News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

European R-Car Consortium Forum 2019

March 13, 2019 by Mark Filion  |   News & Events

Tomorrow, March 14, Collabora will be in Düsseldorf, Germany, to take part and exhibit at the second edition of the Renesas European R-Car Consortium Forum!

European R-Car Consortium Forum 2019

An overview of the Panfrost driver

March 13, 2019 by Robert Foss  |   Blog

During the past few months significant progress has been made on the Open Source Arm Mali GPU driver front, culminating in the Panfrost driver targeting Mali T and G-series of GPUs being available now.

An overview of the Panfrost driver

Quick hack: Raspberry Pi meets Linux kernel mainline

March 12, 2019 by Helen Koike  |   Blog

With just a few simple steps, you can compile and boot a Raspberry Pi using the Linux kernel mainline source code. Here's how.

Quick hack: Raspberry Pi meets Linux kernel mainline

Linux Kernel 5.0

March 06, 2019 by Gaël Portay  |   News & Events

The first major release of Linux for the year 2019 was made available earlier this week, and with it came a new version number: 5.0. Here's a look at contributions made by Collaborans!

Linux Kernel 5.0

News from the Debian Cloud Team

March 05, 2019 by Lucas Kanashiro  |   Blog

Since the last Debian release, a number of changes have been made in the Debian Cloud Team, both on the technical & organisational level within the community. Here's a look at what's in store for Buster!

News from the Debian Cloud Team

Automotive Linux in Tokyo

March 04, 2019 by Mark Filion  |   News & Events

Collaborans are in Tokyo this week to take part in the AGL All Member Meeting. They'll be discussing the future of IVI Window Management, and also look at the latest upstream work around the PipeWire framework and how it can benefit the automotive industry.

Automotive Linux in Tokyo

Panfrost update: A new kernel driver

March 04, 2019 by Tomeu Vizoso  |   Blog

Following two months of work to develop a new kernel driver for Midgard and Bifrost GPUs, the kernel side of Panfrost is now in a form close to be acceptable in the mainline Linux kernel.

Panfrost update: A new kernel driver

Embedded World 2019

February 20, 2019 by Mark Filion  |   News & Events

Collabora is headed to Nuremberg, Germany to take part in this year's edition of Embedded World, the leading international fair for embedded systems! Come say hello, booth 4-280!

Embedded World 2019

Modern USB gadget on Linux & how to integrate it with systemd (Part 1)

February 18, 2019 by Andrzej Pietrasiewicz  |   Blog

A look at how to implement USB gadget devices on Linux machines which have the necessary UDC hardware, automate the manual configfs process via declarative gadget "schemes", and use systemd for gadget composition at boot time.

Modern USB gadget on Linux & how to integrate it with systemd (Part 1)

FOSDEM 2019 - Recorded presentations (videos)

February 15, 2019 by Mark Filion  |   Blog

From the latest on Open Source projects Zink (OpenGL on Vulkan) and VirGL (virtual 3D GPU for QEMU), to a state of the union on GStreamer embedded, and a look at how the KernelCI project is getting a second breath, Collaborans presented in five devrooms.

FOSDEM 2019 - Recorded presentations (videos)

FOSDEM 2019

January 23, 2019 by Mark Filion  |   News & Events

In just over a week's time, Collabora will be heading to Brussels to take part in the 2019 edition of FOSDEM! Come say hello, or catch one of the 8 talks (in 5 different devrooms) given by Collaborans!

FOSDEM 2019

Linux Kernel 4.20

January 07, 2019 by Fabien Lahoudere  |   News & Events

A few weeks ago, in the final days leading up to Christmas, Linus Torvalds released Linux Kernel 4.20. Collaborans were once again active during this development cycle, contributing 22 patches, 112 reviews & 55 sign-offs. Here's a look at their contributions.

Linux Kernel 4.20

Getting started with GStreamer's gst-build

March 19, 2020 by Stéphane Cerveau  |   Blog

GStreamer relies on multiple repositories such as base and good to build its ecosystem, and now owns more than 30 projects in Gitlab. So, a unified tool/build system has always been necessary to build a specified version.

