News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

Pushing pixels to your Chromebook

August 31, 2020 by Emil Velikov  |   Blog

A high-level introduction of the Linux graphics stack, how it is used within ChromeOS, and the work done to improve software rendering (while simultaneously improving GPU rendering by reducing the boilerplate needed in applications).

Pushing pixels to your Chromebook

Using the Linux kernel's Case-insensitive feature in Ext4

August 27, 2020 by Gabriel Krisman Bertazi  |   Blog

Last year, a (controversial) feature was added to the Linux kernel to support optimized case-insensitive file name lookups in the Ext4 filesystem. Here's a look at why this was merged, what improvements have been made since, and how to put it to work.

Using the Linux kernel's Case-insensitive feature in Ext4

One week, two events: DebConf20 & Linux Plumbers Conference

August 24, 2020 by Mark Filion  |   News & Events

August ends on a high note with two virtual events this week: DebConf20, Debian's annual conference, and Linux Plumbers Conference, the premier event for developers working at all levels of the Linux kernel's plumbing layer and beyond.

One week, two events: DebConf20 & Linux Plumbers Conference

Panfrost performance counters with Perfetto

August 21, 2020 by Antonio Caggiano  |   Blog

We have now integrated Mali GPU hardware counters supported by Panfrost with Perfetto's tracing SDK, unlocking all-in-one graphics-aware profiling on Panfrost systems!

Panfrost performance counters with Perfetto

High bitrate video streaming with GStreamer's RTP elements

August 20, 2020 by Antonio Ospite  |   Blog

Key performance improvements and fixes to GStreamer's RTP stack have landed in GStreamer 1.18, due in the coming months. The latest enhancements provide an important boost in throughput, opening the gate to high bitrate video streaming.

High bitrate video streaming with GStreamer's RTP elements

Understanding computer vision & AI, part 1

August 13, 2020 by Marcus Edel  |   Blog

Following our recent presentation at OSSummit, many showed interest in learning more about solving real-world problems with computer vision. Here is a new blog series, on computer vision, object detection, and building a system on the edge.

Understanding computer vision & AI, part 1

Testing Weston DRM/KMS backends with virtme and VKMS

August 07, 2020 by Leandro Ribeiro  |   Blog

Recent work in Weston, the industry-standard Wayland compositor, has enabled DRM/KMS backends to be tested in the absence of real hardware, enabling more battle testing of corner-case and error conditions within automated testing frameworks.

Testing Weston DRM/KMS backends with virtme and VKMS

Kernel 5.8: Collabora's biggest & most significant contributions yet!

August 05, 2020 by Dafna Hirschfeld  |   News & Events

The ability for a relatively small software consultancy to contribute at this level demonstrates a fantastic improvement in vendors' mindset when it comes to working Open First and providing mainline support out-of-box as early as possible.

Kernel 5.8: Collabora's biggest & most significant contributions yet!

Lighthouse positional tracking in Monado with libsurvive

July 17, 2020 by Christoph Haag  |   News & Events

HTC Vive (Pro) and Valve Index hardware users can now experiment with positional tracking in Monado, thanks to the implementation of a libsurvive driver using the libsurvive library developed by Charles Lohr, David Berger and many contributors.

Lighthouse positional tracking in Monado with libsurvive

WirePlumber 0.3 released, now ready for the desktop

July 16, 2020 by George Kiagiadakis  |   News & Events

It is with great pleasure that we announce the availability of WirePlumber (the PipeWire session manager) version 0.3.0. This release brings support for desktop use cases and is a working drop-in replacement for PipeWire's example session manager.

WirePlumber 0.3 released, now ready for the desktop

An introduction to Linux kernel initcalls

July 14, 2020 by Mylène Josserand  |   Blog

Initcalls, which serve to call functions during boot, were implemented early on in the development of the Linux Kernel. Read on as we take a closer look, including their purpose, their usage, ways to debug them (using initcall_debug or FTrace), and more.

An introduction to Linux kernel initcalls

Deep dive into OpenGL over DirectX layering

July 09, 2020 by Louis-Francis Ratté-Boulianne  |   Blog

Earlier this year, we announced a new project with Microsoft: the implementation of OpenCL & OpenGL to DirectX translation layers. Here's the latest on this work, including the steps taken to improve the performance of the OpenGL-On-D3D12 driver.

