January 27, 2022 by Alyssa Rosenzweig | Blog
Until now, no Valhall devices (Mali-G57, Mali-G78) ran mainline Linux - whilst this made driver development obviously difficult, there’s no better time to write drivers than before the devices even get into the hands of end users.
January 25, 2022 by Pekka Paalanen | Blog
My work on Wayland and Weston color management and HDR support has been full of learning new concepts and terms. Many of them are crucial for understanding how color works, and what the values in a pixel actually mean.
January 20, 2022 by André Almeida | News & Events
With kernel 5.16, the community has once again produced a release full of great features, including two projects that had been in development for some time by our kernel team: the new futex syscall and the new fanotify event.
January 11, 2022 by Mark Filion | News & Events
The new year has only just begun, and already our first conference of 2022 is on the horizon. Join us at linux.conf.au, as we discuss bringing WebM Alpha support to GStreamer, and provide a status update on the futex2 syscall.
December 22, 2021 by Alexandros Frantzis | Blog
It has been just over a year since we first announced our effort to implement a Wayland driver for Wine. Here's a recap of what has been done since then to improve both the functionality and stability of the driver.
December 22, 2021 by Gustavo Padovan | News & Events
With over 350 patches authored and nearly 200 reviewed and tested in multiple subsystems, 2021 was a great year for Linux kernel development at Collabora. Here is a look at some of our achievements during the year.
December 20, 2021 by Christoph Haag | News & Events
The Linux desktop in VR goes headless! Introducing wxrd, a standalone Wayland compositor for xrdesktop based on wlroots, with minimal dependencies.
December 08, 2021 by Mark Filion | News & Events
A year of online conferences that began with linux.conf.au will end on a high note next week as Collaborans present three talks at Open Source Summit Japan + Automotive Linux Summit 2021. Join us!
November 26, 2021 by Antonio Caggiano | Blog
A step-by-step guide on how to enable 3D acceleration of Vulkan applications in QEMU through the new Venus experimental Vulkan driver for VirtIO-GPU with a local development environment.
November 10, 2021 by Sebastian Reichel | News & Events
It might be smaller than the last few kernels, but with well above 10,000 non-merge changes, the latest Linux kernel release still packs a punch. Released on October 31, kernel 5.15 brings lots of exciting new features.
November 02, 2021 by George Kiagiadakis | News & Events
Today marks a very exciting day as Fedora 35 has now been released, and with it comes WirePlumber as the default session manager for PipeWire! Under development by Collabora since 2019, WirePlumber has now entered the linux desktop space.
October 26, 2021 by Xavier Claessens | Blog
Maintaining a non-trivial set of GStreamer patches can be tricky. Thanks to the recent move to a single, unified git repo, you can now easily run a GStreamer continuous integration pipeline on your own GitLab instance. Here's how.
June 23, 2020 by Guillaume Desmottes | Blog
Previously, we discussed about how Rust can be a great language for embedded programming. In this article, we'll explain an easy setup to cross build Rust code depending on system libraries, a common requirement when working on embedded systems.
June 12, 2020 by Stéphane Cerveau | Blog
Adaptive streaming is a technique to provide flexibility and scalability by offering variable bit-rate streams to the client. Here's a quick guide on how to generate a MPEG-DASH stream (the most completely adaptive streaming technique) using GStreamer.
June 05, 2020 by Alyssa Rosenzweig | Blog
With only free software, a Mali G31 chip can now run Wayland compositors with zero-copy graphics, including GNOME 3. We can run every scene in glmark2-es2, 3D games like Neverball can be played, and video players mpv and Kodi are now supported.
May 27, 2020 by Adrian Ratiu | Blog
Device drivers can support more revisions and SoC platforms by abstracting away specific hardware interface layouts. Let's examine a specific instance of this process, namely the effort to make the MIPI DSI host controller driver more generic.
May 15, 2020 by Stéphane Cerveau | Blog
gst-build is one of the main build systems used by the community to develop the GStreamer platform. In my last blog post, I presented gst-build and explained how to get started with it. Now, let's get straight to the point regarding cross-compilation.
May 12, 2020 by Andre Almeida | Blog
In part 2 of this series on syzkaller, we looked at how to install the tool and use it to improve our code base. Now, how does syzkaller report a bug it finds in the execution path of a system call? Let's add a new syscall description and see how it goes.
