January 27, 2022 by Alyssa Rosenzweig | Blog
Until now, no Valhall devices (Mali-G57, Mali-G78) ran mainline Linux - whilst this made driver development obviously difficult, there’s no better time to write drivers than before the devices even get into the hands of end users.
January 25, 2022 by Pekka Paalanen | Blog
My work on Wayland and Weston color management and HDR support has been full of learning new concepts and terms. Many of them are crucial for understanding how color works, and what the values in a pixel actually mean.
January 20, 2022 by André Almeida | News & Events
With kernel 5.16, the community has once again produced a release full of great features, including two projects that had been in development for some time by our kernel team: the new futex syscall and the new fanotify event.
January 11, 2022 by Mark Filion | News & Events
The new year has only just begun, and already our first conference of 2022 is on the horizon. Join us at linux.conf.au, as we discuss bringing WebM Alpha support to GStreamer, and provide a status update on the futex2 syscall.
December 22, 2021 by Alexandros Frantzis | Blog
It has been just over a year since we first announced our effort to implement a Wayland driver for Wine. Here's a recap of what has been done since then to improve both the functionality and stability of the driver.
December 22, 2021 by Gustavo Padovan | News & Events
With over 350 patches authored and nearly 200 reviewed and tested in multiple subsystems, 2021 was a great year for Linux kernel development at Collabora. Here is a look at some of our achievements during the year.
December 20, 2021 by Christoph Haag | News & Events
The Linux desktop in VR goes headless! Introducing wxrd, a standalone Wayland compositor for xrdesktop based on wlroots, with minimal dependencies.
December 08, 2021 by Mark Filion | News & Events
A year of online conferences that began with linux.conf.au will end on a high note next week as Collaborans present three talks at Open Source Summit Japan + Automotive Linux Summit 2021. Join us!
November 26, 2021 by Antonio Caggiano | Blog
A step-by-step guide on how to enable 3D acceleration of Vulkan applications in QEMU through the new Venus experimental Vulkan driver for VirtIO-GPU with a local development environment.
November 10, 2021 by Sebastian Reichel | News & Events
It might be smaller than the last few kernels, but with well above 10,000 non-merge changes, the latest Linux kernel release still packs a punch. Released on October 31, kernel 5.15 brings lots of exciting new features.
November 02, 2021 by George Kiagiadakis | News & Events
Today marks a very exciting day as Fedora 35 has now been released, and with it comes WirePlumber as the default session manager for PipeWire! Under development by Collabora since 2019, WirePlumber has now entered the linux desktop space.
October 26, 2021 by Xavier Claessens | Blog
Maintaining a non-trivial set of GStreamer patches can be tricky. Thanks to the recent move to a single, unified git repo, you can now easily run a GStreamer continuous integration pipeline on your own GitLab instance. Here's how.
March 19, 2020 by Stéphane Cerveau | Blog
GStreamer relies on multiple repositories such as base and good to build its ecosystem, and now owns more than 30 projects in Gitlab. So, a unified tool/build system has always been necessary to build a specified version.
March 10, 2020 by Olivier Potin | Blog
Here at Collabora, we trust our people to work remotely, we give them full responsibility for their output, and we believe it helps creating an even stronger internal culture and comes with some other positives.
March 05, 2020 by Julian Bouzas | Blog
PipeWire 0.3 was released a few days ago, marking a big step forward in the effort of making this emerging media service the core layer of all multimedia on Linux.
February 27, 2020 by Alyssa Rosenzweig | Blog
Panfrost's ES 3.0 support has landed in upstream Mesa and works with a mainline Linux kernel. The support is still early, but if you're feeling adventurous, feel free to give it a try on your favourite ES 3.0 applications and games.
February 18, 2020 by Andrej Shadura | Blog
When a bug surprises you when doing Apertis packaging of a typical vendor code signing tool, it's time to debug it using the compiler's built-in tools.
February 05, 2020 by Mark Filion | Blog
From KernelCI's new home, the latest on Zink (OpenGL on Vulkan), OpenXR & Monado, PipeWire in the automotive industry, JPEG2000, and GStreamer on the Magic Leap One, Collaborans gave talks in 6 different devrooms, as well on the main track.
