July 31, 2023 by Eugen Hristev | Blog
I have been working on getting U-boot upstream up to speed for the Radxa Rock-5B Rockchip RK3588 board. One of the cool features that I recently published upstream is the ability to boot the board without any kind of non-volatile media (NVM) used.
July 27, 2023 by Mark Filion | News & Events
If you weren't able to attend Embedded Open Source Summit in Prague last month, you're in luck as all presentations were recorded and are now available on YouTube.
July 26, 2023 by Kara Bembridge | News & Events
After months of work, led by Collabora's own Faith Ekstrand, Red Hat's Karol Herbst, and numerous open source contributors, NVK is now considered ready to be merged into the main Mesa project.
July 20, 2023 by Daniel Stone | News & Events
Collabora continues to relentlessly shift the needle to make high-quality open-source software not just an aspiration, but an expectation. We're pleased to announce an extension of our collaboration with Arm, providing more surety and capability for Panfrost.
July 18, 2023 by Eugen Hristev | Blog
I previously talked about getting the bigger brother Rock 5B into mainline U-boot; this time I worked on the Rock 5A, an even tinier SBC based on Rockchip's RK3588S SoC that is one step closer to getting accepted.
July 13, 2023 by Kara Bembridge | News & Events
With Black Valley in Norway, and Akademy in Greece, this weekend's plans are all set or computer enthusiasts! Collabora is proud to sponsor both of these events as a chance for communities to come together and strengthen their bonds.
July 06, 2023 by Erik Faye-Lund | News & Events
Today, Imagination Technologies announced they are now using Zink for full OpenGL 4.6 support. This is the first time we've seen a hardware vendor trust Zink enough to completely side-step a native OpenGL driver and use it in a shipping product.
July 05, 2023 by Rogerio Alves Cardoso | News & Events
Released last week, Linux kernel 6.4 brings new features such as support for Intel LAM, user events for tracing, and the ability for the machine keyrings used for Machine Owner Keys to store only CA-enforced keys.
June 26, 2023 by Faith Ekstrand | News & Events
Looking back, it's amazing how much has happened in NVK in just the last 7 months. If development continues at this crazy pace, we may be looking at a pretty decent driver before too much longer.
June 22, 2023 by Kara Bembridge | News & Events
Taking place at the Prague Congress Centre from June 27 to 30, this new 4-day umbrella event brings multiple conferences, including Automotive Linux Summit (ALS) and Embedded Linux Conference (ELC), all under one roof.
June 20, 2023 by Daniel Almeida | Blog
Powered by Rust, the video codec stack on ARCVM is now bringing faster and more reliable video decoding on Chrome OS. Here's how Collabora has been helping shape video virtualization for Chromebooks, and what it means for end users.
June 15, 2023 by Ashok Sidipotu | Blog
Event Dispatcher, part of the upcoming WirePlumber 0.5 release, is a custom PipeWire event scheduling mechanism designed to address many of the fundamental issues in WirePlumber.
May 17, 2021 by Gert Wollny | Blog
Collabora has been investing into Perfetto to enable driver authors & users to get deep insights into driver internals and GPU performance. Here's how we applied this work to study workloads on the virtualized VirGL implementation.
May 11, 2021 by Emil Velikov | Blog
The Hantro Video4Linux2 (V4L2) kernel module has gained support for another SoC! The Microchip SAMA5D4 features a single decode unit supporting MPEG2, VP8 and H.264 streams, alongside the built-in post-processing unit.
May 05, 2021 by Frederic Danis | Blog
DKMS is a framework that is mostly used to build and install external kernel modules. It can also be used to install a specific patch to the modules of the current kernel, such as applying a specific fix to the Bluetooth USB subsystem.
April 29, 2021 by Xavier Claessens | Blog
Building GTK 4 as a Meson subproject for your own application is not only useful for Windows builds, but also for many Linux distributions that do not yet package a recent enough version of GTK 4 and/or its dependencies.
April 22, 2021 by Antonio Caggiano | Blog
Recently, we have been using Perfetto to successfully profile Apitrace traces in crosvm through VirGL renderer. We have now added perfetto instrumentation to VirGL renderer, Mesa, and Apitrace to see what happens precisely in a frame.
April 20, 2021 by Marcus Edel | Blog
As part of a project backed by INVEST-AI, a program managed by IVADO Labs, we have developed a multi-stage neural network-based solution that accurately locates and tracks the hands despite complex background noise and occlusion between hands.
