News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

Bridging the synchronization gap on Linux

June 09, 2022 by Faith Ekstrand  |   Blog

After fighting with the divide between implicit and explicit synchronization with Vulkan on Linux for over seven years, we may finally have some closure. We're not to synchronization nirvana quite yet, but this is an important step along the way.

Bridging the synchronization gap on Linux

Conformant open source support for Mali-G57

June 06, 2022 by Alyssa Rosenzweig  |   News & Events

Mali-G57 features in new MediaTek Chromebooks with the MT8192 and MT8195 system-on-chips. With Mesa 22.2 and an appropriate kernel, accelerated graphics will work out of the box on Linux on these laptops.

Conformant open source support for Mali-G57

Kernel 5.18: Milestones for the road ahead

June 02, 2022 by Dmitry Osipenko  |   News & Events

Released by Linus Torvalds on May 22 after a busy two-month development cycle, Linux kernel 5.18 brings new features and lights up new hardware. Let's take a look at the contributions made by our engineering team.

Kernel 5.18: Milestones for the road ahead

Monado's hand tracking: hand-waving our way towards a first attempt

May 31, 2022 by Moses Turner  |   Blog

Optical hand tracking for XR has a bit of a reputation - getting training data, training neural nets, and deploying them in real-time, low-latency environments such as XR is every bit as hard as they say it is.

Monado's hand tracking: hand-waving our way towards a first attempt

Finding the secret ingredient at Embedded and Kernel Recipes

May 26, 2022 by Kara Bembridge  |   News & Events

After a two-year hiatus, the City of Lights is shinning brightly again to welcome the community for a full week of engaging talks at Embedded Recipes and Kernel Recipes conferences.

Finding the secret ingredient at Embedded and Kernel Recipes

Talks of the town: Software engineering edition

May 17, 2022 by Kara Bembridge  |   News & Events

Less than a day away, May 18th looks to be a very busy time. With Live Embedded Event and Embedded Vision Summit taking place almost simultaneously, Collabora will be presenting four different talks!

Talks of the town: Software engineering edition

PipeWire: Bluetooth support status update

April 29, 2022 by Frederic Danis  |   News & Events

Over the last two years, Bluetooth® audio support has steadily grown in PipeWire and has become a featureful, stable, conformant, open source Bluetooth® audio stack implementation. Here's a look at where things stand.

PipeWire: Bluetooth support status update

SocketCAN x Kubernetes

April 27, 2022 by Jakub Piotr Cłapa  |   News & Events

Looking to use hardware-backed and virtual SocketCAN interfaces inside your Kubernetes Pods? A new device plugin now allows processes inside a pod to communicate with each other using the full Linux SocketCAN API.

SocketCAN x Kubernetes

Monado accepted in GSoC 2022!

April 06, 2022 by Frédéric Plourde  |   News & Events

Monado has been accepted for the first time as a mentoring organization for the 2022 Google Summer of Code (GSoC)! Collabora will be providing three mentors to support contributors who want to work on Monado-related projects.

Monado accepted in GSoC 2022!

Visual-inertial tracking for Monado

April 05, 2022 by Mateo de Mayo  |   Blog

Monado now has initial support for 6DoF ("inside-out") tracking for devices with cameras and an IMU! Three free and open source SLAM/VIO solutions were integrated and adapted to work on XR: Kimera-VIO, ORB-SLAM3, and Basalt.

Visual-inertial tracking for Monado

Kernel 5.17: Solid & steady

March 31, 2022 by Sebastian Fricke  |   News & Events

While eastern Europe has experienced ghastly events that have shaken the world, the latest Linux kernel release could aptly be named "Solid & Steady." Here's a look at some of the contributions made by Collabora's kernel team.

Kernel 5.17: Solid & steady

Spotlight on Meson's full-featured developer environment

March 30, 2022 by Xavier Claessens  |   Blog

When developing an application or a library, it is very common to want to run it without installing it, or to install it into a custom prefix rather than on the system. Here's how Meson can help with that.