December 20, 2019 by Alyssa Rosenzweig | Blog
If you have a device with a Mali T720 or T820 GPU, you’re in luck – your device is now supported in upstream Mesa at feature parity with other GPUs. Get out your Allwinner H6 or Amlogic S912 board, grab the latest Mesa, and enjoy a match of SuperTuxKart!
December 09, 2019 by Julian Bouzas | Blog
PipeWire, the new and emerging open source framework that aims to greatly improve the exchange and management of audio and video streams inside a Linux system, has seen a number of improvements and bug fixes over the past year.
November 26, 2019 by Aaron Boxer | Blog
With the advent of meson and gst-build, it is now possible to set up a GStreamer Windows development environment that rivals the finest Linux has to offer, with full support for Visual Studio debugging into the library.
October 24, 2019 by Erik Faye-Lund | Blog
I recently went to XDC 2019, where I gave yet another talk about Zink. I kinda forgot to write a blog-post about it, so here’s me trying to make up for it… or something like that. I’ll also go into some more recent developments as well.
October 09, 2019 by Dafna Hirschfeld | Blog
Prior to joining Collabora, I took part in Round 17 of the Outreachy internships, to work on the virtual drivers in the media subsystem of the Linux kernel, or more specifically, on the vicodec driver.
September 16, 2021 by Stéphane Cerveau | News & Events
GStreamer can be tricky to ship in a constrained device. Thanks to a partnership with Huawei, you can now use gst-build to generate a minimal GStreamer build, tailored to a specific application, or set of applications. Here's how.
September 07, 2021 by Nícolas F. R. A. Prado | News & Events
With an ever-increasing interest in more modern hardware support, and a more reliable kernel that is thoroughly tested, contributions by Collabora's developers continue to help make this a reality for the Linux kernel.
September 01, 2021 by Mark Filion | News & Events
September's busy conference schedule kicks off next week with the Fall edition of Linaro Virtual Connect. Join us as we look at how to master your PipeWire streams with WirePlumber, and de-mystify GFX virtualization with VirGL!
July 20, 2021 by Alyssa Rosenzweig | News & Events
After a month of reverse-engineering the Arm Mali G78, we’re excited to release documentation on the Valhall instruction set, available as a PDF, as well as a Valhall assembler and disassembler to be used as a reverse-engineering aid.
July 08, 2021 by Gabriel Krisman Bertazi | News & Events
Collabora's team working directly on the Linux kernel is growing. Collaborans continue to expand on their efforts to close the gap between hardware support on vendor trees and mainline.
June 21, 2021 by Shreeya Patel | News & Events
Earlier this month, Collabora took part in the very first KernelCI hackfest, initiated as a joint effort with the Google Chrome OS team. Here's a look at what led to our participation and what was accomplished.
June 21, 2021 by Erica Ryoo | News & Events
Despite the many obstacles brought on by the pandemic, Collabora has continued to grow its teams for the road ahead. Join us in welcoming Kiril, Benjamin, Daniel, Shreeya, Ariel, Nicolas and James!
June 07, 2021 by Alexandros Frantzis | News & Events
We first announced our work on the driver last December, and posted an update earlier this year. We are now happy to announce a second update for this driver, adding several major features which increase its scope and utility.
June 02, 2021 by Marius Vlad | News & Events
Simplifying AGL's existing Wayland-based graphical stack and avoiding the use of modules that aren't maintained upstream has lead to the creation of a new compositor based on libweston, bringing more reliable and fine-grained system control.
May 27, 2021 by Rohan Garg | News & Events
Thanks to a new, low overhead extension in Mesa, OpenGL and Vulkan applications can now talk to each other, bringing more flexibility to application developers while easing the transition path between the industry-standard Khronos® APIs.
May 04, 2021 by Ariel D'Alessandro | News & Events
With their latest contributions all around the kernel, notably to the Video4Linux APIs and hardware enablement, Collaborans continue to expand on their efforts to close the gap between hardware support on vendor trees and mainline.
March 25, 2021 by Boris Brezillon | News & Events
The Panfrost project started as a reverse engineering effort to understand Arm Mali Midgard and Bifrost GPU internals. With the driver getting more and more mature, the natural next step was to work on an Open Source Vulkan driver for those GPUs.
Here are the events we'll be attending in the coming weeks – come say hello!
June 21-24, Austin, Texas
July 17-24, Prizren, Kosovo