Deep dive into OpenGL over DirectX layering

Convincing your manager that upstreaming is in their best interest

November 28, 2018 by Martyn Welch  |   Blog

In an ideal world, everyone would implicitly understand that it just makes good business sense to upstream some of the modifications made when creating your Linux powered devices. Unfortunately, this is a long way from being common knowledge.

Convincing your manager that upstreaming is in their best interest

Metrics for test suite comprehensiveness

November 23, 2018 by Alexandros Frantzis  |   Blog

How can we measure the comprehensiveness of a test suite? Code coverage is the standard metric used in the industry and makes intuitive sense. However, it can often present some difficulties for large scale surveys.

Metrics for test suite comprehensiveness

Gaining eBPF vision: A new way to trace Linux filesystem disk requests

November 21, 2018 by Gabriel Krisman Bertazi  |   Blog

A real-world use case of eBPF tracing to understand file access patterns in the Linux kernel and optimize large applications.

Gaining eBPF vision: A new way to trace Linux filesystem disk requests

Quick hack: Speed up your GitLab CI

November 06, 2018 by Xavier Claessens  |   Blog

Did you know you could register your own PC, or a spare laptop collecting dust in a drawer, to get instant CI going on GitLab? Not only will you get faster CI, but you'll also reduce the queue on the shared runner for others!

Quick hack: Speed up your GitLab CI

Introducing Zink, an OpenGL implementation on top of Vulkan

October 31, 2018 by Erik Faye-Lund  |   Blog

For the last month or so, I've been playing with a new project during my work at Collabora, and as I've already briefly talked about at XDC 2018, it's about time to talk about it to a wider audience.

Introducing Zink, an OpenGL implementation on top of Vulkan

On the low adoption of automated testing in FOSS

October 18, 2018 by Alexandros Frantzis  |   Blog

For projects of any value and significance, having a comprehensive automated test suite is nowadays considered a standard software engineering practice. Why, then, don't we see more prominent FOSS projects employing this practice?

On the low adoption of automated testing in FOSS

Recently in Geoclue

October 12, 2018 by Zeeshan Ali  |   Blog

After I started working for Collabora in April, I've finally been able to put some time on maintenance and development of Geoclue again. While I've fixed quite a few issues on the backlog, there has been some significant changes as of late.

Recently in Geoclue

The beauty of Open Source

October 10, 2018 by Martyn Welch  |   Blog

Like all software, Open Source software isn't without it's bugs and issues. However, thanks to the nature of Open Source, resolving or mitigating the issue you encountered can be quite the satisfying adventure when it comes to scratching the itch.

The beauty of Open Source

MicroDebConf Brasilia

October 02, 2018 by Lucas Kanashiro  |   Blog

Last month, the first "MicroDebConf" took place at the Gama campus of the University of Brasilia. Here's a look at how this one day event came to be, and what was accomplished during that day.

MicroDebConf Brasilia

Virtme: The kernel developers' best friend

September 18, 2018 by Ezequiel Garcia  |   Blog

When working on the Linux Kernel, testing via QEMU is pretty common. Here's a look at virtme, a QEMU wrapper that uses the host instead of a virtual disk, making working with QEMU extremely easy.

Virtme: The kernel developers' best friend

Cambridge XMPP Sprint

August 30, 2018 by Maxime Buquet  |   Blog

Earlier this month, Collabora sponsored & hosted the XMMP Sprint, the first developer event in the XMPP community in a long time. Here's a look at what was accomplished over the weekend, and what's next for this open standard.

Cambridge XMPP Sprint

Testing Chromebooks with LAVA on kernelci.org

August 29, 2018 by Guillaume Tucker  |   Blog

In addition to Collabora's work to add support in mainline Linux kernel for several Chromebooks, these platforms are now being continuously tested as part of kernelci.org. Here's how to set them up for kernel development & automated testing with LAVA.

Testing Chromebooks with LAVA on kernelci.org

A busy, open source week in Dublin!

September 12, 2022 by Mark Filion  |   News & Events

Mere weeks after the debut of Open Source Summit Latin America, Dublin continues the collaborative momentum with the 2022 hybrid editions of Linux Plumbers Conference and Open Source Summit Europe!

