January 27, 2022 by Alyssa Rosenzweig | Blog
Until now, no Valhall devices (Mali-G57, Mali-G78) ran mainline Linux - whilst this made driver development obviously difficult, there’s no better time to write drivers than before the devices even get into the hands of end users.
January 25, 2022 by Pekka Paalanen | Blog
My work on Wayland and Weston color management and HDR support has been full of learning new concepts and terms. Many of them are crucial for understanding how color works, and what the values in a pixel actually mean.
January 20, 2022 by André Almeida | News & Events
With kernel 5.16, the community has once again produced a release full of great features, including two projects that had been in development for some time by our kernel team: the new futex syscall and the new fanotify event.
January 11, 2022 by Mark Filion | News & Events
The new year has only just begun, and already our first conference of 2022 is on the horizon. Join us at linux.conf.au, as we discuss bringing WebM Alpha support to GStreamer, and provide a status update on the futex2 syscall.
December 22, 2021 by Alexandros Frantzis | Blog
It has been just over a year since we first announced our effort to implement a Wayland driver for Wine. Here's a recap of what has been done since then to improve both the functionality and stability of the driver.
December 22, 2021 by Gustavo Padovan | News & Events
With over 350 patches authored and nearly 200 reviewed and tested in multiple subsystems, 2021 was a great year for Linux kernel development at Collabora. Here is a look at some of our achievements during the year.
December 20, 2021 by Christoph Haag | News & Events
The Linux desktop in VR goes headless! Introducing wxrd, a standalone Wayland compositor for xrdesktop based on wlroots, with minimal dependencies.
December 08, 2021 by Mark Filion | News & Events
A year of online conferences that began with linux.conf.au will end on a high note next week as Collaborans present three talks at Open Source Summit Japan + Automotive Linux Summit 2021. Join us!
November 26, 2021 by Antonio Caggiano | Blog
A step-by-step guide on how to enable 3D acceleration of Vulkan applications in QEMU through the new Venus experimental Vulkan driver for VirtIO-GPU with a local development environment.
November 10, 2021 by Sebastian Reichel | News & Events
It might be smaller than the last few kernels, but with well above 10,000 non-merge changes, the latest Linux kernel release still packs a punch. Released on October 31, kernel 5.15 brings lots of exciting new features.
November 02, 2021 by George Kiagiadakis | News & Events
Today marks a very exciting day as Fedora 35 has now been released, and with it comes WirePlumber as the default session manager for PipeWire! Under development by Collabora since 2019, WirePlumber has now entered the linux desktop space.
October 26, 2021 by Xavier Claessens | Blog
Maintaining a non-trivial set of GStreamer patches can be tricky. Thanks to the recent move to a single, unified git repo, you can now easily run a GStreamer continuous integration pipeline on your own GitLab instance. Here's how.
February 17, 2021 by Benjamin Gaignard | Blog
Our recent efforts on the Hantro kernel driver have resulted in the addition of H.264 decoding support and multiple performance improvements. We are now introducing High Efficiency Video Coding, also known as H.265, decoding support on NXP's i.MX8 M.
February 08, 2021 by Jakub Adam | Blog
Hwangsaeul, or H8L, a remote surveillance streaming solution, utilizes the capability of libsrt to collect statistics from open SRT sockets and by continuously analyzing the available data tries to detect potential connectivity issues.
February 01, 2021 by Gert Wollny | Blog
Complex, real-world correctness tests and performance analysis are now possible thanks to gltrim, a new tool recently added to apitrace, designed to trim replayable traces to single, user-defined frames.
January 28, 2021 by Aaron Boxer | Blog
Earlier this week, WebRTC became an official W3C and IETF standard. GStreamer has a powerful and rapidly maturing WebRTC implementation. So, the obvious question is: how do we build this on Windows?
January 21, 2021 by Jaskaran Singh | Blog
Last year, from June to September, I worked on the kernel development tool Coccinelle under Collabora. I implemented a performance boosting algorithm for one of Coccinelle's use cases. Here's a look at this work.
January 13, 2021 by Alyssa Rosenzweig | Blog
The open source Panfrost driver for Arm Mali Midgard and Bifrost GPUs now provides non-conformant OpenGL ES 3.0 on Bifrost and desktop OpenGL 3.1 on Midgard (Mali T760 and newer) and Bifrost, in time for Mesa's first release of 2021.
