January 27, 2022 by Alyssa Rosenzweig | Blog
Until now, no Valhall devices (Mali-G57, Mali-G78) ran mainline Linux - whilst this made driver development obviously difficult, there’s no better time to write drivers than before the devices even get into the hands of end users.
January 25, 2022 by Pekka Paalanen | Blog
My work on Wayland and Weston color management and HDR support has been full of learning new concepts and terms. Many of them are crucial for understanding how color works, and what the values in a pixel actually mean.
January 20, 2022 by André Almeida | News & Events
With kernel 5.16, the community has once again produced a release full of great features, including two projects that had been in development for some time by our kernel team: the new futex syscall and the new fanotify event.
January 11, 2022 by Mark Filion | News & Events
The new year has only just begun, and already our first conference of 2022 is on the horizon. Join us at linux.conf.au, as we discuss bringing WebM Alpha support to GStreamer, and provide a status update on the futex2 syscall.
December 22, 2021 by Alexandros Frantzis | Blog
It has been just over a year since we first announced our effort to implement a Wayland driver for Wine. Here's a recap of what has been done since then to improve both the functionality and stability of the driver.
December 22, 2021 by Gustavo Padovan | News & Events
With over 350 patches authored and nearly 200 reviewed and tested in multiple subsystems, 2021 was a great year for Linux kernel development at Collabora. Here is a look at some of our achievements during the year.
December 20, 2021 by Christoph Haag | News & Events
The Linux desktop in VR goes headless! Introducing wxrd, a standalone Wayland compositor for xrdesktop based on wlroots, with minimal dependencies.
December 08, 2021 by Mark Filion | News & Events
A year of online conferences that began with linux.conf.au will end on a high note next week as Collaborans present three talks at Open Source Summit Japan + Automotive Linux Summit 2021. Join us!
November 26, 2021 by Antonio Caggiano | Blog
A step-by-step guide on how to enable 3D acceleration of Vulkan applications in QEMU through the new Venus experimental Vulkan driver for VirtIO-GPU with a local development environment.
November 10, 2021 by Sebastian Reichel | News & Events
It might be smaller than the last few kernels, but with well above 10,000 non-merge changes, the latest Linux kernel release still packs a punch. Released on October 31, kernel 5.15 brings lots of exciting new features.
November 02, 2021 by George Kiagiadakis | News & Events
Today marks a very exciting day as Fedora 35 has now been released, and with it comes WirePlumber as the default session manager for PipeWire! Under development by Collabora since 2019, WirePlumber has now entered the linux desktop space.
October 26, 2021 by Xavier Claessens | Blog
Maintaining a non-trivial set of GStreamer patches can be tricky. Thanks to the recent move to a single, unified git repo, you can now easily run a GStreamer continuous integration pipeline on your own GitLab instance. Here's how.
June 11, 2021 by Alyssa Rosenzweig | Blog
Panfrost, the open source driver for Arm Mali, now supports OpenGL ES 3.1 on both Midgard (Mali T760 and newer) and Bifrost (Mali G31, G52, G72) GPUs, adding a number of features, notably including compute shaders.
May 17, 2021 by Gert Wollny | Blog
Collabora has been investing into Perfetto to enable driver authors & users to get deep insights into driver internals and GPU performance. Here's how we applied this work to study workloads on the virtualized VirGL implementation.
May 11, 2021 by Emil Velikov | Blog
The Hantro Video4Linux2 (V4L2) kernel module has gained support for another SoC! The Microchip SAMA5D4 features a single decode unit supporting MPEG2, VP8 and H.264 streams, alongside the built-in post-processing unit.
May 05, 2021 by Frederic Danis | Blog
DKMS is a framework that is mostly used to build and install external kernel modules. It can also be used to install a specific patch to the modules of the current kernel, such as applying a specific fix to the Bluetooth USB subsystem.
April 29, 2021 by Xavier Claessens | Blog
Building GTK 4 as a Meson subproject for your own application is not only useful for Windows builds, but also for many Linux distributions that do not yet package a recent enough version of GTK 4 and/or its dependencies.
April 22, 2021 by Antonio Caggiano | Blog
Recently, we have been using Perfetto to successfully profile Apitrace traces in crosvm through VirGL renderer. We have now added perfetto instrumentation to VirGL renderer, Mesa, and Apitrace to see what happens precisely in a frame.
