News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

Emerging ideas at Open Source Summit North America

June 16, 2022 by Kara Bembridge  |   News & Events

Big events draw in an array of individuals to learn and connect, and the Open Source Summit North America is no exception. Jam-packed with sessions to uncover from June 21 to 24, this year's event features three talks by Collabora's very own!

Emerging ideas at Open Source Summit North America

Adding secondary command buffers to PanVk

June 15, 2022 by Manas Chaudhary  |   Blog

Getting PanVk, an open source driver for Arm Mali Midgard and Bifrost GPUs, closer to conformancy by implementing one of the core Vulkan features: support for secondary command buffers.

Adding secondary command buffers to PanVk

Bridging the synchronization gap on Linux

June 09, 2022 by Faith Ekstrand  |   Blog

After fighting with the divide between implicit and explicit synchronization with Vulkan on Linux for over seven years, we may finally have some closure. We're not to synchronization nirvana quite yet, but this is an important step along the way.

Bridging the synchronization gap on Linux

Conformant open source support for Mali-G57

June 06, 2022 by Alyssa Rosenzweig  |   News & Events

Mali-G57 features in new MediaTek Chromebooks with the MT8192 and MT8195 system-on-chips. With Mesa 22.2 and an appropriate kernel, accelerated graphics will work out of the box on Linux on these laptops.

Conformant open source support for Mali-G57

Kernel 5.18: Milestones for the road ahead

June 02, 2022 by Dmitry Osipenko  |   News & Events

Released by Linus Torvalds on May 22 after a busy two-month development cycle, Linux kernel 5.18 brings new features and lights up new hardware. Let's take a look at the contributions made by our engineering team.

Kernel 5.18: Milestones for the road ahead

Monado's hand tracking: hand-waving our way towards a first attempt

May 31, 2022 by Moses Turner  |   Blog

Optical hand tracking for XR has a bit of a reputation - getting training data, training neural nets, and deploying them in real-time, low-latency environments such as XR is every bit as hard as they say it is.

Monado's hand tracking: hand-waving our way towards a first attempt

Finding the secret ingredient at Embedded and Kernel Recipes

May 26, 2022 by Kara Bembridge  |   News & Events

After a two-year hiatus, the City of Lights is shinning brightly again to welcome the community for a full week of engaging talks at Embedded Recipes and Kernel Recipes conferences.

Finding the secret ingredient at Embedded and Kernel Recipes

Talks of the town: Software engineering edition

May 17, 2022 by Kara Bembridge  |   News & Events

Less than a day away, May 18th looks to be a very busy time. With Live Embedded Event and Embedded Vision Summit taking place almost simultaneously, Collabora will be presenting four different talks!

Talks of the town: Software engineering edition

PipeWire: Bluetooth support status update

April 29, 2022 by Frederic Danis  |   News & Events

Over the last two years, Bluetooth® audio support has steadily grown in PipeWire and has become a featureful, stable, conformant, open source Bluetooth® audio stack implementation. Here's a look at where things stand.

PipeWire: Bluetooth support status update

SocketCAN x Kubernetes

April 27, 2022 by Jakub Piotr Cłapa  |   News & Events

Looking to use hardware-backed and virtual SocketCAN interfaces inside your Kubernetes Pods? A new device plugin now allows processes inside a pod to communicate with each other using the full Linux SocketCAN API.

SocketCAN x Kubernetes

Monado accepted in GSoC 2022!

April 06, 2022 by Frédéric Plourde  |   News & Events

Monado has been accepted for the first time as a mentoring organization for the 2022 Google Summer of Code (GSoC)! Collabora will be providing three mentors to support contributors who want to work on Monado-related projects.

Monado accepted in GSoC 2022!

Visual-inertial tracking for Monado

April 05, 2022 by Mateo de Mayo  |   Blog

Monado now has initial support for 6DoF ("inside-out") tracking for devices with cameras and an IMU! Three free and open source SLAM/VIO solutions were integrated and adapted to work on XR: Kimera-VIO, ORB-SLAM3, and Basalt.

Visual-inertial tracking for Monado

Using the Linux kernel's Case-insensitive feature in Ext4

August 27, 2020 by Gabriel Krisman Bertazi  |   Blog

Last year, a (controversial) feature was added to the Linux kernel to support optimized case-insensitive file name lookups in the Ext4 filesystem. Here's a look at why this was merged, what improvements have been made since, and how to put it to work.