Getting started with GStreamer's gst-build

Why remote working can be good for people, business and environment

March 10, 2020 by Olivier Potin  |   Blog

Here at Collabora, we trust our people to work remotely, we give them full responsibility for their output, and we believe it helps creating an even stronger internal culture and comes with some other positives.

Why remote working can be good for people, business and environment

PipeWire, the media service transforming the Linux multimedia landscape

March 05, 2020 by Julian Bouzas  |   Blog

PipeWire 0.3 was released a few days ago, marking a big step forward in the effort of making this emerging media service the core layer of all multimedia on Linux.

PipeWire, the media service transforming the Linux multimedia landscape

Experimental Panfrost GLES 3.0 support has landed in Mesa

February 27, 2020 by Alyssa Rosenzweig  |   Blog

Panfrost's ES 3.0 support has landed in upstream Mesa and works with a mainline Linux kernel. The support is still early, but if you're feeling adventurous, feel free to give it a try on your favourite ES 3.0 applications and games.

Experimental Panfrost GLES 3.0 support has landed in Mesa

Using gcc sanitisers to get a nasty bug fixed

February 18, 2020 by Andrej Shadura  |   Blog

When a bug surprises you when doing Apertis packaging of a typical vendor code signing tool, it's time to debug it using the compiler's built-in tools.

Using gcc sanitisers to get a nasty bug fixed

FOSDEM 2020 - Recorded presentations (videos)

February 05, 2020 by Mark Filion  |   Blog

From KernelCI's new home, the latest on Zink (OpenGL on Vulkan), OpenXR & Monado, PipeWire in the automotive industry, JPEG2000, and GStreamer on the Magic Leap One, Collaborans gave talks in 6 different devrooms, as well on the main track.

FOSDEM 2020 - Recorded presentations (videos)

Opening up Mali T720

December 20, 2019 by Alyssa Rosenzweig  |   Blog

If you have a device with a Mali T720 or T820 GPU, you’re in luck – your device is now supported in upstream Mesa at feature parity with other GPUs. Get out your Allwinner H6 or Amlogic S912 board, grab the latest Mesa, and enjoy a match of SuperTuxKart!

Opening up Mali T720

New graphing tool for PipeWire debugging

December 09, 2019 by Julian Bouzas  |   Blog

PipeWire, the new and emerging open source framework that aims to greatly improve the exchange and management of audio and video streams inside a Linux system, has seen a number of improvements and bug fixes over the past year.

New graphing tool for PipeWire debugging

Building GStreamer on Windows

November 26, 2019 by Aaron Boxer  |   Blog

With the advent of meson and gst-build, it is now possible to set up a GStreamer Windows development environment that rivals the finest Linux has to offer, with full support for Visual Studio debugging into the library.

Building GStreamer on Windows

Zink: Fall Update

October 24, 2019 by Erik Faye-Lund  |   Blog

I recently went to XDC 2019, where I gave yet another talk about Zink. I kinda forgot to write a blog-post about it, so here’s me trying to make up for it… or something like that. I’ll also go into some more recent developments as well.

Zink: Fall Update

Adding stateless support to vicodec

October 09, 2019 by Dafna Hirschfeld  |   Blog

Prior to joining Collabora, I took part in Round 17 of the Outreachy internships, to work on the virtual drivers in the media subsystem of the Linux kernel, or more specifically, on the vicodec driver.

Adding stateless support to vicodec

Why HDCP support in Weston is a good thing

October 03, 2019 by Pekka Paalanen  |   Blog

What HDCP is, and why supporting HDCP in Weston is justified in both an economical and technical context.

Why HDCP support in Weston is a good thing

Upcoming events: GUADEC & SIGGRAPH

July 27, 2017 by Mark Filion  |   News and Events

Over the next few days, Collaborans will be getting back on the road and attending two events, one in Manchester and one in Los Angeles. We're also very pleased to be sponsoring one of these events!

