the GStreamer platform. In my last blog post, I presented gst-build and explained how to get started with it. Now, let's get straight to the point regarding cross-compilation.
May 12, 2020 by Andre Almeida | Blog
In part 2 of this series on syzkaller, we looked at how to install the tool and use it to improve our code base. Now, how does syzkaller report a bug it finds in the execution path of a system call? Let's add a new syscall description and see how it goes.
May 08, 2020 by Lubosz Sarnecki | News & Events
Sponsored by Valve, this latest release of the Open Source project which enables interaction with traditional desktop environments, such as GNOME and KDE, in VR, brings the largest amount of changes yet, with many new features and architectural improvements.
May 07, 2020 by George Kiagiadakis | Blog
An in-depth look at WirePlumber, the modular and extensible session manager for PipeWire that brings advanced device management, policy control and security enforcement capabilities.
April 30, 2020 by Lubosz Sarnecki | News & Events
A new monado-service binary and out of process compositor has landed in Monado, the fully Open Source OpenXR runtime for Linux! Here's a demo of the compositor's new abilities running with the new Blender OpenXR VR Session.
April 28, 2020 by Guillaume Desmottes | Blog
With Rust gaining traction among the GStreamer community as an alternative to C to write applications and plugins, we began wondering, could the size of such Rust plugins be a problem for embedded systems?
April 23, 2020 by Alyssa Rosenzweig | Blog
The Panfrost project building a free, Open Source graphics driver for modern Mali GPUs has reached a new milestone: the first 3D render, including basic texture support, on a Bifrost chip (Mali G31)!
April 21, 2020 by Erica Ryoo | News & Events
In these times of disruption and uncertainty, how about some positive news for a change? Let's take a moment to celebrate the newest members of our engineering and administration teams: Mylène, Christopher, Melissa, Ricardo and Leandro!
April 20, 2020 by Mark Filion | Blog
Google Open Source has announced their 2020 first quarter Google Open Source Peer Bonus winners, and Alyssa Rosenzweig, Software Engineer at Collabora, is among the recipients!
April 17, 2020 by Andre Almeida | Blog
In my previous blog post, we discussed the importance of testing, what is fuzzing, and how the syzkaller fuzzes the kernel in order to find bugs. Now, let’s install the tool and starting using it to improve our code base.
December 02, 2022 by Deborah Brouwer | Blog
Earlier this year, I joined Collabora for a six-month internship to learn how V4L2 (Video4Linux2) supports stateless video hardware decoding, and build a utility that traced and replayed stateless decoding from a userspace perspective.
October 27, 2022 by Ashok Sidipotu | Blog
With the upcoming 0.5 release, WirePlumber's configuration system will be moving to a JSON syntax to define settings, bringing a more unified configuration approach across the PipeWire ecosystem.
October 19, 2022 by Igor Torrente | Blog
Venus is a virtual Vulkan driver based on the Virtio-GPU protocol, which defines the serialization of Vulkan commands between guest and host. Here's a closer look at Venus, its components, and their relations in the context of extensions.
October 11, 2022 by Vineet Suryan | Blog
Taking one step towards democratizing the daunting task of dataset generation by making image synthesis and automatic ground truth data generation maintainable, cheaper, and more repeatable.
September 14, 2022 by Marcus Edel | Blog
Using open source software, Collabora has developed an efficient compression pipeline that enables a face video broadcasting system that achieves the same visual quality as the H.264 standard while only using one-tenth of the bandwidth.
September 07, 2022 by Jason Ekstrand | Blog
Introducing new common code for Mesa Vulkan drivers to support a new Vulkan extension, making it easier for app and game authors to manage Vulkan state - and easier for our drivers too.
September 02, 2022 by Frederic Danis | Blog
Using PipeWire, WirePlumber and a Raspberry Pi, you can create an audio bridge between a Bluetooth® device and an analog speaker system, breathing new life into your old speakers.