April 20, 2021 by Marcus Edel | Blog
As part of a project backed by INVEST-AI, a program managed by IVADO Labs, we have developed a multi-stage neural network-based solution that accurately locates and tracks the hands despite complex background noise and occlusion between hands.
April 13, 2021 by Andrzej Pietrasiewicz | Blog
Did you know you could run a permissively-licensed MTP implementation with minimal dependencies on an embedded device? Here's a step-by-step guide on how to easily run cmtp-responder on a Rock Pi 4 or any other board equipped with a UDC.
March 24, 2021 by Guillaume Desmottes | Blog
Earlier this year, the Rust compiler gained support for LLVM source-base code coverage. In this post we'll explain how to setup a CI job in a Rust project to feed source-base coverage information to GitLab.
March 18, 2021 by Xavier Claessens | Blog
Over the past few months, I've been working on a side project to improve Meson sub-project support. The best stress test is to build projects on Windows, without msys2, because it has no dependencies or tools installed (e.g. pkg-config).
March 04, 2021 by Alexandra Pereira | Blog
The most complete automated testing and continuous integration tool for the Linux kernel continues to evolve at a rapid pace. Here's a look at the latest improvements to the KernelCI dashboard, the main web interface used by the project.
March 03, 2021 by Arnaud Ferraris | Blog
In the embedded world, many modern SoCs such as the ST Microelectronics STM32MP1 now include coprocessor cores which can be used for a wide range of tasks and can offload some of the work from the main processor.
September 10, 2018 by Mark Filion | News & Events
From September 14 to 18, Collabora will be exhibiting at the IBC Show 2018, the "world's most influential media, entertainment and technology show"! If you are planning on attending, please make sure to stop by our booth, D-15 in Hall 14!
August 28, 2018 by Mark Filion | News & Events
Starting tomorrow, Collaborans will be in beautiful British Columbia to take part, and speak, in this year's Open Source Summit North America! If you are planning on attending, come say hello or catch one of our presentations!
August 13, 2018 by Ezequiel Garcia | News & Events
Another two months and a half have passed, Linux Kernel v4.18 has been released, which means it's time to stop along the way and make a little retrospective. This time around, seven Collaborans have contributed to the kernel, authoring 61 commits.
July 31, 2018 by Jassie Badion | News & Events
Comprised of some of the most motivated and active Open Source contributors and maintainers around the world, our team shares a passion for technology and Open Source, as do these newest members. Welcome Gert, Gustavo, Erik, Christoph, Ryan & Ana!
July 26, 2018 by Mark Filion | News & Events
Collabora is heading East to sponsor & attend DebConf18, the annual Debian conference! The week-long event takes place for the first time in Asia, at the National Chiao Tung University Microelectronics & Information Research Center, in Hsinchu Taiwan.
June 29, 2018 by Mark Filion | News & Events
By this time next week, Collaborans will have arrived in Almería, Spain, to attend and speak at the 2018 edition of GUADEC, the annual GNOME conference. Come say hello!
June 04, 2018 by Enric Balletbò i Serra | News & Events
Linus Torvalds has now released the official Linux 4.17, so it’s time for our traditional blog post summing up our contributions to the latest version of the Linux kernel, which include a number of patches to the DRM subsystem.
April 20, 2018 by Mark Filion | News & Events
This weekend, we're headed to Gothenburg, Sweden, to meet the Nordic FOSS community at foss-north, a free / open source conference covering both software and hardware from the technical perspective!
April 06, 2018 by Mark Filion | News & Events
Attending the NAB Show in Las Vegas? Make sure to stop by Collabora's booth, #N2908VR in the North Hall, and get a firsthand look at the latest in Open Source software integration!
April 03, 2018 by Jassie Badion | News & Events
Meet the newest members of our ever-growing engineering and administrative teams! Welcome Arnaud, Omar, Correntin, Lakshmipathi, Rebecca, Ezequiel, Ritesh, Ana and Zeeshan!
April 02, 2018 by Gustavo Padovan | News & Events
Linux Kernel 4.16 was released over the weekend, and with it came 33 patches contributed by 8 different Collabora developers, including the addition of usb3 and extcon support for Rockchip RK3399 devices, and display support for the Nokia N9.
March 22, 2018 by Olivier Crête | News & Events
After a particularly long cycle of over 10 months, GStreamer accumulated many improvements that are now available in the 1.14 release. Here's a look at some of the contributions from Collabora's engineers that we're particularly proud of.
Here are the events we'll be attending in the coming weeks – come say hello!
November 23-26, Cambridge, UK
December 12-13, San Jose, California