News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

Integrating libcamera into PipeWire

September 11, 2020 by Raghavendra Rao  |   Blog

PipeWire continues to evolve with the recent integration of libcamera, a library to support complex cameras. In this blog post, I'll explain why libcamera exists, what it does, and how we integrated it in PipeWire.

Integrating libcamera into PipeWire

Pushing pixels to your Chromebook

August 31, 2020 by Emil Velikov  |   Blog

A high-level introduction of the Linux graphics stack, how it is used within ChromeOS, and the work done to improve software rendering (while simultaneously improving GPU rendering by reducing the boilerplate needed in applications).

Pushing pixels to your Chromebook

Using the Linux kernel's Case-insensitive feature in Ext4

August 27, 2020 by Gabriel Krisman Bertazi  |   Blog

Last year, a (controversial) feature was added to the Linux kernel to support optimized case-insensitive file name lookups in the Ext4 filesystem. Here's a look at why this was merged, what improvements have been made since, and how to put it to work.

Using the Linux kernel's Case-insensitive feature in Ext4

One week, two events: DebConf20 & Linux Plumbers Conference

August 24, 2020 by Mark Filion  |   News & Events

August ends on a high note with two virtual events this week: DebConf20, Debian's annual conference, and Linux Plumbers Conference, the premier event for developers working at all levels of the Linux kernel's plumbing layer and beyond.

One week, two events: DebConf20 & Linux Plumbers Conference

Panfrost performance counters with Perfetto

August 21, 2020 by Antonio Caggiano  |   Blog

We have now integrated Mali GPU hardware counters supported by Panfrost with Perfetto's tracing SDK, unlocking all-in-one graphics-aware profiling on Panfrost systems!

Panfrost performance counters with Perfetto

High bitrate video streaming with GStreamer's RTP elements

August 20, 2020 by Antonio Ospite  |   Blog

Key performance improvements and fixes to GStreamer's RTP stack have landed in GStreamer 1.18, due in the coming months. The latest enhancements provide an important boost in throughput, opening the gate to high bitrate video streaming.

High bitrate video streaming with GStreamer's RTP elements

Understanding computer vision & AI, part 1

August 13, 2020 by Marcus Edel  |   Blog

Following our recent presentation at OSSummit, many showed interest in learning more about solving real-world problems with computer vision. Here is a new blog series, on computer vision, object detection, and building a system on the edge.

Understanding computer vision & AI, part 1

Testing Weston DRM/KMS backends with virtme and VKMS

August 07, 2020 by Leandro Ribeiro  |   Blog

Recent work in Weston, the industry-standard Wayland compositor, has enabled DRM/KMS backends to be tested in the absence of real hardware, enabling more battle testing of corner-case and error conditions within automated testing frameworks.

Testing Weston DRM/KMS backends with virtme and VKMS

Kernel 5.8: Collabora's biggest & most significant contributions yet!

August 05, 2020 by Dafna Hirschfeld  |   News & Events

The ability for a relatively small software consultancy to contribute at this level demonstrates a fantastic improvement in vendors' mindset when it comes to working Open First and providing mainline support out-of-box as early as possible.

Kernel 5.8: Collabora's biggest & most significant contributions yet!

Lighthouse positional tracking in Monado with libsurvive

July 17, 2020 by Christoph Haag  |   News & Events

HTC Vive (Pro) and Valve Index hardware users can now experiment with positional tracking in Monado, thanks to the implementation of a libsurvive driver using the libsurvive library developed by Charles Lohr, David Berger and many contributors.

Lighthouse positional tracking in Monado with libsurvive

WirePlumber 0.3 released, now ready for the desktop

July 16, 2020 by George Kiagiadakis  |   News & Events

It is with great pleasure that we announce the availability of WirePlumber (the PipeWire session manager) version 0.3.0. This release brings support for desktop use cases and is a working drop-in replacement for PipeWire's example session manager.

WirePlumber 0.3 released, now ready for the desktop

An introduction to Linux kernel initcalls

July 14, 2020 by Mylène Josserand  |   Blog

Initcalls, which serve to call functions during boot, were implemented early on in the development of the Linux Kernel. Read on as we take a closer look, including their purpose, their usage, ways to debug them (using initcall_debug or FTrace), and more.

