September 11, 2020 by Raghavendra Rao | Blog
PipeWire continues to evolve with the recent integration of libcamera, a library to support complex cameras. In this blog post, I'll explain why libcamera exists, what it does, and how we integrated it in PipeWire.
August 31, 2020 by Emil Velikov | Blog
A high-level introduction of the Linux graphics stack, how it is used within ChromeOS, and the work done to improve software rendering (while simultaneously improving GPU rendering by reducing the boilerplate needed in applications).
August 27, 2020 by Gabriel Krisman Bertazi | Blog
Last year, a (controversial) feature was added to the Linux kernel to support optimized case-insensitive file name lookups in the Ext4 filesystem. Here's a look at why this was merged, what improvements have been made since, and how to put it to work.
August 24, 2020 by Mark Filion | News & Events
August ends on a high note with two virtual events this week: DebConf20, Debian's annual conference, and Linux Plumbers Conference, the premier event for developers working at all levels of the Linux kernel's plumbing layer and beyond.
August 21, 2020 by Antonio Caggiano | Blog
We have now integrated Mali GPU hardware counters supported by Panfrost with Perfetto's tracing SDK, unlocking all-in-one graphics-aware profiling on Panfrost systems!
August 20, 2020 by Antonio Ospite | Blog
Key performance improvements and fixes to GStreamer's RTP stack have landed in GStreamer 1.18, due in the coming months. The latest enhancements provide an important boost in throughput, opening the gate to high bitrate video streaming.
August 13, 2020 by Marcus Edel | Blog
Following our recent presentation at OSSummit, many showed interest in learning more about solving real-world problems with computer vision. Here is a new blog series, on computer vision, object detection, and building a system on the edge.
August 07, 2020 by Leandro Ribeiro | Blog
Recent work in Weston, the industry-standard Wayland compositor, has enabled DRM/KMS backends to be tested in the absence of real hardware, enabling more battle testing of corner-case and error conditions within automated testing frameworks.
August 05, 2020 by Dafna Hirschfeld | News & Events
The ability for a relatively small software consultancy to contribute at this level demonstrates a fantastic improvement in vendors' mindset when it comes to working Open First and providing mainline support out-of-box as early as possible.
July 17, 2020 by Christoph Haag | News & Events
HTC Vive (Pro) and Valve Index hardware users can now experiment with positional tracking in Monado, thanks to the implementation of a libsurvive driver using the libsurvive library developed by Charles Lohr, David Berger and many contributors.
July 16, 2020 by George Kiagiadakis | News & Events
It is with great pleasure that we announce the availability of WirePlumber (the PipeWire session manager) version 0.3.0. This release brings support for desktop use cases and is a working drop-in replacement for PipeWire's example session manager.
July 14, 2020 by Mylène Josserand | Blog
Initcalls, which serve to call functions during boot, were implemented early on in the development of the Linux Kernel. Read on as we take a closer look, including their purpose, their usage, ways to debug them (using initcall_debug or FTrace), and more.
December 02, 2022 by Deborah Brouwer | Blog
Earlier this year, I joined Collabora for a six-month internship to learn how V4L2 (Video4Linux2) supports stateless video hardware decoding, and build a utility that traced and replayed stateless decoding from a userspace perspective.
October 27, 2022 by Ashok Sidipotu | Blog
With the upcoming 0.5 release, WirePlumber's configuration system will be moving to a JSON syntax to define settings, bringing a more unified configuration approach across the PipeWire ecosystem.
October 19, 2022 by Igor Torrente | Blog
Venus is a virtual Vulkan driver based on the Virtio-GPU protocol, which defines the serialization of Vulkan commands between guest and host. Here's a closer look at Venus, its components, and their relations in the context of extensions.
October 11, 2022 by Vineet Suryan | Blog
Taking one step towards democratizing the daunting task of dataset generation by making image synthesis and automatic ground truth data generation maintainable, cheaper, and more repeatable.
September 14, 2022 by Marcus Edel | Blog
Using open source software, Collabora has developed an efficient compression pipeline that enables a face video broadcasting system that achieves the same visual quality as the H.264 standard while only using one-tenth of the bandwidth.