Using the Linux kernel's Case-insensitive feature in Ext4

Panfrost performance counters with Perfetto

August 21, 2020 by Antonio Caggiano  |   Blog

We have now integrated Mali GPU hardware counters supported by Panfrost with Perfetto's tracing SDK, unlocking all-in-one graphics-aware profiling on Panfrost systems!

Panfrost performance counters with Perfetto

High bitrate video streaming with GStreamer's RTP elements

August 20, 2020 by Antonio Ospite  |   Blog

Key performance improvements and fixes to GStreamer's RTP stack have landed in GStreamer 1.18, due in the coming months. The latest enhancements provide an important boost in throughput, opening the gate to high bitrate video streaming.

High bitrate video streaming with GStreamer's RTP elements

Understanding computer vision & AI, part 1

August 13, 2020 by Marcus Edel  |   Blog

Following our recent presentation at OSSummit, many showed interest in learning more about solving real-world problems with computer vision. Here is a new blog series, on computer vision, object detection, and building a system on the edge.

Understanding computer vision & AI, part 1

Testing Weston DRM/KMS backends with virtme and VKMS

August 07, 2020 by Leandro Ribeiro  |   Blog

Recent work in Weston, the industry-standard Wayland compositor, has enabled DRM/KMS backends to be tested in the absence of real hardware, enabling more battle testing of corner-case and error conditions within automated testing frameworks.

Testing Weston DRM/KMS backends with virtme and VKMS

An introduction to Linux kernel initcalls

July 14, 2020 by Mylène Josserand  |   Blog

Initcalls, which serve to call functions during boot, were implemented early on in the development of the Linux Kernel. Read on as we take a closer look, including their purpose, their usage, ways to debug them (using initcall_debug or FTrace), and more.

An introduction to Linux kernel initcalls

Deep dive into OpenGL over DirectX layering

July 09, 2020 by Louis-Francis Ratté-Boulianne  |   Blog

Earlier this year, we announced a new project with Microsoft: the implementation of OpenCL & OpenGL to DirectX translation layers. Here's the latest on this work, including the steps taken to improve the performance of the OpenGL-On-D3D12 driver.

Deep dive into OpenGL over DirectX layering

Using syzkaller, part 4: Driver fuzzing

June 26, 2020 by Ricardo Cañuelo Navarro  |   Blog

Syzkaller is much needed tool for Linux kernel testing and debugging. With some work, it can also be enhanced to find bugs in specific drivers, such as V4L2. Here's how.

Using syzkaller, part 4: Driver fuzzing

Cross building Rust GStreamer plugins for the Raspberry Pi

June 23, 2020 by Guillaume Desmottes  |   Blog

Previously, we discussed about how Rust can be a great language for embedded programming. In this article, we'll explain an easy setup to cross build Rust code depending on system libraries, a common requirement when working on embedded systems.

Cross building Rust GStreamer plugins for the Raspberry Pi

Generating MPEG-DASH streams for Open Source adaptive streaming with GStreamer

June 12, 2020 by Stéphane Cerveau  |   Blog

Adaptive streaming is a technique to provide flexibility and scalability by offering variable bit-rate streams to the client. Here's a quick guide on how to generate a MPEG-DASH stream (the most completely adaptive streaming technique) using GStreamer.

Generating MPEG-DASH streams for Open Source adaptive streaming with GStreamer

Bifrost meets GNOME: Onward & upward to zero graphics blobs

June 05, 2020 by Alyssa Rosenzweig  |   Blog

With only free software, a Mali G31 chip can now run Wayland compositors with zero-copy graphics, including GNOME 3. We can run every scene in glmark2-es2, 3D games like Neverball can be played, and video players mpv and Kodi are now supported.

Bifrost meets GNOME: Onward & upward to zero graphics blobs

Using regmaps to make Linux drivers more generic

May 27, 2020 by Adrian Ratiu  |   Blog

Device drivers can support more revisions and SoC platforms by abstracting away specific hardware interface layouts. Let's examine a specific instance of this process, namely the effort to make the MIPI DSI host controller driver more generic.

Using regmaps to make Linux drivers more generic

Kernel 6.7: New year, new Linux!

January 11, 2024 by Eugen Hristev  |   News & Events

Collabora's kernel team made a number of key contributions including a new kselftest for verifying driver probe of Devicetree-based platforms, multiple improvements to further improve support for MediaTek SoCs found in Chromebooks, and more.

Kernel 6.7: New year, new Linux!

