News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

NVK enabled for Maxwell, Pascal, and Volta GPUs

April 22, 2025 by Faith Ekstrand  |   News & Events

As of today, NVK is a conformant Vulkan 1.4 implementation for NVIDIA Maxwell, Pascal, and Volta GPUs, and will be enabled by default starting with Mesa 25.1.

NVK enabled for Maxwell, Pascal, and Volta GPUs

Raising the bar for Open Source standards through OpenChain

April 17, 2025 by Eleni Katsoula  |   News & Events

Our commitment to open source extends beyond contributing code. We are dedicated to upholding the highest standards of license compliance throughout our development processes.

Raising the bar for Open Source standards through OpenChain

Embedded week in Nice

April 15, 2025 by Mark Filion  |   News & Events

This May, Embedded Recipes 2025, co-sponsored by Collabora, heads to Nice, France with talks, workshops, and a PipeWire hackfest, all bookended by the Linux Media Summit and the GStreamer Spring Hackfest!

Embedded week in Nice

PanVK is officially Vulkan 1.1 conformant

April 14, 2025 by Erik Faye-Lund  |   News & Events

PanVK has reached a new milestone, and is now officially conformant with the Vulkan 1.1 specification on the Arm Mali-G610 GPU! The submission was done from the Mesa 25.0.2 release, and covers both armhf as well as aarch64 architectures.

PanVK is officially Vulkan 1.1 conformant

A tale of three demos: Breakthroughs in Open Source graphics at Embedded World 2025

April 10, 2025 by Daniel Stone  |   News & Events

Three demos. One stand. From end-to-end HDR and a brand-new SoC running PanVK, to NVK and WebGPU out of the box — discover how Collabora pushed open source graphics forward at Embedded World 2025.

A tale of three demos: Breakthroughs in Open Source graphics at Embedded World 2025

GStreamer 1.26: Improved hardware efficiency, the MPEG-5 LCEVC codec, and more

April 09, 2025 by Olivier Crête  |   News & Events

Collabora once again played a key role in the latest release of GStreamer, contributing enhancements such as improved hardware efficiency, support for the MPEG-5 LCEVC codec, and better integration for analytics and machine learning.

GStreamer 1.26: Improved hardware efficiency, the MPEG-5 LCEVC codec, and more

Kernel 6.14: Enhanced hardware capabilities, improved performance & more!

March 26, 2025 by Cristian Ciocaltea  |   News & Events

The kernel release emphasizes the continuing growth and maturity of the Linux ecosystem and delivers new features, improvements, and optimizations that everyone will be eager to explore. See where Collabora's kernel team contributed to this release.

Kernel 6.14: Enhanced hardware capabilities, improved performance & more!

Hololight joins the OpenXR momentum

March 26, 2025 by Kara Bembridge  |   News & Events

Collabora is thrilled to see its partner, Hololight, join the Khronos Group and become an active member of the OpenXR Working Group. We are excited to support their innovative approach and rapid expansion in the XR streaming space.

Hololight joins the OpenXR momentum

Goodbye Nouveau GL. Hello Zink!

March 11, 2025 by Faith Ekstrand  |   News & Events

Starting with Mesa 25.1, Nouveau users will no longer get the old Nouveau OpenGL driver by default and will instead get Zink+NVK.

Goodbye Nouveau GL. Hello Zink!

MediaTek Genio update: Kernel, Debian 13 images, and KernelCI

March 10, 2025 by Sjoerd Simons  |   News & Events

Towards the end of 2024, MediaTek and Collabora started on a journey to improve upstream support for MediaTek Genio devices. Here's where things stand.

MediaTek Genio update: Kernel, Debian 13 images, and KernelCI

Apertis v2025: the second Bookworm-based release for industrial embedded devices

March 07, 2025 by Dylan Aïssi  |   News & Events

Apertis v2025 has landed with all the updates from Debian 12.9. This release has a variety of updates including new supported boards, improved release processes, and more!

Apertis v2025: the second Bookworm-based release for industrial embedded devices

Embedded World 2025

February 27, 2025 by Mark Filion  |   News & Events

Join us at the NürnbergMesse in Nuremberg, Germany, as we take part in Embedded World 2025, one of the largest trade fairs of its kind, and a global platform for the embedded community!

