July 05, 2022 by Marius Vlad | News & Events
The latest release of Weston was made on February 1, 2022. Meanwhile, a few bugs were discovered and we decided to do a bug-fix release, which we haven't had in several years.
June 21, 2022 by Kara Bembridge | News & Events
Part steadfast approach - part welcoming spirirt; Collabora continues to successfully expand with new talent amply on deck. Well ahead of the remote work curve, our new joiners have settled into their roles from their respective corners of the planet.
June 16, 2022 by Kara Bembridge | News & Events
Big events draw in an array of individuals to learn and connect, and the Open Source Summit North America is no exception. Jam-packed with sessions to uncover from June 21 to 24, this year's event features three talks by Collabora's very own!
June 15, 2022 by Manas Chaudhary | Blog
Getting PanVk, an open source driver for Arm Mali Midgard and Bifrost GPUs, closer to conformancy by implementing one of the core Vulkan features: support for secondary command buffers.
June 09, 2022 by Faith Ekstrand | Blog
After fighting with the divide between implicit and explicit synchronization with Vulkan on Linux for over seven years, we may finally have some closure. We're not to synchronization nirvana quite yet, but this is an important step along the way.
June 06, 2022 by Alyssa Rosenzweig | News & Events
Mali-G57 features in new MediaTek Chromebooks with the MT8192 and MT8195 system-on-chips. With Mesa 22.2 and an appropriate kernel, accelerated graphics will work out of the box on Linux on these laptops.
June 02, 2022 by Dmitry Osipenko | News & Events
Released by Linus Torvalds on May 22 after a busy two-month development cycle, Linux kernel 5.18 brings new features and lights up new hardware. Let's take a look at the contributions made by our engineering team.
May 31, 2022 by Moses Turner | Blog
Optical hand tracking for XR has a bit of a reputation - getting training data, training neural nets, and deploying them in real-time, low-latency environments such as XR is every bit as hard as they say it is.
May 26, 2022 by Kara Bembridge | News & Events
After a two-year hiatus, the City of Lights is shinning brightly again to welcome the community for a full week of engaging talks at Embedded Recipes and Kernel Recipes conferences.
May 17, 2022 by Kara Bembridge | News & Events
Less than a day away, May 18th looks to be a very busy time. With Live Embedded Event and Embedded Vision Summit taking place almost simultaneously, Collabora will be presenting four different talks!
April 29, 2022 by Frederic Danis | News & Events
Over the last two years, Bluetooth® audio support has steadily grown in PipeWire and has become a featureful, stable, conformant, open source Bluetooth® audio stack implementation. Here's a look at where things stand.
April 27, 2022 by Jakub Piotr Cłapa | News & Events
Looking to use hardware-backed and virtual SocketCAN interfaces inside your Kubernetes Pods? A new device plugin now allows processes inside a pod to communicate with each other using the full Linux SocketCAN API.
April 19, 2017 by Olivier Crête | Blog
With GStreamer 1.12's first release candidate out for testing and the final release expected soon, here's a brief preview of some of the (many) new features, bugfixes and improvements that will be arriving with this release.
April 10, 2017 by Gabriel Krisman Bertazi | Blog
Like the bug that no one can solve, many issues occur on the interface between the user application and the operating system. But even in the good Open Source world, understanding what is happening at these interfaces is not always easy.
April 05, 2017 by Daniel Stone | Blog
Today we all read the announcement of Ubuntu's decision to refocus on cloud and IoT activities, dropping Unity 8 to move back to a GNOME-based desktop for the 17.04 LTS.
March 29, 2017 by Robert Foss | Blog
Android uses the HWC API to communicate with graphics hardware. This API is not supported on the mainline Linux graphics stack, but by using drm_hwcomposer as a shim it now is.
March 28, 2017 by Gabriel Krisman Bertazi | Blog
Like starting a car with the hood open, sometimes you need to run your program with certain analysis tools attached to get a full sense of what is going wrong – or right.
March 24, 2017 by Simon McVittie | Blog
At the GTK hackfest in London (which accidentally became mostly a Flatpak hackfest) I've mainly been looking into how to make D-Bus work better for app container technologies like Flatpak and Snap.