April 13, 2021 by Andrzej Pietrasiewicz | Blog
Did you know you could run a permissively-licensed MTP implementation with minimal dependencies on an embedded device? Here's a step-by-step guide on how to easily run cmtp-responder on a Rock Pi 4 or any other board equipped with a UDC.
March 24, 2021 by Guillaume Desmottes | Blog
Earlier this year, the Rust compiler gained support for LLVM source-base code coverage. In this post we'll explain how to setup a CI job in a Rust project to feed source-base coverage information to GitLab.
March 18, 2021 by Xavier Claessens | Blog
Over the past few months, I've been working on a side project to improve Meson sub-project support. The best stress test is to build projects on Windows, without msys2, because it has no dependencies or tools installed (e.g. pkg-config).
March 04, 2021 by Alexandra Pereira | Blog
The most complete automated testing and continuous integration tool for the Linux kernel continues to evolve at a rapid pace. Here's a look at the latest improvements to the KernelCI dashboard, the main web interface used by the project.
March 03, 2021 by Arnaud Ferraris | Blog
In the embedded world, many modern SoCs such as the ST Microelectronics STM32MP1 now include coprocessor cores which can be used for a wide range of tasks and can offload some of the work from the main processor.
February 17, 2021 by Benjamin Gaignard | Blog
Our recent efforts on the Hantro kernel driver have resulted in the addition of H.264 decoding support and multiple performance improvements. We are now introducing High Efficiency Video Coding, also known as H.265, decoding support on NXP's i.MX8 M.
April 22, 2025 by Faith Ekstrand | News & Events
As of today, NVK is a conformant Vulkan 1.4 implementation for NVIDIA Maxwell, Pascal, and Volta GPUs, and will be enabled by default starting with Mesa 25.1.
April 17, 2025 by Eleni Katsoula | News & Events
Our commitment to open source extends beyond contributing code. We are dedicated to upholding the highest standards of license compliance throughout our development processes.
April 15, 2025 by Mark Filion | News & Events
This May, Embedded Recipes 2025, co-sponsored by Collabora, heads to Nice, France with talks, workshops, and a PipeWire hackfest, all bookended by the Linux Media Summit and the GStreamer Spring Hackfest!
April 14, 2025 by Erik Faye-Lund | News & Events
PanVK has reached a new milestone, and is now officially conformant with the Vulkan 1.1 specification on the Arm Mali-G610 GPU! The submission was done from the Mesa 25.0.2 release, and covers both armhf as well as aarch64 architectures.
April 10, 2025 by Daniel Stone | News & Events
Three demos. One stand. From end-to-end HDR and a brand-new SoC running PanVK, to NVK and WebGPU out of the box — discover how Collabora pushed open source graphics forward at Embedded World 2025.
April 09, 2025 by Olivier Crête | News & Events
Collabora once again played a key role in the latest release of GStreamer, contributing enhancements such as improved hardware efficiency, support for the MPEG-5 LCEVC codec, and better integration for analytics and machine learning.
March 26, 2025 by Cristian Ciocaltea | News & Events
The kernel release emphasizes the continuing growth and maturity of the Linux ecosystem and delivers new features, improvements, and optimizations that everyone will be eager to explore. See where Collabora's kernel team contributed to this release.
March 26, 2025 by Kara Bembridge | News & Events
Collabora is thrilled to see its partner, Hololight, join the Khronos Group and become an active member of the OpenXR Working Group. We are excited to support their innovative approach and rapid expansion in the XR streaming space.
March 11, 2025 by Faith Ekstrand | News & Events
Starting with Mesa 25.1, Nouveau users will no longer get the old Nouveau OpenGL driver by default and will instead get Zink+NVK.
March 10, 2025 by Sjoerd Simons | News & Events
Towards the end of 2024, MediaTek and Collabora started on a journey to improve upstream support for MediaTek Genio devices. Here's where things stand.
March 07, 2025 by Dylan Aïssi | News & Events
Apertis v2025 has landed with all the updates from Debian 12.9. This release has a variety of updates including new supported boards, improved release processes, and more!
February 27, 2025 by Mark Filion | News & Events
Join us at the NürnbergMesse in Nuremberg, Germany, as we take part in Embedded World 2025, one of the largest trade fairs of its kind, and a global platform for the embedded community!
Here are the events we'll be attending in the coming weeks – come say hello!
May 8-9, Stuttgart, Germany
May 12-14, Seoul, South Korea
May 13, Nice, France
May 14-16, Nice, France
May 16-18, Nice, France
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português