Upcoming events: GUADEC & SIGGRAPH

Collabora & Linux Kernel 4.12

July 04, 2017 by Martyn Welch  |   News & Events

Linux Kernel 4.12 is out, with 12 Collabora developers having contributed, a new record number of developers contributing to a single kernel release for Collabora!

Collabora & Linux Kernel 4.12

Growing our Core, Graphics & Web teams

June 27, 2017 by Mark Filion  |   News & Events

Our worldwide team of Open Source engineers and developers continues to grow with new additions in Core, Graphics & Web! Welcome Denis Pynkin, Alexandros Frantzis and Santosh Mahto!

Growing our Core, Graphics & Web teams

Outreachy 2017

June 02, 2017 by Mark Filion  |   News & Events

Collabora is proud to once again be sponsoring the latest round (Round 14) of Outreachy internships, which began earlier this week! More specifically, Collabora has chosen to sponsor the Linux kernel projects for the May-August semester.

Outreachy 2017

Three days, two exhibits, three talks

May 30, 2017 by Mark Filion  |   News & Events

Over the next few days, Collabora is very excited to be taking part in three events where we'll be exhibiting as well as giving talks: Augmented World Expo, Automotive Linux Summit and Open Source Summit Japan.

Three days, two exhibits, three talks

VR World, GStreamer, OSS, Vulkanised!

May 16, 2017 by Mark Filion  |   News & Events

On the road again! Collaborans are heading to London, A Coruña & Buenos Aires to attend a VR event, a hackfest, a conference on Open Source systems, and a day of technical sessions on Vulkan! See you there?

VR World, GStreamer, OSS, Vulkanised!

Collabora at GENIVI AMM

May 08, 2017 by Mark Filion  |   News & Events

From May 9 to 11, Collabora will be attending the GENIVI All Member Meeting & Open Community Days: Advancing Connected Vehicles in a Connected World, in Birmingham, UK!

Collabora at GENIVI AMM

Collabora & Linux Kernel 4.11

May 01, 2017 by Helen Fornazier  |   News & Events

Linux Kernel 4.11 was released yesterday, and 9 different Collabora developers contributed a total of 44 patches, while also reviewing 22 other patches.

Collabora & Linux Kernel 4.11

Upcoming events: VR, NAB & Khronos

April 18, 2017 by Mark Filion  |   News and Events

Collaborans are once again hitting the road and will be attending three separate events over the next new two weeks, in London, Las Vegas and Amsterdam

Upcoming events: VR, NAB & Khronos

Release: libnice 0.1.14

April 03, 2017 by Mark Filion  |   News and Events

Today, Olivier Crête, libnice maintainer and Collabora Multimedia Lead, announced the availability of libnice 0.1.14, the latest release of the NAT traversal library implementing the RFC for Interactive Connectivity Establishment (ICE).

Release: libnice 0.1.14

Collabora in Linux Format

March 22, 2017 by Mark Filion  |   News and Events

Check out the April issue (#222) of Linux Format magazine for our new monthly column on all things Open Source, including graphics, multimedia and more!

Collabora in Linux Format

Two weeks, four events!

March 07, 2017 by Mark Filion  |   News and Events

Over the next two weeks, Collaborans will be present at four different events across the globe. If you plan on attending at any of these conferences, please reach out and say hello!

Two weeks, four events!

Search the newsroom

Upcoming Events

Here are the online events we'll be attending in the coming weeks – join us!

Linux App Summit

13-15 May, Online

PyCon US

14-15 May, Online

Web Engines Hackfest

18-19 May, Online

Embedded Vision Summit

25-27 May, Online

Open Since 2005 logo

We use cookies on this website to ensure that you get the best experience. By continuing to use this website you are consenting to the use of these cookies. To find out more please follow this link.

Collabora Ltd © 2005-2021. All rights reserved. Privacy Notice. Sitemap.

Collabora Limited is registered in England and Wales. Company Registration number: 5513718. Registered office: The Platinum Building, St John's Innovation Park, Cambridge, CB4 0DS, United Kingdom. VAT number: 874 1630 19.