Embedded World 2025

A look at Vulkan extensions in Venus

October 19, 2022 by Igor Torrente  |   Blog

Venus is a virtual Vulkan driver based on the Virtio-GPU protocol, which defines the serialization of Vulkan commands between guest and host. Here's a closer look at Venus, its components, and their relations in the context of extensions.

A look at Vulkan extensions in Venus

Carlafox, an open-source web-based CARLA visualizer

October 11, 2022 by Vineet Suryan  |   Blog

Taking one step towards democratizing the daunting task of dataset generation by making image synthesis and automatic ground truth data generation maintainable, cheaper, and more repeatable.

Carlafox, an open-source web-based CARLA visualizer

Open source machine learning for video compression

September 14, 2022 by Marcus Edel  |   Blog

Using open source software, Collabora has developed an efficient compression pipeline that enables a face video broadcasting system that achieves the same visual quality as the H.264 standard while only using one-tenth of the bandwidth.

Open source machine learning for video compression

Improving Vulkan graphics state tracking in Mesa

September 07, 2022 by Faith Ekstrand  |   Blog

Introducing new common code for Mesa Vulkan drivers to support a new Vulkan extension, making it easier for app and game authors to manage Vulkan state - and easier for our drivers too.

Improving Vulkan graphics state tracking in Mesa

Using a Raspberry Pi as a Bluetooth speaker with PipeWire

September 02, 2022 by Frederic Danis  |   Blog

Using PipeWire, WirePlumber and a Raspberry Pi, you can create an audio bridge between a Bluetooth® device and an analog speaker system, breathing new life into your old speakers.

Using a Raspberry Pi as a Bluetooth speaker with PipeWire

Introducing the r600/NIR back-end

July 07, 2022 by Gert Wollny  |   Blog

Adventures in NIR-land: the past, the present, and what's lies ahead for the native NIR back-end for Mesa's R600 driver.

Introducing the r600/NIR back-end

Adding secondary command buffers to PanVk

June 15, 2022 by Manas Chaudhary  |   Blog

Getting PanVk, an open source driver for Arm Mali Midgard and Bifrost GPUs, closer to conformancy by implementing one of the core Vulkan features: support for secondary command buffers.

Adding secondary command buffers to PanVk

Bridging the synchronization gap on Linux

June 09, 2022 by Faith Ekstrand  |   Blog

After fighting with the divide between implicit and explicit synchronization with Vulkan on Linux for over seven years, we may finally have some closure. We're not to synchronization nirvana quite yet, but this is an important step along the way.

Bridging the synchronization gap on Linux

Monado's hand tracking: hand-waving our way towards a first attempt

May 31, 2022 by Moses Turner  |   Blog

Optical hand tracking for XR has a bit of a reputation - getting training data, training neural nets, and deploying them in real-time, low-latency environments such as XR is every bit as hard as they say it is.

Monado's hand tracking: hand-waving our way towards a first attempt

Visual-inertial tracking for Monado

April 05, 2022 by Mateo de Mayo  |   Blog

Monado now has initial support for 6DoF ("inside-out") tracking for devices with cameras and an IMU! Three free and open source SLAM/VIO solutions were integrated and adapted to work on XR: Kimera-VIO, ORB-SLAM3, and Basalt.

Visual-inertial tracking for Monado

Spotlight on Meson's full-featured developer environment

March 30, 2022 by Xavier Claessens  |   Blog

When developing an application or a library, it is very common to want to run it without installing it, or to install it into a custom prefix rather than on the system. Here's how Meson can help with that.

Spotlight on Meson's full-featured developer environment

How to write a Vulkan driver in 2022

March 23, 2022 by Faith Ekstrand  |   Blog

An incredible amount has changed in Mesa and in the Vulkan ecosystems since we wrote the first Vulkan driver in Mesa for Intel hardware back in 2015. Not only has Vulkan grown, but Mesa has as well.