An introduction to Linux kernel initcalls

Quick hack: git reset upstream

August 27, 2018 by Robert Foss  |   Blog

Working with a git based project that has a defacto upstream repository means that you perioducally want to fetch the canonical master branch. This can be simplified with a .gitconfig alias.

Quick hack: git reset upstream

En route to a robust GPU device selection in GL

August 21, 2018 by Emil Velikov  |   Blog

A look at the work and motivation behind implementing the Khronos EGLDevice extensions in Mesa. These extensions allow users of open source graphics drivers to cleanly describe & select which device to use in heterogeneous systems.

En route to a robust GPU device selection in GL

Cross-compilation made easy for GNOME Builder

August 03, 2018 by Corentin Noël  |   Blog

GNOME Builder is an Integrated Development Environment designed for the GNOME ecosystem. It most notably features a deep integration to the Git version control system, allow to debug applications quickly and allow in-line documentation viewing.

Cross-compilation made easy for GNOME Builder

kms_swrast: A hardware-backed graphics driver

August 01, 2018 by Robert Foss  |   Blog

Presenting a new, hardware-backed, software graphics driver, built upon the Mesa gallium driver framework, which uses kernel kms drm nodes for memory allocation.

kms_swrast: A hardware-backed graphics driver

The docker.io Debian package is back to life

July 04, 2018 by Arnaud Rebillout  |   Blog

Last week, a new version of docker.io, the Docker package provided by Debian, was uploaded to Debian Unstable. Quickly afterwards, the package moved to Debian Testing, the first time in two years that docker.io has migrated to "testing".

The docker.io Debian package is back to life

Introducing debos, a versatile images generator

June 27, 2018 by Ana Guerrero López  |   Blog

In Debian and derivative systems, there are many ways to build images. The simplest tool of choice is often debootstrap. It works by downloading the .deb files from a mirror and unpacking them into a directory which can eventually be chrooted into.

Introducing debos, a versatile images generator

Secure video comes of age

June 25, 2018 by Olivier Crête  |   Blog

Launched by Haivision in 2017, and freely available on GitHub via the Mozilla Public License 2.0, SRT is an innovative UDP-based protocol enabling high-quality, low-latency video streaming across unpredictable networks.

Secure video comes of age

GStreamer CI support for embedded devices

June 11, 2018 by Omar Akkila  |   Blog

Embedded devices are a popular deployment target for GStreamer yet they are not tested on the project's Continuous Integration (CI) system. Here's a look at work done to introduce a Raspberry Pi for automated on-board testing using Jenkins, LAVA & more.

GStreamer CI support for embedded devices

Happy 20th, Open Source

June 05, 2018 by Mark Filion  |   Blog

In late January 1998, Netscape surprised everyone by releasing the source for Communicator, its web browser, making it readily available to all. The marked a turning point, and the birth of a new term, in software development: Open Source.

Happy 20th, Open Source

Four open months at Collabora

May 29, 2018 by Omar Akkila  |   Blog

At the start of 2018 in January, I joined Collabora, an open source software consultancy, as a Software Engineer Intern with the Multimedia team. Reaching the end of that internship, I would like to take the time to share my experience.

Four open months at Collabora

GStreamer spring in Sweden

May 18, 2018 by Zeeshan Ali  |   Blog

Earlier this month, Olivier Crête, Nicolas Dufresne, George Kiagiadakis & I attended the GStreamer Spring Hackfest in Lund, Sweden. Hosted by Axis, it was a great opportunity for the GStreamer community to touch base and work on open bugs and pet projects.

GStreamer spring in Sweden

GPU virtualization update

May 09, 2018 by Elie Tournier  |   Blog

A few months ago, Robert Foss wrote a blog post about virtualizing GPU Access. Here's a look at some of the major improvements that have landed upstream since then, including QEMU using OpenGL ES acceleration, as well as our plans for the future.

GPU virtualization update

A team that grows together, builds together

September 27, 2022 by Kara Bembridge  |   News & Events

Adding a variety of expertise from across the globe, the departments of Core, Multimedia, Kernel, XR, People Operations, and DevOps now have more hands on deck. Discover a snapshot of our newest teammates!

A team that grows together, builds together

A busy, open source week in Dublin!