May 07, 2020 by George Kiagiadakis | Blog
An in-depth look at WirePlumber, the modular and extensible session manager for PipeWire that brings advanced device management, policy control and security enforcement capabilities.
April 28, 2020 by Guillaume Desmottes | Blog
With Rust gaining traction among the GStreamer community as an alternative to C to write applications and plugins, we began wondering, could the size of such Rust plugins be a problem for embedded systems?
April 23, 2020 by Alyssa Rosenzweig | Blog
The Panfrost project building a free, Open Source graphics driver for modern Mali GPUs has reached a new milestone: the first 3D render, including basic texture support, on a Bifrost chip (Mali G31)!
April 20, 2020 by Mark Filion | Blog
Google Open Source has announced their 2020 first quarter Google Open Source Peer Bonus winners, and Alyssa Rosenzweig, Software Engineer at Collabora, is among the recipients!
April 17, 2020 by Andre Almeida | Blog
In my previous blog post, we discussed the importance of testing, what is fuzzing, and how the syzkaller fuzzes the kernel in order to find bugs. Now, let’s install the tool and starting using it to improve our code base.
April 14, 2020 by Mark Filion | Blog
Open Source software development thrives on remote collaboration, and continues to do so in 2020, with multiple projects announcing releases in the first quarter.
December 07, 2023 by Mark Filion | News & Events
Collabora is headed to California to take part in the inaugural edition of AI.dev: Open Source GenAI & ML Summit, a new event which aims to bring together the brightest developers from around the world to shape the trajectory of open source AI.
November 27, 2023 by George Kiagiadakis | News & Events
It is with the utmost excitement that we witness the release of PipeWire 1.0, the first officially stable release of this noteworthy inter-process multimedia streaming framework after many years of development.
November 21, 2023 by Kara Bembridge | News & Events
This week, the Debian project takes over Cambridge as MiniDebConf kicks off right in our own British backyard! Organized by Debian project members, MiniDebConfs aim to achieve similar objectives to those of the annual Debian conference, DebConf.
November 20, 2023 by Faith Ekstrand | News & Events
As of today, NVK is now an officially conformant implementation of the Vulkan 1.0 API on NVIDIA Turing hardware. This is the first time any Nouveau driver has gotten the Khronos conformance badge on any API.
November 09, 2023 by Kara Bembridge | News & Events
To ensure the Linux kernel is running smoothly, it requires maintenance from a variety of levels. Those working on the lower levels, or the plumber layers, of the kernel will have a chance to convene next week at the annual Linux Plumbers Conference.
November 02, 2023 by Vineet Suryan | News & Events
MLBench enables developers and maintainers to effortlessly gauge how their frameworks perform compared to other implementations, prior code versions, or across different boards, with respect to both runtime performance and other metrics.
October 31, 2023 by Laura Nao | News & Events
Linux Kernel 6.6 has arrived, bringing a significant amount of new features and performance enhancements. Collabora has actively contributed many patches, including work on MediaTek and Rockchip.
October 12, 2023 by Kara Bembridge | News & Events
The fall conference season continues next week with the X.Org Developer's Conference, taking place from October 17 to 19 in A Coruna, Spain. Sponsored by Collabora, this event brings together developers with an interest in open graphics.
September 21, 2023 by Kara Bembridge | News & Events
Sunny Spain will have multimedia developers on speed dial next week for the 11th edition of the GStreamer Conference, taking place at the Palexco Convention Centre in A Coruña from September 25 to 26.
September 19, 2023 by Kara Bembridge | News & Events
The world-renowned culinary scene in The City of Light will be getting a pack of different types of chefs next week for Kernel Recipes and Embedded Recipes. Kernel Recipes kicks off on September 25, then Embedded Recipes from September 28 to 29.
September 11, 2023 by Kara Bembridge | News & Events
Collabora is headed to Amsterdam! This year, we will be showcasing some of our recent work on the DAB protocol, as well as the software integration of LCEVC, MPEG's novel enhancement codec, into the GStreamer multimedia framework.
September 11, 2023 by Mateo de Mayo | News & Events
The Monado SLAM datasets (MSD) are egocentric visual-inertial SLAM datasets recorded to improve the Basalt-based inside-out tracking component of the Monado project.
Here are the events we'll be attending in the coming weeks – come say hello!
November 23-26, Cambridge, UK
December 12-13, San Jose, California
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português