March 21, 2017 by Gabriel Krisman Bertazi | Blog
Modern CPUs implement a number of technologies that may affect application performance in unpredictable ways. Figuring out what is going wrong with an application can be a hard task, but it can become much easier with the correct analysis tools.
March 13, 2017 by Frédéric Dalleau | Blog
Once you've setup a virtual machine in QEMU using debootstrap, there are a number of tools available for testing, tracing and debugging, such as Kmemleak for memory leaks, GDB (GNU Debugger), ftrace et dynamic_debug.
March 08, 2017 by Robert Foss | Blog
Before being able to write firmware data to any production Chromebook device, the Write-Protect screw has to be removed.
March 01, 2017 by Daniel Stone | Blog
The past few months have been busy ones on the open-source graphics front, bringing with them Wayland 1.13, Weston 2.0 and Mesa 17.0. Here's a look at some of these developments, including Collabora's behind-the-scenes work on performance improvement.
February 23, 2017 by Robert Foss | Blog
How to create your custom Android image, and APK app(s), all at once.
February 16, 2017 by Robert Foss | Blog
How to set up a fully functional ChromiumOS development environment on actual Chromebook hardware.
December 22, 2021 by Gustavo Padovan | News & Events
With over 350 patches authored and nearly 200 reviewed and tested in multiple subsystems, 2021 was a great year for Linux kernel development at Collabora. Here is a look at some of our achievements during the year.
December 20, 2021 by Christoph Haag | News & Events
The Linux desktop in VR goes headless! Introducing wxrd, a standalone Wayland compositor for xrdesktop based on wlroots, with minimal dependencies.
December 08, 2021 by Mark Filion | News & Events
A year of online conferences that began with linux.conf.au will end on a high note next week as Collaborans present three talks at Open Source Summit Japan + Automotive Linux Summit 2021. Join us!
November 10, 2021 by Sebastian Reichel | News & Events
It might be smaller than the last few kernels, but with well above 10,000 non-merge changes, the latest Linux kernel release still packs a punch. Released on October 31, kernel 5.15 brings lots of exciting new features.
November 02, 2021 by George Kiagiadakis | News & Events
Today marks a very exciting day as Fedora 35 has now been released, and with it comes WirePlumber as the default session manager for PipeWire! Under development by Collabora since 2019, WirePlumber has now entered the linux desktop space.
September 24, 2021 by Mark Filion | News & Events
Collaborans will be actively participating in next week's activities with seven talks on topics including Rust build scripts, embedded deep learning on GStreamer, HEVC decoding on mainline Linux, PipeWire and WirePlumber, and more.
September 21, 2021 by Alyssa Rosenzweig | News & Events
This important milestone is a step forward for the open source driver, as it now certifies Panfrost for use in commercial products containing Mali G52 and paves the way for further conformance submissions on other Mali GPUs.
September 16, 2021 by Stéphane Cerveau | News & Events
GStreamer can be tricky to ship in a constrained device. Thanks to a partnership with Huawei, you can now use gst-build to generate a minimal GStreamer build, tailored to a specific application, or set of applications. Here's how.
September 07, 2021 by Nícolas F. R. A. Prado | News & Events
With an ever-increasing interest in more modern hardware support, and a more reliable kernel that is thoroughly tested, contributions by Collabora's developers continue to help make this a reality for the Linux kernel.
September 01, 2021 by Mark Filion | News & Events
September's busy conference schedule kicks off next week with the Fall edition of Linaro Virtual Connect. Join us as we look at how to master your PipeWire streams with WirePlumber, and de-mystify GFX virtualization with VirGL!
July 20, 2021 by Alyssa Rosenzweig | News & Events
After a month of reverse-engineering the Arm Mali G78, we’re excited to release documentation on the Valhall instruction set, available as a PDF, as well as a Valhall assembler and disassembler to be used as a reverse-engineering aid.
July 08, 2021 by Gabriel Krisman Bertazi | News & Events
Collabora's team working directly on the Linux kernel is growing. Collaborans continue to expand on their efforts to close the gap between hardware support on vendor trees and mainline.
Here are the events we'll be attending in the coming weeks – come say hello!
July 17-18, Berlin, Germany
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português