June 15, 2023 by Ashok Sidipotu | Blog
Event Dispatcher, part of the upcoming WirePlumber 0.5 release, is a custom PipeWire event scheduling mechanism designed to address many of the fundamental issues in WirePlumber.
June 08, 2023 by Vineet Suryan | Blog
Contrary to traditional software development, data is more important than code in machine learning. Building a high-performing model requires using reliable, precisely labelled data but poor-quality data is not always obvious.
May 31, 2023 by Eugen Hristev | Blog
A while back I presented USB 2.0 host support that was added to U-boot for the Radxa Rock-5B RK3588 Rockchip board. This time, USB 3.0 was added with support for the host and gadget.
May 29, 2023 by Kara Bembridge | News & Events
Set in the heart of Silicon Valley, XR enthusiasts are eagerly awaiting to see the latest advancements on display at Augmented World Expo (AWE) 2023.
May 25, 2023 by Marius Vlad | News & Events
Released last week, Weston 12.0 brings a number of highlights including two new backends, support for multiple scanout devices, and the addition of new protocol implementations. Here's a look at some of the changes that have landed in this new version.
May 18, 2023 by Eugen Hristev | Blog
Work continues on the Radxa ROCK5B RK388, as PCIe and RTL8125B networking support in U-boot have now been added. Publishing code as Open Source can benefit many different other projects, and allows anyone to benefit.
May 03, 2023 by Rebecca Mckeever | Blog
NVK, an open-source Vulkan driver for NVIDIA hardware that is part of Mesa, now supports the Vulkan extension VK_KHR_multiview.
April 27, 2023 by Eugen Hristev | Blog
The beauty of Open Source is that we can reuse code written by many other people, keep their authorship, and credit them for their work, without needing to reinvent anything!
April 25, 2023 by Muhammad Usama Anjum | News & Events
Released earlier this week, Linux Kernel 6.3 brings thousands of new lines of code to improve the core kernel, architectural support, networking and filesystems.
April 20, 2023 by Kara Bembridge | News & Events
Spring is in bloom in the northern hemisphere, and with it comes three tech events we'll be attending - PyCon US, Shell & Display Next Hackfest, and Linaro Connect!
April 18, 2023 by Xavier Claessens | Blog
Want to develop your Meson project in a modern IDE? Make sure to install Meson VSCode extension which is now fully functional with the recent release of Meson 1.1.0!
April 05, 2023 by Vineet Suryan | Blog
Labeling errors are common in present open-source 3D perception datasets, which could have impactful consequences. To tackle this issue, we used Carlafox to automatically generate an error-free synthetic dataset for 3D perception.
December 02, 2022 by Deborah Brouwer | Blog
Earlier this year, I joined Collabora for a six-month internship to learn how V4L2 (Video4Linux2) supports stateless video hardware decoding, and build a utility that traced and replayed stateless decoding from a userspace perspective.
October 27, 2022 by Ashok Sidipotu | Blog
With the upcoming 0.5 release, WirePlumber's configuration system will be moving to a JSON syntax to define settings, bringing a more unified configuration approach across the PipeWire ecosystem.
October 19, 2022 by Igor Torrente | Blog
Venus is a virtual Vulkan driver based on the Virtio-GPU protocol, which defines the serialization of Vulkan commands between guest and host. Here's a closer look at Venus, its components, and their relations in the context of extensions.
October 11, 2022 by Vineet Suryan | Blog
Taking one step towards democratizing the daunting task of dataset generation by making image synthesis and automatic ground truth data generation maintainable, cheaper, and more repeatable.
September 14, 2022 by Marcus Edel | Blog
Using open source software, Collabora has developed an efficient compression pipeline that enables a face video broadcasting system that achieves the same visual quality as the H.264 standard while only using one-tenth of the bandwidth.
September 07, 2022 by Faith Ekstrand | Blog
Introducing new common code for Mesa Vulkan drivers to support a new Vulkan extension, making it easier for app and game authors to manage Vulkan state - and easier for our drivers too.
September 02, 2022 by Frederic Danis | Blog
Using PipeWire, WirePlumber and a Raspberry Pi, you can create an audio bridge between a Bluetooth® device and an analog speaker system, breathing new life into your old speakers.
