News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

Implementing Bluetooth on embedded Linux: Open source BlueZ vs proprietary stacks

February 27, 2025 by George Kiagiadakis  |   Blog

If you are considering deploying BlueZ on your embedded Linux device, the benefits in terms of flexibility, community support, and long-term maintainability make it a worthwhile investment.

Implementing Bluetooth on embedded Linux: Open source BlueZ vs proprietary stacks

12 years of incubating Wayland color management

February 24, 2025 by Pekka Paalanen  |   News & Events

It's been a long road for Wayland's recently landed color management extension. We take a brief look back at how this latest feature was formed.

12 years of incubating Wayland color management

Breaking language barriers: Fine-tuning Whisper for Hindi

February 19, 2025 by Vineet Suryan  |   News & Events

We're proud to announce that Whisper is now available in Hindi! With 2,500 hours of Hindi speech data and innovative techniques like Indic Normalization, this model sets a new benchmark for Hindi ASR.

Breaking language barriers: Fine-tuning Whisper for Hindi

Mesa 25.0: PanVK moves towards production quality

February 04, 2025 by Erik Faye-Lund  |   News & Events

The first release candidate of Mesa 25.0 has recently shipped, bringing with it multiple updates to Panfrost, and most notably to PanVK, the open source Vulkan driver for Arm Mali GPUs.

Mesa 25.0: PanVK moves towards production quality

Welcoming the libsurvive project

January 29, 2025 by Frederic Plourde  |   News & Events

Collabora's involvement in Open Source XR development continues to grow today as we welcome the libsurvive project, the open source lighthouse tracking system, into the fold!

Welcoming the libsurvive project

Kernel 6.13: A flawless end of the year

January 28, 2025 by Sebastian Fricke  |   News & Events

The latest Linux kernel release is here, bringing improvements to the DRM subsystem, further enablement of Rockchip SoCs, a new debugging guide for developers, and more! Here's a recap of Collabora's contributions for 6.13.

Kernel 6.13: A flawless end of the year

MediaTek improvements in Linux 6.13

January 24, 2025 by Sebastian Fricke  |   News & Events

Collabora's deep involvement with the MediaTek community continued to shine this week with the release of Linux 6.13, which saw multiple improvements land for MediaTek SoCs.

MediaTek improvements in Linux 6.13

The state of GFX virtualization using virglrenderer

January 15, 2025 by Gert Wollny  |   Blog

With VirGL, Venus, and vDRM, virglrenderer offers three different approaches to obtain access to accelerated GFX in a virtual machine. Here are the latest updates around each of these approaches.

The state of GFX virtualization using virglrenderer

5 talks for FOSDEM 2025: BlueZ, GStreamer, Open Source AI models & more!

January 07, 2025 by Kara Bembridge  |   News & Events

A testament to its long standing community interest and devote volunteers, FOSDEM will be celebrating its 25th anniversary this year. Join us as we take the stage to discuss BlueZ, GStreamer, Open Source AI models, & more!

5 talks for FOSDEM 2025: BlueZ, GStreamer, Open Source AI models & more!

Upstream support for Rockchip's RK3588: Progress and future plans

December 20, 2024 by Sebastian Reichel  |   News & Events

The Rockchip RK3588 upstream support has progressed a lot over the last few years. As 2024 comes to a close, it is a great time to have a look at the recent changes, work in progress, and the current state in general.

Upstream support for Rockchip's RK3588: Progress and future plans

Faster inference: torch.compile vs TensorRT

December 19, 2024 by Vineet Suryan  |   Blog

In the world of deep learning optimization, two powerful tools stand out: torch.compile, PyTorch’s just-in-time (JIT) compiler, and NVIDIA’s TensorRT, a platform for high-performance deep learning inference.

Faster inference: torch.compile vs TensorRT

Academically inclining at NeurIPS 2024

December 09, 2024 by Kara Bembridge  |   News & Events

Collabora will be at NeurIPs this week to dive into the latest academic findings in machine learning and research advancements that are changing the industry.

Academically inclining at NeurIPS 2024

A look at Vulkan extensions in Venus

October 19, 2022 by Igor Torrente  |   Blog

Venus is a virtual Vulkan driver based on the Virtio-GPU protocol, which defines the serialization of Vulkan commands between guest and host. Here's a closer look at Venus, its components, and their relations in the context of extensions.