A busy, open source week in Dublin!

Open source machine learning at IBC 2022

September 06, 2022 by Kara Bembridge  |   News & Events

Showcasing two new software demonstrations featuring machine learning, including backend video compression that runs on Panfrost, and a data quality assurance tool designed to integrate into the annotation pipeline.

Open source machine learning at IBC 2022

Last chance to submit to FOSS XR!

August 30, 2022 by Frédéric Plourde  |   News & Events

Be part of the FOSSXR lineup by submitting your talk by September 5th, 2022. That means there's one week left for all you AR and VR enthusiasts and industry movers to share your exciting XR projects/news/demos with the world.

Last chance to submit to FOSS XR!

Fostering connections at Open Source Summit Latin America

August 16, 2022 by Kara Bembridge  |   News & Events

A magnet for open source supporters, the very first edition of Open Source Summit Latin America is opening its virtual doors. This new annual conference takes place online from August 23 to 24 with 5 talks from Collabora's very own!

Fostering connections at Open Source Summit Latin America

Kernel 5.19: Probably the final release of the 5.x series

August 02, 2022 by Cristian Ciocaltea  |   News & Events

As usual, there are quite a few changes merged into the mainline kernel. Let's take a look at some of the contributions by Collabora's kernel team!

Kernel 5.19: Probably the final release of the 5.x series

Weston 10.0.1 - a bug-fix release

July 05, 2022 by Marius Vlad  |   News & Events

The latest release of Weston was made on February 1, 2022. Meanwhile, a few bugs were discovered and we decided to do a bug-fix release, which we haven't had in several years.

Weston 10.0.1 - a bug-fix release

Adding even more heads for the group picture

June 21, 2022 by Kara Bembridge  |   News & Events

Part steadfast approach - part welcoming spirirt; Collabora continues to successfully expand with new talent amply on deck. Well ahead of the remote work curve, our new joiners have settled into their roles from their respective corners of the planet.

Adding even more heads for the group picture

Emerging ideas at Open Source Summit North America

June 16, 2022 by Kara Bembridge  |   News & Events

Big events draw in an array of individuals to learn and connect, and the Open Source Summit North America is no exception. Jam-packed with sessions to uncover from June 21 to 24, this year's event features three talks by Collabora's very own!

Emerging ideas at Open Source Summit North America

Conformant open source support for Mali-G57

June 06, 2022 by Alyssa Rosenzweig  |   News & Events

Mali-G57 features in new MediaTek Chromebooks with the MT8192 and MT8195 system-on-chips. With Mesa 22.2 and an appropriate kernel, accelerated graphics will work out of the box on Linux on these laptops.

Conformant open source support for Mali-G57

Kernel 5.18: Milestones for the road ahead

June 02, 2022 by Dmitry Osipenko  |   News & Events

Released by Linus Torvalds on May 22 after a busy two-month development cycle, Linux kernel 5.18 brings new features and lights up new hardware. Let's take a look at the contributions made by our engineering team.

Kernel 5.18: Milestones for the road ahead

Finding the secret ingredient at Embedded and Kernel Recipes

May 26, 2022 by Kara Bembridge  |   News & Events

After a two-year hiatus, the City of Lights is shinning brightly again to welcome the community for a full week of engaging talks at Embedded Recipes and Kernel Recipes conferences.

Finding the secret ingredient at Embedded and Kernel Recipes

Talks of the town: Software engineering edition

May 17, 2022 by Kara Bembridge  |   News & Events

Less than a day away, May 18th looks to be a very busy time. With Live Embedded Event and Embedded Vision Summit taking place almost simultaneously, Collabora will be presenting four different talks!

Talks of the town: Software engineering edition

Search the newsroom

Upcoming Events

Here are the events we'll be attending in the coming weeks – come say hello!

Akademy

October 1-7, Barcelona, Spain

XDC + WineConf + FOSS XR

October 4-6, Minneapolis, MN, USA

Tracing Summit

October 11-13, London, UK

Khronos F2F

August 8-11, Phoenix, AZ, USA

Open Since 2005 logo

We use cookies on this website to ensure that you get the best experience. By continuing to use this website you are consenting to the use of these cookies. To find out more please follow this link.

Collabora Ltd © 2005-2022. All rights reserved. Privacy Notice. Sitemap.