October 12, 2018 by Zeeshan Ali | Blog
After I started working for Collabora in April, I've finally been able to put some time on maintenance and development of Geoclue again. While I've fixed quite a few issues on the backlog, there has been some significant changes as of late.
October 12, 2018 by Mark Filion | News & Events
We're headed to Heraklion, Greece, to meet with the Panhellenic FOSS community at FOSSCOMM, a conference for programmers, students and anyone else interested in the open source movement!
October 10, 2018 by Martyn Welch | Blog
Like all software, Open Source software isn't without it's bugs and issues. However, thanks to the nature of Open Source, resolving or mitigating the issue you encountered can be quite the satisfying adventure when it comes to scratching the itch.
October 02, 2018 by Lucas Kanashiro | Blog
Last month, the first "MicroDebConf" took place at the Gama campus of the University of Brasilia. Here's a look at how this one day event came to be, and what was accomplished during that day.
September 20, 2018 by Mark Filion | News & Events
Next week, Collaborans will be heading to Paris, A Coruña & Berlin, to sponsor and speak at four different conferences: Embedded Recipes, Kernel Recipes, All Systems Go and XDC 2018. See you there?
September 18, 2018 by Ezequiel Garcia | Blog
When working on the Linux Kernel, testing via QEMU is pretty common. Here's a look at virtme, a QEMU wrapper that uses the host instead of a virtual disk, making working with QEMU extremely easy.
September 10, 2018 by Mark Filion | News & Events
From September 14 to 18, Collabora will be exhibiting at the IBC Show 2018, the "world's most influential media, entertainment and technology show"! If you are planning on attending, please make sure to stop by our booth, D-15 in Hall 14!
August 30, 2018 by Maxime Buquet | Blog
Earlier this month, Collabora sponsored & hosted the XMMP Sprint, the first developer event in the XMPP community in a long time. Here's a look at what was accomplished over the weekend, and what's next for this open standard.
August 29, 2018 by Guillaume Tucker | Blog
In addition to Collabora's work to add support in mainline Linux kernel for several Chromebooks, these platforms are now being continuously tested as part of kernelci.org. Here's how to set them up for kernel development & automated testing with LAVA.
August 28, 2018 by Mark Filion | News & Events
Starting tomorrow, Collaborans will be in beautiful British Columbia to take part, and speak, in this year's Open Source Summit North America! If you are planning on attending, come say hello or catch one of our presentations!
August 27, 2018 by Robert Foss | Blog
Working with a git based project that has a defacto upstream repository means that you perioducally want to fetch the canonical master branch. This can be simplified with a .gitconfig alias.
August 21, 2018 by Emil Velikov | Blog
A look at the work and motivation behind implementing the Khronos EGLDevice extensions in Mesa. These extensions allow users of open source graphics drivers to cleanly describe & select which device to use in heterogeneous systems.
October 27, 2022 by Ashok Sidipotu | Blog
With the upcoming 0.5 release, WirePlumber's configuration system will be moving to a JSON syntax to define settings, bringing a more unified configuration approach across the PipeWire ecosystem.
October 19, 2022 by Igor Torrente | Blog
Venus is a virtual Vulkan driver based on the Virtio-GPU protocol, which defines the serialization of Vulkan commands between guest and host. Here's a closer look at Venus, its components, and their relations in the context of extensions.
October 11, 2022 by Vineet Suryan | Blog
Taking one step towards democratizing the daunting task of dataset generation by making image synthesis and automatic ground truth data generation maintainable, cheaper, and more repeatable.
September 14, 2022 by Marcus Edel | Blog
Using open source software, Collabora has developed an efficient compression pipeline that enables a face video broadcasting system that achieves the same visual quality as the H.264 standard while only using one-tenth of the bandwidth.
September 07, 2022 by Faith Ekstrand | Blog
Introducing new common code for Mesa Vulkan drivers to support a new Vulkan extension, making it easier for app and game authors to manage Vulkan state - and easier for our drivers too.
September 02, 2022 by Frederic Danis | Blog
Using PipeWire, WirePlumber and a Raspberry Pi, you can create an audio bridge between a Bluetooth® device and an analog speaker system, breathing new life into your old speakers.
July 07, 2022 by Gert Wollny | Blog
Adventures in NIR-land: the past, the present, and what's lies ahead for the native NIR back-end for Mesa's R600 driver.