A look at Vulkan extensions in Venus

Carlafox, an open-source web-based CARLA visualizer

October 11, 2022 by Vineet Suryan  |   Blog

Taking one step towards democratizing the daunting task of dataset generation by making image synthesis and automatic ground truth data generation maintainable, cheaper, and more repeatable.

Carlafox, an open-source web-based CARLA visualizer

Open source machine learning for video compression

September 14, 2022 by Marcus Edel  |   Blog

Using open source software, Collabora has developed an efficient compression pipeline that enables a face video broadcasting system that achieves the same visual quality as the H.264 standard while only using one-tenth of the bandwidth.

Open source machine learning for video compression

Improving Vulkan graphics state tracking in Mesa

September 07, 2022 by Faith Ekstrand  |   Blog

Introducing new common code for Mesa Vulkan drivers to support a new Vulkan extension, making it easier for app and game authors to manage Vulkan state - and easier for our drivers too.

Improving Vulkan graphics state tracking in Mesa

Using a Raspberry Pi as a Bluetooth speaker with PipeWire

September 02, 2022 by Frederic Danis  |   Blog

Using PipeWire, WirePlumber and a Raspberry Pi, you can create an audio bridge between a Bluetooth® device and an analog speaker system, breathing new life into your old speakers.

Using a Raspberry Pi as a Bluetooth speaker with PipeWire

Introducing the r600/NIR back-end

July 07, 2022 by Gert Wollny  |   Blog

Adventures in NIR-land: the past, the present, and what's lies ahead for the native NIR back-end for Mesa's R600 driver.

Introducing the r600/NIR back-end

Adding secondary command buffers to PanVk

June 15, 2022 by Manas Chaudhary  |   Blog

Getting PanVk, an open source driver for Arm Mali Midgard and Bifrost GPUs, closer to conformancy by implementing one of the core Vulkan features: support for secondary command buffers.

Adding secondary command buffers to PanVk

Bridging the synchronization gap on Linux

June 09, 2022 by Faith Ekstrand  |   Blog

After fighting with the divide between implicit and explicit synchronization with Vulkan on Linux for over seven years, we may finally have some closure. We're not to synchronization nirvana quite yet, but this is an important step along the way.

Bridging the synchronization gap on Linux

Monado's hand tracking: hand-waving our way towards a first attempt

May 31, 2022 by Moses Turner  |   Blog

Optical hand tracking for XR has a bit of a reputation - getting training data, training neural nets, and deploying them in real-time, low-latency environments such as XR is every bit as hard as they say it is.

Monado's hand tracking: hand-waving our way towards a first attempt

Visual-inertial tracking for Monado

April 05, 2022 by Mateo de Mayo  |   Blog

Monado now has initial support for 6DoF ("inside-out") tracking for devices with cameras and an IMU! Three free and open source SLAM/VIO solutions were integrated and adapted to work on XR: Kimera-VIO, ORB-SLAM3, and Basalt.

Visual-inertial tracking for Monado

Spotlight on Meson's full-featured developer environment

March 30, 2022 by Xavier Claessens  |   Blog

When developing an application or a library, it is very common to want to run it without installing it, or to install it into a custom prefix rather than on the system. Here's how Meson can help with that.

Spotlight on Meson's full-featured developer environment

How to write a Vulkan driver in 2022

March 23, 2022 by Faith Ekstrand  |   Blog

An incredible amount has changed in Mesa and in the Vulkan ecosystems since we wrote the first Vulkan driver in Mesa for Intel hardware back in 2015. Not only has Vulkan grown, but Mesa has as well.

How to write a Vulkan driver in 2022

Kernel 5.9: Onwards and upwards

October 22, 2020 by Mylène Josserand  |   News & Events

Collaborans continue to be very active in the Linux kernel, authoring over 150 commits in this release. Here's a look at the improvements, and new features, contributed by our team, notably in hardware support, multimedia, graphics and testing.

Kernel 5.9: Onwards and upwards

Collabora & GStreamer 1.18

October 06, 2020 by Stéphane Cerveau  |   News & Events

A move to GitLab. A switch to the powerful Meson build system. A fast and reliable CI system implemented. The GStreamer community has been busy, bringing a bevy of enhancements to 1.18. Here's a look at the key contributions by Collaborans.