November 30, 2020 by Eleni Katsoula | Blog
This year, the global pandemic has put a strain on us all. Motivation can become hard to maintain, worries can cloud our minds. Now more than ever, it is important to try and connect with our colleagues.
November 19, 2020 by Pekka Paalanen | Blog
Wayland is still lacking proper consideration for color management & support for high dynamic range (HDR) imagery. However, a group of developers has begun an effort to fix this situation. This is their story.
November 06, 2020 by Mike Blumenkrantz | Blog
This week marks two years since the OpenGL implementation on Vulkan was initially announced. Since then, and especially over the past few months, much has progressed with many new features being added and performance now close to native (95%!).
November 03, 2020 by Alyssa Rosenzweig | Blog
Since our previous update on Panfrost, the open source stack for Arm's Mali Midgard and Bifrost GPUs, we've focused on taking our driver from its reverse-engineered origins on Midgard to a mature stack.
October 20, 2020 by Gustavo Noronha | Blog
The concept of a remote internship may raise some doubts, or even red flags, for many students, as would remote jobs for professionals. As a result, we pay extra attention to how we onboard and support our interns.
September 28, 2020 by Aaron Boxer | Blog
GStreamer relies on various 2D font rendering and layout libraries such as Pango and Cairo to generate text for the Pango plugin, which contains elements such as textoverlay. Here's how to add the Pango plugin to a gst-build installation on Windows.
August 05, 2020 by Dafna Hirschfeld | News & Events
The ability for a relatively small software consultancy to contribute at this level demonstrates a fantastic improvement in vendors' mindset when it comes to working Open First and providing mainline support out-of-box as early as possible.
July 17, 2020 by Christoph Haag | News & Events
HTC Vive (Pro) and Valve Index hardware users can now experiment with positional tracking in Monado, thanks to the implementation of a libsurvive driver using the libsurvive library developed by Charles Lohr, David Berger and many contributors.
July 16, 2020 by George Kiagiadakis | News & Events
It is with great pleasure that we announce the availability of WirePlumber (the PipeWire session manager) version 0.3.0. This release brings support for desktop use cases and is a working drop-in replacement for PipeWire's example session manager.
July 09, 2020 by Erica Ryoo | News & Events
Despite the many obstacles brought on by the pandemic, Collabora continues to build and strengthen its engineering and administration teams for the road ahead. Join us in welcoming Angelica, Raghavendra, Doug, Italo and Theodotos!
June 30, 2020 by Lubosz Sarnecki | News & Events
The recent improvements in Monado like out of process compositing and multi-layer rendering released with v0.2 prepared the requirements to implement OpenXR's XR_EXTX_overlay extension.
June 18, 2020 by Mark Filion | News & Events
Collabora will be presenting on five separate occasions during the virtual editions of Embedded Linux Conference North America and Open Source Summit North America, taking place later this month.
June 04, 2020 by Andrzej Pietrasiewicz | News & Events
This latest release is the first to contain development work accomplished amid the lockdown measures. Despite these significant changes, Collaborans have also been steadfast in their contributions, with multiple projects progressing.
June 01, 2020 by Mark Filion | News & Events
Coding hss begun for this year's Google Summer of Code (GSoC) projects, announced earlier last month. The 2020 edition selected 1,199 students from 66 countries, to work with 199 mentoring organizations over the course of the summer.
May 29, 2020 by Jakob Bornecrantz | News & Events
With the excellent (online) edition of Augmented World Expo 2020 in full swing this week, what better time to announce version 0.2 of the Monado OpenXR runtime for Linux. It's been a very busy three months since the last Monado developer update!
May 18, 2020 by Mark Filion | News & Events
A few weeks ago, Ryan Pavlik presented "Unifying Reality: Building Experiences with OpenXR", a master class on OpenXR, the open standard API for building VR and AR experiences that work across devices, now and into the future.
May 08, 2020 by Lubosz Sarnecki | News & Events
Sponsored by Valve, this latest release of the Open Source project which enables interaction with traditional desktop environments, such as GNOME and KDE, in VR, brings the largest amount of changes yet, with many new features and architectural improvements.
April 30, 2020 by Lubosz Sarnecki | News & Events
A new monado-service binary and out of process compositor has landed in Monado, the fully Open Source OpenXR runtime for Linux! Here's a demo of the compositor's new abilities running with the new Blender OpenXR VR Session.
Here are the events we'll be attending in the coming weeks – come say hello!
November 23-26, Cambridge, UK
December 12-13, San Jose, California