Weston 13.0 release: Backends consolidation

December 21, 2023 by Marius Vlad  |   News & Events

Weston 13.0 brings multiple fixes and important changes, notably the ability to load multiple backends simultaneously. This can be used to load VNC, RDP, or PipeWire backends for remote access alongside the native DRM backend.

Weston 13.0 release: Backends consolidation

NVK holiday update: What we've achieved, and where we're headed

December 20, 2023 by Faith Ekstrand  |   News & Events

As 2023 draws to a close, I wanted to give a quick update on NVK, what's happened this year, and where we'll be headed in 2024. While previous posts have focused primarily on the technical details, this post will be more geared towards users.

NVK holiday update: What we've achieved, and where we're headed

WhisperSpeech makes its way to AI.dev

December 07, 2023 by Mark Filion  |   News & Events

Collabora is headed to California to take part in the inaugural edition of AI​.dev: Open Source GenAI & ML Summit, a new event which aims to bring together the brightest developers from around the world to shape the trajectory of open source AI.

WhisperSpeech makes its way to AI.dev

Ready for embedded: PipeWire 1.0 released

November 27, 2023 by George Kiagiadakis  |   News & Events

It is with the utmost excitement that we witness the release of PipeWire 1.0, the first officially stable release of this noteworthy inter-process multimedia streaming framework after many years of development.

Ready for embedded: PipeWire 1.0 released

MiniDebConf Cambridge 2023

November 21, 2023 by Kara Bembridge  |   News & Events

This week, the Debian project takes over Cambridge as MiniDebConf kicks off right in our own British backyard! Organized by Debian project members, MiniDebConfs aim to achieve similar objectives to those of the annual Debian conference, DebConf.

MiniDebConf Cambridge 2023

NVK reaches Vulkan 1.0 conformance

November 20, 2023 by Faith Ekstrand  |   News & Events

As of today, NVK is now an officially conformant implementation of the Vulkan 1.0 API on NVIDIA Turing hardware. This is the first time any Nouveau driver has gotten the Khronos conformance badge on any API.

NVK reaches Vulkan 1.0 conformance

Patch Ready for Linux Plumbers 2023

November 09, 2023 by Kara Bembridge  |   News & Events

To ensure the Linux kernel is running smoothly, it requires maintenance from a variety of levels. Those working on the lower levels, or the plumber layers, of the kernel will have a chance to convene next week at the annual Linux Plumbers Conference.

Patch Ready for Linux Plumbers 2023

Benchmarking machine learning frameworks

November 02, 2023 by Vineet Suryan  |   News & Events

MLBench enables developers and maintainers to effortlessly gauge how their frameworks perform compared to other implementations, prior code versions, or across different boards, with respect to both runtime performance and other metrics.

Benchmarking machine learning frameworks

Kernel 6.6: Long-awaited features and enhanced hardware support

October 31, 2023 by Laura Nao  |   News & Events

Linux Kernel 6.6 has arrived, bringing a significant amount of new features and performance enhancements. Collabora has actively contributed many patches, including work on MediaTek and Rockchip.

Kernel 6.6: Long-awaited features and enhanced hardware support

X.Org Developer's Conference 2023

October 12, 2023 by Kara Bembridge  |   News & Events

The fall conference season continues next week with the X.Org Developer's Conference, taking place from October 17 to 19 in A Coruna, Spain. Sponsored by Collabora, this event brings together developers with an interest in open graphics.

X.Org Developer's Conference 2023

Pressing play on GStreamer Conference 2023

September 21, 2023 by Kara Bembridge  |   News & Events

Sunny Spain will have multimedia developers on speed dial next week for the 11th edition of the GStreamer Conference, taking place at the Palexco Convention Centre in A Coruña from September 25 to 26.

Pressing play on GStreamer Conference 2023

Search the newsroom

Upcoming Events

Here are the events we'll be attending in the coming weeks – come say hello!

Embedded World

April 9-11, Nuremberg, Germany

 

ISC West

April 9-11, Las Vegas, USA

 

NAB Show

April 13-17, Las Vegas, USA

 

Open Source Summit North America

April 16-18, Seattle, USA

 

Khronos F2F

April 22-26, Brussels, Belgium

 

 

Featured Video

Open Since 2005 logo

We use cookies on this website to ensure that you get the best experience. By continuing to use this website you are consenting to the use of these cookies. To find out more please follow this link.

Collabora Ltd © 2005-2024. All rights reserved. Privacy Notice. Sitemap.