October 12, 2018 by Zeeshan Ali | Blog
After I started working for Collabora in April, I've finally been able to put some time on maintenance and development of Geoclue again. While I've fixed quite a few issues on the backlog, there has been some significant changes as of late.
October 12, 2018 by Mark Filion | News & Events
We're headed to Heraklion, Greece, to meet with the Panhellenic FOSS community at FOSSCOMM, a conference for programmers, students and anyone else interested in the open source movement!
October 10, 2018 by Martyn Welch | Blog
Like all software, Open Source software isn't without it's bugs and issues. However, thanks to the nature of Open Source, resolving or mitigating the issue you encountered can be quite the satisfying adventure when it comes to scratching the itch.
October 02, 2018 by Lucas Kanashiro | Blog
Last month, the first "MicroDebConf" took place at the Gama campus of the University of Brasilia. Here's a look at how this one day event came to be, and what was accomplished during that day.
September 20, 2018 by Mark Filion | News & Events
Next week, Collaborans will be heading to Paris, A Coruña & Berlin, to sponsor and speak at four different conferences: Embedded Recipes, Kernel Recipes, All Systems Go and XDC 2018. See you there?
September 18, 2018 by Ezequiel Garcia | Blog
When working on the Linux Kernel, testing via QEMU is pretty common. Here's a look at virtme, a QEMU wrapper that uses the host instead of a virtual disk, making working with QEMU extremely easy.
September 10, 2018 by Mark Filion | News & Events
From September 14 to 18, Collabora will be exhibiting at the IBC Show 2018, the "world's most influential media, entertainment and technology show"! If you are planning on attending, please make sure to stop by our booth, D-15 in Hall 14!
August 30, 2018 by Maxime Buquet | Blog
Earlier this month, Collabora sponsored & hosted the XMMP Sprint, the first developer event in the XMPP community in a long time. Here's a look at what was accomplished over the weekend, and what's next for this open standard.
August 29, 2018 by Guillaume Tucker | Blog
In addition to Collabora's work to add support in mainline Linux kernel for several Chromebooks, these platforms are now being continuously tested as part of kernelci.org. Here's how to set them up for kernel development & automated testing with LAVA.
August 28, 2018 by Mark Filion | News & Events
Starting tomorrow, Collaborans will be in beautiful British Columbia to take part, and speak, in this year's Open Source Summit North America! If you are planning on attending, come say hello or catch one of our presentations!
August 27, 2018 by Robert Foss | Blog
Working with a git based project that has a defacto upstream repository means that you perioducally want to fetch the canonical master branch. This can be simplified with a .gitconfig alias.
August 21, 2018 by Emil Velikov | Blog
A look at the work and motivation behind implementing the Khronos EGLDevice extensions in Mesa. These extensions allow users of open source graphics drivers to cleanly describe & select which device to use in heterogeneous systems.
June 26, 2019 by Alyssa Rosenzweig | Blog
In my last Panfrost blog post, I announced my internship goal: improve Panfrost to run GNOME3. GNOME is a popular Linux desktop making heavy use of OpenGL; to use GNOME with only free and open source software on a machine with Mali graphics, Panfrost…
June 24, 2019 by Andrzej Pietrasiewicz | Blog
Dummy_hcd which consists of a software-emulated host controller and a UDC chip. In other words, this means you can play with USB gadgets even if you don't have the appropriate hardware, because your PC can act as both a USB host and a USB device.
June 18, 2019 by Frédéric Danis | Blog
Both the Le Potato and OrangePi Zero Plus2 boards are already supported by Armbian. But how do you get a minimal Debian upstream image with only the packages you want? Debos is the perfect tool to do this.
June 05, 2019 by Alyssa Rosenzweig | Blog
Years ago, I joined the open-source community with a passion and a mission: to enable equal access to high-quality computing via open-source software. With this mission, I co-founded Panfrost, aiming to create an open-source driver for the Mali GPU.
May 23, 2019 by Ezequiel Garcia | Blog
With virtme, you can run a custom built kernel on top of our running root filesystem. In this post, we explore another example of virtme in action, and see how to test Video4Linux2 drivers on bleeding edge GStreamer builds.
May 16, 2019 by Andrzej Pietrasiewicz | Blog
Introducing cmtp-responder - a permissively licensed Media Transfer Protocol (MTP) responder implementation which allows embedded devices to provide MTP services and supports a core set of MTP operations.