Spotlight on Meson's full-featured developer environment

Bridging the synchronization gap on Linux

June 09, 2022 by Faith Ekstrand  |   Blog

After fighting with the divide between implicit and explicit synchronization with Vulkan on Linux for over seven years, we may finally have some closure. We're not to synchronization nirvana quite yet, but this is an important step along the way.

Bridging the synchronization gap on Linux

Monado's hand tracking: hand-waving our way towards a first attempt

May 31, 2022 by Moses Turner  |   Blog

Optical hand tracking for XR has a bit of a reputation - getting training data, training neural nets, and deploying them in real-time, low-latency environments such as XR is every bit as hard as they say it is.

Monado's hand tracking: hand-waving our way towards a first attempt

Visual-inertial tracking for Monado

April 05, 2022 by Mateo de Mayo  |   Blog

Monado now has initial support for 6DoF ("inside-out") tracking for devices with cameras and an IMU! Three free and open source SLAM/VIO solutions were integrated and adapted to work on XR: Kimera-VIO, ORB-SLAM3, and Basalt.

Visual-inertial tracking for Monado

Spotlight on Meson's full-featured developer environment

March 30, 2022 by Xavier Claessens  |   Blog

When developing an application or a library, it is very common to want to run it without installing it, or to install it into a custom prefix rather than on the system. Here's how Meson can help with that.

Spotlight on Meson's full-featured developer environment

How to write a Vulkan driver in 2022

March 23, 2022 by Faith Ekstrand  |   Blog

An incredible amount has changed in Mesa and in the Vulkan ecosystems since we wrote the first Vulkan driver in Mesa for Intel hardware back in 2015. Not only has Vulkan grown, but Mesa has as well.

How to write a Vulkan driver in 2022

Improving the reliability of file system monitoring tools

March 14, 2022 by Gabriel Krisman Bertazi  |   Blog

Every file system used in production has tools to try to recover from system crashes. To provide a better infrastructure for those tools, our kernel team developed FAN_FS_ERROR, a new fanotify event which monitors error notifications.

Improving the reliability of file system monitoring tools

PipeWire: A year in review & a look ahead

March 08, 2022 by George Kiagiadakis  |   Blog

The PipeWire project made major strides over the past few years, bringing shiny new features, and paving the way for new possibilities in the Linux multimedia scene. A look what was accomplished in 2021, and what lies ahead for 2022.

PipeWire: A year in review & a look ahead

Landing a new syscall: What is futex?

February 08, 2022 by André Almeida  |   Blog

Over the past 18 months, we have been on a roller-coaster ride developing futex2, a new set of system calls. As part of this effort, the futex_waitv() syscall has now landed in Linux 5.16. But what exactly is futex?

Landing a new syscall: What is futex?

Writing an open source GPU driver - without the hardware

January 27, 2022 by Alyssa Rosenzweig  |   Blog

Until now, no Valhall devices (Mali-G57, Mali-G78) ran mainline Linux - whilst this made driver development obviously difficult, there’s no better time to write drivers than before the devices even get into the hands of end users.

Writing an open source GPU driver - without the hardware

A Pixel's Color & new documentation repository

January 25, 2022 by Pekka Paalanen  |   Blog

My work on Wayland and Weston color management and HDR support has been full of learning new concepts and terms. Many of them are crucial for understanding how color works, and what the values in a pixel actually mean.

A Pixel's Color & new documentation repository

Wine on Wayland year-end update: improved functionality & stability

December 22, 2021 by Alexandros Frantzis  |   Blog

It has been just over a year since we first announced our effort to implement a Wayland driver for Wine. Here's a recap of what has been done since then to improve both the functionality and stability of the driver.

Wine on Wayland year-end update: improved functionality & stability

Venus on QEMU: Enabling the new virtual Vulkan driver

November 26, 2021 by Antonio Caggiano  |   Blog

A step-by-step guide on how to enable 3D acceleration of Vulkan applications in QEMU through the new Venus experimental Vulkan driver for VirtIO-GPU with a local development environment.

Venus on QEMU: Enabling the new virtual Vulkan driver

GStreamer & automated testing in Lyon

October 30, 2019 by Mark Filion  |   News & Events

Following three days at ELCE, Collaborans are continuing their stay in the capital of France’s Auvergne-Rhône-Alpes region to take part the annual GStreamer Conference, as well as the Automated Testing Summit.