July 07, 2022 by Gert Wollny | Blog
Adventures in NIR-land: the past, the present, and what's lies ahead for the native NIR back-end for Mesa's R600 driver.
June 15, 2022 by Manas Chaudhary | Blog
Getting PanVk, an open source driver for Arm Mali Midgard and Bifrost GPUs, closer to conformancy by implementing one of the core Vulkan features: support for secondary command buffers.
June 09, 2022 by Faith Ekstrand | Blog
After fighting with the divide between implicit and explicit synchronization with Vulkan on Linux for over seven years, we may finally have some closure. We're not to synchronization nirvana quite yet, but this is an important step along the way.
May 31, 2022 by Moshi Turner | Blog
Optical hand tracking for XR has a bit of a reputation - getting training data, training neural nets, and deploying them in real-time, low-latency environments such as XR is every bit as hard as they say it is.
April 05, 2022 by Mateo de Mayo | Blog
Monado now has initial support for 6DoF ("inside-out") tracking for devices with cameras and an IMU! Three free and open source SLAM/VIO solutions were integrated and adapted to work on XR: Kimera-VIO, ORB-SLAM3, and Basalt.
November 05, 2026 by Kara Bembridge | News & Events
Next week we'll be at electronica in Munich! In partnership with Renesas, Collabora will showcase real-time, low-latency ML video analytics on Renesas RZ/G2L and RZ/V2H platforms, using GStreamer for integrated video processing and on-device AI inference.
November 03, 2026 by Leandro Ribeiro | News & Events
Collabora authored 111 patches for Linux 7.3, spanning DRM core, Rust, MediaTek, Rockchip, and more. Highlights include a new color format property, per-connector hotplug events, sparse mappings in Panthor, and continued progress on Tyr.
October 26, 2026 by Faith Ekstrand | News & Events
Kraid is now the default Panfrost compiler for Valhall and newer Mali GPUs, delivering major reductions in shader instructions, spilling, compile time, and memory use while providing a stronger foundation for future compiler optimization.
October 06, 2026 by Sebastian Reichel | News & Events
A look at the USB-PD, PHY, hotplug, and DRM changes involved in making USB-C DisplayPort Alternate Mode work on RK3588/RK3576, and where they stand on the way to mainline Linux.
October 02, 2026 by Kara Bembridge | News & Events
Next week we'll be in Prague for a packed Open Source week! We’ll speak at the Linux Plumbers Conference and GStreamer Conference, and present two demos at the ELC Technical Showcase.
September 29, 2026 by Kara Bembridge | News & Events
We’ll be in Frankfurt this Thursday for the AMD Embedded Computing Summit! See a live demo of our AI Magic Mirror for a touchless, real-time experience.
September 23, 2026 by Kara Bembridge | News & Events
The annual X.Org Developer's Conference returns to Toronto September 28-30, and as a Gold Sponsor, Collabora's graphics team will present six talks and a workshop spanning Vulkan and Open Source GPU drivers.
September 17, 2026 by Kara Bembridge | News & Events
Next week we'll be in Paris for Kernel Recipes! We’re pleased to sponsor this gathering of the kernel community and contribute a talk on upstream H.264 and HEVC decoding for Rockchip RK3588/RK3576.
September 15, 2026 by Kara Bembridge | News & Events
Visit us at the STMicroelectronics booth at SIDO to see how the STM32MP2 platform enables responsive edge-AI applications for industrial use cases.
September 11, 2026 by Santosh Mahto | News & Events
Working closely with Google, we built the first RDK-based Chrobalt reference platform for third-party devices, enabling Chromium-based YouTube support, certification, and automation on embedded TVs and set-top boxes.
September 10, 2026 by Valentine Burley | News & Events
Turnip is the first Mesa driver to achieve official Vulkan conformance on Android, with stronger Android integration, shared Vulkan runtime improvements, and real-device CI testing on Qualcomm Adreno hardware.
September 08, 2026 by Kara Bembridge | News & Events
Join us in Montreal for the 10th edition of RustConf! Catch our talk on Tyr, the new Rust kernel driver for Arm Mali GPUs.
Here are the events we'll be attending in the coming weeks – come say hello!
December 7 - 9, Brussels, Belgium
December 9 - 13, Paris, France