May 14, 2019 by Adrian Ratiu | Blog
Up until now, talking in-depth about userspace tracing was deliberately avoided because it merits special treatment, hence this part devoted to it. We'll now look at the why of it, and we'll examine eBPF user tracing in two categories: static and dynamic.
May 08, 2019 by Santosh Mahto | Blog
After a successful team effort, the patch enabling the Chromium Embedded Framework (CEF) Ozone builds to run with different platform backends, such as Wayland, has finally landed upstream.
May 06, 2019 by Adrian Ratiu | Blog
Now that we've studied the mainstream way of developing and using eBPF programs on top of the low-level VM mechanisms, we'll look at projects taking different approaches, attempting solutions to some of the unique problems faced by embedded Linux.
May 02, 2019 by Robert Foss | Blog
A previous post introduced the SPURV Android compatibility layer for Wayland based Linux environment. In this post, we're going to dig into how you can run an Android application on the very common i.MX6 based Nitrogen6_MAX board.
April 26, 2019 by Adrian Ratiu | Blog
In part 1 and 2 of this series, we took a condensed in-depth look at the eBPF VM. In part 3, we define the high-level components of an eBPF program, including the backend, loader, frontend and data structures.
April 25, 2019 by Guillaume Desmottes | Blog
GStreamer's logging system is an incredibly powerful ally when debugging but it can sometimes be a bit daunting to dig through the massive amount of generated logs. I often find myself writing small scripts processing gst logs when debugging.
March 13, 2019 by Mark Filion | News & Events
Tomorrow, March 14, Collabora will be in Düsseldorf, Germany, to take part and exhibit at the second edition of the Renesas European R-Car Consortium Forum!
March 06, 2019 by Gaël Portay | News & Events
The first major release of Linux for the year 2019 was made available earlier this week, and with it came a new version number: 5.0. Here's a look at contributions made by Collaborans!
March 04, 2019 by Mark Filion | News & Events
Collaborans are in Tokyo this week to take part in the AGL All Member Meeting. They'll be discussing the future of IVI Window Management, and also look at the latest upstream work around the PipeWire framework and how it can benefit the automotive industry.
February 20, 2019 by Mark Filion | News & Events
Collabora is headed to Nuremberg, Germany to take part in this year's edition of Embedded World, the leading international fair for embedded systems! Come say hello, booth 4-280!
January 23, 2019 by Mark Filion | News & Events
In just over a week's time, Collabora will be heading to Brussels to take part in the 2019 edition of FOSDEM! Come say hello, or catch one of the 8 talks (in 5 different devrooms) given by Collaborans!
January 07, 2019 by Fabien Lahoudere | News & Events
A few weeks ago, in the final days leading up to Christmas, Linus Torvalds released Linux Kernel 4.20. Collaborans were once again active during this development cycle, contributing 22 patches, 112 reviews & 55 sign-offs. Here's a look at their contributions.
December 20, 2018 by Mark Filion | News & Events
As one year ends and another begins, Collabora is proud to be once again an Includer sponsor for the latest round (#17) of Outreachy internships, which began earlier this month! More specifically, Collabora is sponsoring the Linux kernel projects for…
December 04, 2018 by Mark Filion | News & Events
This week, Collaborans will be taking part, and speaking, in this year's ESE Kongress, Germany's largest congress for professional embedded software engineering.
November 16, 2018 by Mark Filion | News & Events
After a great time in Vancouver, Collaborans are headed this weekend to southern France to attend and speak at the 2018 edition of Capitole du Libre, a weekend dedicated to free and Open Source software!
November 12, 2018 by Mark Filion | News & Events
Widely recognized as the premier event for developers working at all levels of the Linux kernel's plumbing layer and beyond, this year's edition of LPC is jam-packed with microconferences, a refereed track, a Kernel Summit track, multiple BoFs, and more.
November 07, 2018 by Mark Filion | News & Events
While our regular column (this time on Video4Linux, written by Ezequiel Garcia) is alive and well in this month's issue of LXF, there's also something else worth highlighting: a 6-page interview with none other than Collabora's Graphics lead, Daniel Stone!
October 25, 2018 by Mark Filion | News & Events
After three great days attending and catching up with the community at ELCE, Collaborans are continuing their stay in Edinburgh to take part in the GStreamer Conference & Hackfest, the Linux Media Summit and the Automated Testing Summit.
Here are the events we'll be attending in the coming weeks – come say hello!
November 7-9, Prague, Czech Republic
November 15-18, Munich, Germany
November 19-20, Toulouse, France
November 29 - December 1, New Orleans, USA