GStreamer & automated testing in Lyon

A new home for KernelCI

October 28, 2019 by Guillaume Tucker  |   News & Events

The KernelCI project, which powers kernelci.org with automated testing for the upstream Linux kernel, has found a new home after sailing through uncharted waters for over five years.

A new home for KernelCI

Embedded Linux Conference Europe 2019

October 25, 2019 by Mark Filion  |   News & Events

Next week, Collabora will be sponsoring, exhibiting & speaking at ELCE in Lyon, France. We'll be showcasing not one but two demos at our booth this year: arcade racing on a ROCK Pi 4 with Panfrost, and GStreamer on the Magic Leap One.

Embedded Linux Conference Europe 2019

Open graphics in Montreal

September 30, 2019 by Mark Filion  |   News & Events

Collabora is proud to be hosting in Montreal the 2019 edition of the X.Org Developer's Conference (XDC), the leading event for developers working on all things Open graphics, including the Linux kernel, Mesa, DRM, Wayland and X11.

Open graphics in Montreal

All the right ingredients in Paris

September 20, 2019 by Mark Filion  |   News & Events

Next week, Collaborans including Julian Bouzas and Enric Balletbò i Serra will be in Paris to participate in the 3rd edition of Embedded Recipes and 8th edition of Kernel Recipes

All the right ingredients in Paris

Linux Kernel 5.3

September 19, 2019 by Boris Brezillon  |   News & Events

Linux 5.3 was released over the weekend, which means it's time for our usual "where does Collabora stand in this picture?" tour. As has been the case for several years now, Collabora continues being an active contributor to the Linux kernel.

Linux Kernel 5.3

Open Source at IBC 2019

September 12, 2019 by Mark Filion  |   News & Events

Showcasing two brand new Open Source software demonstrations featuring the Xilinx high-performance Zynq UltraScale+ MPSoC, and the Magic Leap One augmented reality headset.

Open Source at IBC 2019

Bringing the FOSS XR community together

September 06, 2019 by Joey Ferwerda  |   News & Events

With the recent release of the OpenXR 1.0 specification, the presence of numerous Open Source platforms for Virtual Reality and Augmented Reality, and a growing community of developers, the need for a collaborative Open Source XR Conference became clear.

Bringing the FOSS XR community together

Embedded in San Diego

August 20, 2019 by Mark Filion  |   News & Events

Starting tomorrow, Collabora will be exhibiting & speaking at Embedded Linux Conference North America (ELCNA), the premier vendor-neutral technical conference for companies and developers using embedded Linux.

Embedded in San Diego

Linux Developer Conference Brazil 2019

August 02, 2019 by Mark Filion  |   News & Events

This weekend, Collaborans are in São Paulo, Brazil, to take part in the third edition of Linux Developer Conference Brazil, a conference which aims to take the Brazilian Linux development community to the international level.

Linux Developer Conference Brazil 2019

Moving the Linux desktop to another reality

July 30, 2019 by Lubosz Sarnecki  |   News & Events

Today, we are very excited to announce xrdesktop, a new open source project sponsored by Valve, enabling interaction with traditional Linux desktop environments, such as GNOME and KDE, in VR.

Moving the Linux desktop to another reality

Collabora & Debian 10 (Buster)

July 25, 2019 by Andrej Shadura  |   News & Events

With DebConf19, the annual conference for Debian contributors and users, in full swing this week in Curitiba, Brazil, what better time to look at the contributions made by Collaborans to the latest Debian release!

Collabora & Debian 10 (Buster)

Search the newsroom

Upcoming Events

Here are the events we'll be attending in the coming weeks – come say hello!

OpenXR Winter F2F

February 26-29, Seattle, WA, USA
 

Embedded World

April 9-11, Nuremberg, Germany

 

Featured Video

Open Since 2005 logo

We use cookies on this website to ensure that you get the best experience. By continuing to use this website you are consenting to the use of these cookies. To find out more please follow this link.

Collabora Ltd © 2005-2024. All rights reserved. Privacy Notice. Sitemap.