July 07, 2022 by Gert Wollny | Blog
Adventures in NIR-land: the past, the present, and what's lies ahead for the native NIR back-end for Mesa's R600 driver.
June 15, 2022 by Manas Chaudhary | Blog
Getting PanVk, an open source driver for Arm Mali Midgard and Bifrost GPUs, closer to conformancy by implementing one of the core Vulkan features: support for secondary command buffers.
June 09, 2022 by Jason Ekstrand | Blog
After fighting with the divide between implicit and explicit synchronization with Vulkan on Linux for over seven years, we may finally have some closure. We're not to synchronization nirvana quite yet, but this is an important step along the way.
May 31, 2022 by Moses Turner | Blog
Optical hand tracking for XR has a bit of a reputation - getting training data, training neural nets, and deploying them in real-time, low-latency environments such as XR is every bit as hard as they say it is.
November 10, 2021 by Sebastian Reichel | News & Events
It might be smaller than the last few kernels, but with well above 10,000 non-merge changes, the latest Linux kernel release still packs a punch. Released on October 31, kernel 5.15 brings lots of exciting new features.
November 02, 2021 by George Kiagiadakis | News & Events
Today marks a very exciting day as Fedora 35 has now been released, and with it comes WirePlumber as the default session manager for PipeWire! Under development by Collabora since 2019, WirePlumber has now entered the linux desktop space.
September 24, 2021 by Mark Filion | News & Events
Collaborans will be actively participating in next week's activities with seven talks on topics including Rust build scripts, embedded deep learning on GStreamer, HEVC decoding on mainline Linux, PipeWire and WirePlumber, and more.
September 21, 2021 by Alyssa Rosenzweig | News & Events
This important milestone is a step forward for the open source driver, as it now certifies Panfrost for use in commercial products containing Mali G52 and paves the way for further conformance submissions on other Mali GPUs.
September 16, 2021 by Stéphane Cerveau | News & Events
GStreamer can be tricky to ship in a constrained device. Thanks to a partnership with Huawei, you can now use gst-build to generate a minimal GStreamer build, tailored to a specific application, or set of applications. Here's how.
September 07, 2021 by Nícolas F. R. A. Prado | News & Events
With an ever-increasing interest in more modern hardware support, and a more reliable kernel that is thoroughly tested, contributions by Collabora's developers continue to help make this a reality for the Linux kernel.
September 01, 2021 by Mark Filion | News & Events
September's busy conference schedule kicks off next week with the Fall edition of Linaro Virtual Connect. Join us as we look at how to master your PipeWire streams with WirePlumber, and de-mystify GFX virtualization with VirGL!
July 20, 2021 by Alyssa Rosenzweig | News & Events
After a month of reverse-engineering the Arm Mali G78, we’re excited to release documentation on the Valhall instruction set, available as a PDF, as well as a Valhall assembler and disassembler to be used as a reverse-engineering aid.
July 08, 2021 by Gabriel Krisman Bertazi | News & Events
Collabora's team working directly on the Linux kernel is growing. Collaborans continue to expand on their efforts to close the gap between hardware support on vendor trees and mainline.
June 21, 2021 by Shreeya Patel | News & Events
Earlier this month, Collabora took part in the very first KernelCI hackfest, initiated as a joint effort with the Google Chrome OS team. Here's a look at what led to our participation and what was accomplished.
June 21, 2021 by Erica Ryoo | News & Events
Despite the many obstacles brought on by the pandemic, Collabora has continued to grow its teams for the road ahead. Join us in welcoming Kiril, Benjamin, Daniel, Shreeya, Ariel, Nicolas and James!
June 07, 2021 by Alexandros Frantzis | News & Events
We first announced our work on the driver last December, and posted an update earlier this year. We are now happy to announce a second update for this driver, adding several major features which increase its scope and utility.
Here are the events we'll be attending in the coming weeks – come say hello!
November 7-9, Prague, Czech Republic
November 15-18, Munich, Germany
November 19-20, Toulouse, France
November 29 - December 1, New Orleans, USA