Collabora & GStreamer 1.18

X.Org Developer's Conference 2020

September 15, 2020 by Mark Filion  |   News & Events

The lineup of great virtual conferences continues this week with the 2020 edition of X.Org Developer's Conference (XDC), the leading event for developers working on all things Open graphics, including the Linux kernel, Mesa, DRM, Wayland and X11.

X.Org Developer's Conference 2020

One week, two events: DebConf20 & Linux Plumbers Conference

August 24, 2020 by Mark Filion  |   News & Events

August ends on a high note with two virtual events this week: DebConf20, Debian's annual conference, and Linux Plumbers Conference, the premier event for developers working at all levels of the Linux kernel's plumbing layer and beyond.

One week, two events: DebConf20 & Linux Plumbers Conference

Kernel 5.8: Collabora's biggest & most significant contributions yet!

August 05, 2020 by Dafna Hirschfeld  |   News & Events

The ability for a relatively small software consultancy to contribute at this level demonstrates a fantastic improvement in vendors' mindset when it comes to working Open First and providing mainline support out-of-box as early as possible.

Kernel 5.8: Collabora's biggest & most significant contributions yet!

Lighthouse positional tracking in Monado with libsurvive

July 17, 2020 by Christoph Haag  |   News & Events

HTC Vive (Pro) and Valve Index hardware users can now experiment with positional tracking in Monado, thanks to the implementation of a libsurvive driver using the libsurvive library developed by Charles Lohr, David Berger and many contributors.

Lighthouse positional tracking in Monado with libsurvive

WirePlumber 0.3 released, now ready for the desktop

July 16, 2020 by George Kiagiadakis  |   News & Events

It is with great pleasure that we announce the availability of WirePlumber (the PipeWire session manager) version 0.3.0. This release brings support for desktop use cases and is a working drop-in replacement for PipeWire's example session manager.

WirePlumber 0.3 released, now ready for the desktop

Welcoming five new Collaborans!

July 09, 2020 by Erica Ryoo  |   News & Events

Despite the many obstacles brought on by the pandemic, Collabora continues to build and strengthen its engineering and administration teams for the road ahead. Join us in welcoming Angelica, Raghavendra, Doug, Italo and Theodotos!

Welcoming five new Collaborans!

Monado: Multi-application support with XR_EXTX_overlay

June 30, 2020 by Lubosz Sarnecki  |   News & Events

The recent improvements in Monado like out of process compositing and multi-layer rendering released with v0.2 prepared the requirements to implement OpenXR's XR_EXTX_overlay extension.

Monado: Multi-application support with XR_EXTX_overlay

Embedded Linux & Open Source take the virtual stage

June 18, 2020 by Mark Filion  |   News & Events

Collabora will be presenting on five separate occasions during the virtual editions of Embedded Linux Conference North America and Open Source Summit North America, taking place later this month.

Embedded Linux & Open Source take the virtual stage

Kernel 5.7: Forging ahead, despite COVID-19

June 04, 2020 by Andrzej Pietrasiewicz  |   News & Events

This latest release is the first to contain development work accomplished amid the lockdown measures. Despite these significant changes, Collaborans have also been steadfast in their contributions, with multiple projects progressing.

Kernel 5.7: Forging ahead, despite COVID-19

Google Summer of Code 2020

June 01, 2020 by Mark Filion  |   News & Events

Coding hss begun for this year's Google Summer of Code (GSoC) projects, announced earlier last month. The 2020 edition selected 1,199 students from 66 countries, to work with 199 mentoring organizations over the course of the summer.

Google Summer of Code 2020

Search the newsroom

Upcoming Events

Here are the events we'll be attending in the coming weeks – come say hello!

ICME

June 30-July 4, Nantes, France

 

AGL All Member Meeting

July 9-10, Berlin, Germany

 

DebConf

July 14-20, Brest, France

Featured Video

Open Since 2005 logo

Our website only uses a strictly necessary session cookie provided by our CMS system. To find out more please follow this link.

Collabora Limited © 2005-2025. All rights reserved. Privacy Notice. Sitemap.