How to write a Vulkan driver in 2022

Embedded Linux in Edinburgh

October 18, 2018 by Mark Filion  |   News & Events

Next week, Collabora will be sponsoring, exhibiting & speaking at Embedded Linux Confererence Europe in Edinburgh, Scotland. Now in its 13th year, ELCE is the premier vendor-neutral technical conference for companies and developers using embedded Linux.

Embedded Linux in Edinburgh

Automotive Grade Linux AMM

October 15, 2018 by Mark Filion  |   News & Events

This week, two Collaborans will be in Dresden, Germany to take part in the AGL All Member Meeting. George Kiagiadakis and Daniel Stone will be in attendance, with the former also giving a presentation on the latest happenings in upstream multimedia.

Automotive Grade Linux AMM

FOSSCOMM

October 12, 2018 by Mark Filion  |   News & Events

We're headed to Heraklion, Greece, to meet with the Panhellenic FOSS community at FOSSCOMM, a conference for programmers, students and anyone else interested in the open source movement!

FOSSCOMM

Paris, A Coruna & Berlin

September 20, 2018 by Mark Filion  |   News & Events

Next week, Collaborans will be heading to Paris, A Coruña & Berlin, to sponsor and speak at four different conferences: Embedded Recipes, Kernel Recipes, All Systems Go and XDC 2018. See you there?

Paris, A Coruna & Berlin

Open Source at IBC

September 10, 2018 by Mark Filion  |   News & Events

From September 14 to 18, Collabora will be exhibiting at the IBC Show 2018, the "world's most influential media, entertainment and technology show"! If you are planning on attending, please make sure to stop by our booth, D-15 in Hall 14!

Open Source at IBC

Open Source Summit

August 28, 2018 by Mark Filion  |   News & Events

Starting tomorrow, Collaborans will be in beautiful British Columbia to take part, and speak, in this year's Open Source Summit North America! If you are planning on attending, come say hello or catch one of our presentations!

Open Source Summit

Linux Kernel 4.18

August 13, 2018 by Ezequiel Garcia  |   News & Events

Another two months and a half have passed, Linux Kernel v4.18 has been released, which means it's time to stop along the way and make a little retrospective. This time around, seven Collaborans have contributed to the kernel, authoring 61 commits.

Linux Kernel 4.18

Collabora continues to grow

July 31, 2018 by Jassie Badion  |   News & Events

Comprised of some of the most motivated and active Open Source contributors and maintainers around the world, our team shares a passion for technology and Open Source, as do these newest members. Welcome Gert, Gustavo, Erik, Christoph, Ryan & Ana!

Collabora continues to grow

DebConf18

July 26, 2018 by Mark Filion  |   News & Events

Collabora is heading East to sponsor & attend DebConf18, the annual Debian conference! The week-long event takes place for the first time in Asia, at the National Chiao Tung University Microelectronics & Information Research Center, in Hsinchu Taiwan.

DebConf18

GUADEC 2018

June 29, 2018 by Mark Filion  |   News & Events

By this time next week, Collaborans will have arrived in Almería, Spain, to attend and speak at the 2018 edition of GUADEC, the annual GNOME conference. Come say hello!

GUADEC 2018

Linux Kernel 4.17

June 04, 2018 by Enric Balletbò i Serra  |   News & Events

Linus Torvalds has now released the official Linux 4.17, so it’s time for our traditional blog post summing up our contributions to the latest version of the Linux kernel, which include a number of patches to the DRM subsystem.

Linux Kernel 4.17

foss-north

April 20, 2018 by Mark Filion  |   News & Events

This weekend, we're headed to Gothenburg, Sweden, to meet the Nordic FOSS community at foss-north, a free / open source conference covering both software and hardware from the technical perspective!

foss-north

Search the newsroom

Upcoming Events

Here are the events we'll be attending in the coming weeks – come say hello!

ICME

June 30-July 4, Nantes, France

 

AGL All Member Meeting

July 9-10, Berlin, Germany

 

DebConf

July 14-20, Brest, France

Featured Video

Open Since 2005 logo

Our website only uses a strictly necessary session cookie provided by our CMS system. To find out more please follow this link.

Collabora Limited © 2005-2025. All rights reserved. Privacy Notice. Sitemap.