June 15, 2022 by Manas Chaudhary | Blog
Getting PanVk, an open source driver for Arm Mali Midgard and Bifrost GPUs, closer to conformancy by implementing one of the core Vulkan features: support for secondary command buffers.
June 09, 2022 by Faith Ekstrand | Blog
After fighting with the divide between implicit and explicit synchronization with Vulkan on Linux for over seven years, we may finally have some closure. We're not to synchronization nirvana quite yet, but this is an important step along the way.
May 31, 2022 by Moshi Turner | Blog
Optical hand tracking for XR has a bit of a reputation - getting training data, training neural nets, and deploying them in real-time, low-latency environments such as XR is every bit as hard as they say it is.
April 05, 2022 by Mateo de Mayo | Blog
Monado now has initial support for 6DoF ("inside-out") tracking for devices with cameras and an IMU! Three free and open source SLAM/VIO solutions were integrated and adapted to work on XR: Kimera-VIO, ORB-SLAM3, and Basalt.
March 30, 2022 by Xavier Claessens | Blog
When developing an application or a library, it is very common to want to run it without installing it, or to install it into a custom prefix rather than on the system. Here's how Meson can help with that.
November 05, 2026 by Kara Bembridge | News & Events
Next week we'll be at electronica in Munich! In partnership with Renesas, Collabora will showcase real-time, low-latency ML video analytics on Renesas RZ/G2L and RZ/V2H platforms, using GStreamer for integrated video processing and on-device AI inference.
November 03, 2026 by Leandro Ribeiro | News & Events
Collabora authored 111 patches for Linux 7.3, spanning DRM core, Rust, MediaTek, Rockchip, and more. Highlights include a new color format property, per-connector hotplug events, sparse mappings in Panthor, and continued progress on Tyr.
October 26, 2026 by Faith Ekstrand | News & Events
Kraid is now the default Panfrost compiler for Valhall and newer Mali GPUs, delivering major reductions in shader instructions, spilling, compile time, and memory use while providing a stronger foundation for future compiler optimization.
October 06, 2026 by Sebastian Reichel | News & Events
A look at the USB-PD, PHY, hotplug, and DRM changes involved in making USB-C DisplayPort Alternate Mode work on RK3588/RK3576, and where they stand on the way to mainline Linux.
October 02, 2026 by Kara Bembridge | News & Events
Next week we'll be in Prague for a packed Open Source week! We’ll speak at the Linux Plumbers Conference and GStreamer Conference, and present two demos at the ELC Technical Showcase.
September 29, 2026 by Kara Bembridge | News & Events
We’ll be in Frankfurt this Thursday for the AMD Embedded Computing Summit! See a live demo of our AI Magic Mirror for a touchless, real-time experience.
September 23, 2026 by Kara Bembridge | News & Events
The annual X.Org Developer's Conference returns to Toronto September 28-30, and as a Gold Sponsor, Collabora's graphics team will present six talks and a workshop spanning Vulkan and Open Source GPU drivers.
September 17, 2026 by Kara Bembridge | News & Events
Next week we'll be in Paris for Kernel Recipes! We’re pleased to sponsor this gathering of the kernel community and contribute a talk on upstream H.264 and HEVC decoding for Rockchip RK3588/RK3576.
September 15, 2026 by Kara Bembridge | News & Events
Visit us at the STMicroelectronics booth at SIDO to see how the STM32MP2 platform enables responsive edge-AI applications for industrial use cases.
September 11, 2026 by Santosh Mahto | News & Events
Working closely with Google, we built the first RDK-based Chrobalt reference platform for third-party devices, enabling Chromium-based YouTube support, certification, and automation on embedded TVs and set-top boxes.
September 10, 2026 by Valentine Burley | News & Events
Turnip is the first Mesa driver to achieve official Vulkan conformance on Android, with stronger Android integration, shared Vulkan runtime improvements, and real-device CI testing on Qualcomm Adreno hardware.
September 08, 2026 by Kara Bembridge | News & Events
Join us in Montreal for the 10th edition of RustConf! Catch our talk on Tyr, the new Rust kernel driver for Arm Mali GPUs.
Here are the events we'll be attending in the coming weeks – come say hello!
November 5 - 8, Cambridge, United Kingdom
November 10 - 13, Munich, Germany
November 14 - 15, Toulouse, France
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português