September 07, 2022 by Jason Ekstrand | Blog
Introducing new common code for Mesa Vulkan drivers to support a new Vulkan extension, making it easier for app and game authors to manage Vulkan state - and easier for our drivers too.
September 02, 2022 by Frederic Danis | Blog
Using PipeWire, WirePlumber and a Raspberry Pi, you can create an audio bridge between a Bluetooth® device and an analog speaker system, breathing new life into your old speakers.
July 07, 2022 by Gert Wollny | Blog
Adventures in NIR-land: the past, the present, and what's lies ahead for the native NIR back-end for Mesa's R600 driver.
June 15, 2022 by Manas Chaudhary | Blog
Getting PanVk, an open source driver for Arm Mali Midgard and Bifrost GPUs, closer to conformancy by implementing one of the core Vulkan features: support for secondary command buffers.
June 09, 2022 by Jason Ekstrand | Blog
After fighting with the divide between implicit and explicit synchronization with Vulkan on Linux for over seven years, we may finally have some closure. We're not to synchronization nirvana quite yet, but this is an important step along the way.
May 31, 2022 by Moses Turner | Blog
Optical hand tracking for XR has a bit of a reputation - getting training data, training neural nets, and deploying them in real-time, low-latency environments such as XR is every bit as hard as they say it is.
August 04, 2017 by Mark Filion | News and Events
Collabora is proud to once again be a Gold Sponsor of this year's DebConf, the annual Debian conference for developers! This year's week-long conference takes place from August 6 to 12 at Collège de Maisonneuve in beautiful Montréal, where one of our…
July 27, 2017 by Mark Filion | News and Events
Over the next few days, Collaborans will be getting back on the road and attending two events, one in Manchester and one in Los Angeles. We're also very pleased to be sponsoring one of these events!
July 04, 2017 by Martyn Welch | News & Events
Linux Kernel 4.12 is out, with 12 Collabora developers having contributed, a new record number of developers contributing to a single kernel release for Collabora!
June 27, 2017 by Mark Filion | News & Events
Our worldwide team of Open Source engineers and developers continues to grow with new additions in Core, Graphics & Web! Welcome Denis Pynkin, Alexandros Frantzis and Santosh Mahto!
June 02, 2017 by Mark Filion | News & Events
Collabora is proud to once again be sponsoring the latest round (Round 14) of Outreachy internships, which began earlier this week! More specifically, Collabora has chosen to sponsor the Linux kernel projects for the May-August semester.
May 30, 2017 by Mark Filion | News & Events
Over the next few days, Collabora is very excited to be taking part in three events where we'll be exhibiting as well as giving talks: Augmented World Expo, Automotive Linux Summit and Open Source Summit Japan.
May 16, 2017 by Mark Filion | News & Events
On the road again! Collaborans are heading to London, A Coruña & Buenos Aires to attend a VR event, a hackfest, a conference on Open Source systems, and a day of technical sessions on Vulkan! See you there?
May 08, 2017 by Mark Filion | News & Events
From May 9 to 11, Collabora will be attending the GENIVI All Member Meeting & Open Community Days: Advancing Connected Vehicles in a Connected World, in Birmingham, UK!
May 01, 2017 by Helen Fornazier | News & Events
Linux Kernel 4.11 was released yesterday, and 9 different Collabora developers contributed a total of 44 patches, while also reviewing 22 other patches.
April 18, 2017 by Mark Filion | News and Events
Collaborans are once again hitting the road and will be attending three separate events over the next new two weeks, in London, Las Vegas and Amsterdam
April 03, 2017 by Mark Filion | News and Events
Today, Olivier Crête, libnice maintainer and Collabora Multimedia Lead, announced the availability of libnice 0.1.14, the latest release of the NAT traversal library implementing the RFC for Interactive Connectivity Establishment (ICE).
Here are the events we'll be attending in the coming weeks – come say hello!
November 7-9, Prague, Czech Republic
November 15-18, Munich, Germany
November 19-20, Toulouse, France
November 29 - December 1, New Orleans, USA