September 12, 2022 by Mark Filion  |   News & Events

Mere weeks after the debut of Open Source Summit Latin America, Dublin continues the collaborative momentum with the 2022 hybrid editions of Linux Plumbers Conference and Open Source Summit Europe!

A busy, open source week in Dublin!

Open source machine learning at IBC 2022

September 06, 2022 by Kara Bembridge  |   News & Events

Showcasing two new software demonstrations featuring machine learning, including backend video compression that runs on Panfrost, and a data quality assurance tool designed to integrate into the annotation pipeline.

Open source machine learning at IBC 2022

Last chance to submit to FOSS XR!

August 30, 2022 by Frédéric Plourde  |   News & Events

Be part of the FOSSXR lineup by submitting your talk by September 5th, 2022. That means there's one week left for all you AR and VR enthusiasts and industry movers to share your exciting XR projects/news/demos with the world.

Last chance to submit to FOSS XR!

Fostering connections at Open Source Summit Latin America

August 16, 2022 by Kara Bembridge  |   News & Events

A magnet for open source supporters, the very first edition of Open Source Summit Latin America is opening its virtual doors. This new annual conference takes place online from August 23 to 24 with 5 talks from Collabora's very own!

Fostering connections at Open Source Summit Latin America

Kernel 5.19: Probably the final release of the 5.x series

August 02, 2022 by Cristian Ciocaltea  |   News & Events

As usual, there are quite a few changes merged into the mainline kernel. Let's take a look at some of the contributions by Collabora's kernel team!

Kernel 5.19: Probably the final release of the 5.x series

Weston 10.0.1 - a bug-fix release

July 05, 2022 by Marius Vlad  |   News & Events

The latest release of Weston was made on February 1, 2022. Meanwhile, a few bugs were discovered and we decided to do a bug-fix release, which we haven't had in several years.

Weston 10.0.1 - a bug-fix release

Adding even more heads for the group picture

June 21, 2022 by Kara Bembridge  |   News & Events

Part steadfast approach - part welcoming spirirt; Collabora continues to successfully expand with new talent amply on deck. Well ahead of the remote work curve, our new joiners have settled into their roles from their respective corners of the planet.

Adding even more heads for the group picture

Emerging ideas at Open Source Summit North America

June 16, 2022 by Kara Bembridge  |   News & Events

Big events draw in an array of individuals to learn and connect, and the Open Source Summit North America is no exception. Jam-packed with sessions to uncover from June 21 to 24, this year's event features three talks by Collabora's very own!

Emerging ideas at Open Source Summit North America

Conformant open source support for Mali-G57

June 06, 2022 by Alyssa Rosenzweig  |   News & Events

Mali-G57 features in new MediaTek Chromebooks with the MT8192 and MT8195 system-on-chips. With Mesa 22.2 and an appropriate kernel, accelerated graphics will work out of the box on Linux on these laptops.

Conformant open source support for Mali-G57

Kernel 5.18: Milestones for the road ahead

June 02, 2022 by Dmitry Osipenko  |   News & Events

Released by Linus Torvalds on May 22 after a busy two-month development cycle, Linux kernel 5.18 brings new features and lights up new hardware. Let's take a look at the contributions made by our engineering team.

Kernel 5.18: Milestones for the road ahead

Finding the secret ingredient at Embedded and Kernel Recipes

May 26, 2022 by Kara Bembridge  |   News & Events

After a two-year hiatus, the City of Lights is shinning brightly again to welcome the community for a full week of engaging talks at Embedded Recipes and Kernel Recipes conferences.

Finding the secret ingredient at Embedded and Kernel Recipes

Search the newsroom

Upcoming Events

Here are the events we'll be attending in the coming weeks – come say hello!

Akademy

October 1-7, Barcelona, Spain

XDC + WineConf + FOSS XR

October 4-6, Minneapolis, MN, USA

Tracing Summit

October 11-13, London, UK

Khronos F2F

August 8-11, Phoenix, AZ, USA

Open Since 2005 logo

We use cookies on this website to ensure that you get the best experience. By continuing to use this website you are consenting to the use of these cookies. To find out more please follow this link.

Collabora Ltd © 2005-2022. All rights reserved. Privacy Notice. Sitemap.