News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

Implementing Vulkan extensions for NVK

March 10, 2023 by Rebecca McKeever  |   Blog

Since joining the graphics team at Collabora as a Software Engineering Intern last November, I have implemented several Vulkan API extensions for NVK, an open-source Vulkan driver for NVIDIA hardware in Mesa.

Implementing Vulkan extensions for NVK

Connecting at Embedded World 2023

March 09, 2023 by Kara Bembridge  |   News & Events

Nestled in the historic city of Nuremberg, the annual Embedded World conference will be taking place from March 14 to 16. Collabora will be set up in Hall 4, Booth 4-404, with plenty of space to connect and multiple demos to showcase

Connecting at Embedded World 2023

Oxidizing bmap-tools: rewriting a Python project in Rust

March 03, 2023 by Rafael Garcia Ruiz  |   Blog

Rewriting bmaptool in Rust to remove Python dependencies, create statically linked binary, and allow the bmap sparse file format to be used in other Rust projects.

Oxidizing bmap-tools: rewriting a Python project in Rust

Monado's "Mercury" hand tracking now ready for use!

February 24, 2023 by Moses Turner  |   News & Events

Work on this new tracking method started around January 2022. Now, after a little over a year of development, Monado's "Mercury" hand tracking is finally ready for the public to use!

Monado's "Mercury" hand tracking now ready for use!

PanCSF: A new DRM driver for Mali CSF-based GPUs

February 23, 2023 by Boris Brezillon  |   News & Events

A look into the new job-scheduling model with Mali GPUs, their support in the new PanCSF DRM driver, and what it means as the rest of the ecosystem also moves to firmware-assisted scheduling.

PanCSF: A new DRM driver for Mali CSF-based GPUs

Kernel 6.2: More Rust support for drivers

February 21, 2023 by Daniel Almeida  |   News & Events

With more SoC support, a new V4L2 driver and a new dma-buf locking convention among its contributions, Collabora was one of the most active employers for this latest kernel development cycle.

Kernel 6.2: More Rust support for drivers

The futex_waitv() syscall and gaming on Linux

February 17, 2023 by Muhammad Usama Anjum  |   Blog

Just over a year has passed since the futex_waitv() syscall, part of the new futex2 systems calls, landed in Linux 5.16. But why are both needed? What role do they play in the context of gaming on Linux? Let's find out.

The futex_waitv() syscall and gaming on Linux

GStreamer 1.22: Bigger and better!

February 08, 2023 by Olivier Crête  |   News & Events

Improved support for hardware accelerated video decoders, new GTK+ integration for Wayland rendering, and further Meson enhancements to make GStreamer shine on embedded, Collabora's multimedia team made a number of key contributions for this latest release.

GStreamer 1.22: Bigger and better!

Exploring Rust for Vulkan drivers, part 1

February 02, 2023 by Faith Ekstrand  |   Blog

Over the course of the last decade, Rust has emerged as a new programming language for writing safe low-level code. This blog post is the first in a series exploring the area of using Rust to write Mesa Vulkan drivers.

Exploring Rust for Vulkan drivers, part 1

FOSDEM back in full force for 2023

January 20, 2023 by Kara Bembridge  |   News & Events

After two years of hosting the event virtually, Brussels will once again welcome attendees on February 4 & 5 on the old stomping grounds of the ULB Solbosch Campus. Collabora will be presenting 8 different talks, in 7 devrooms as well as on the main track!

FOSDEM back in full force for 2023

Labeling tools are great, but what about quality checks?

January 17, 2023 by Jakub Piotr Cłapa  |   Blog

MLfix is an open-source tool that combines novel unsupervised machine-learning pipelines with a new user interface concept that, together, help annotators and machine-learning engineers identify and filter out label errors.

Labeling tools are great, but what about quality checks?

A brave new world: building glibc with LLVM

January 17, 2023 by Adrian Ratiu  |   Blog

Times are changing: LLVM has become more than a spare to GCC, such that glibc - the last big GCC bastion, is now working towards supporting LLVM as a first-class citizen.

A brave new world: building glibc with LLVM

A look at Vulkan extensions in Venus

October 19, 2022 by Igor Torrente  |   Blog

Venus is a virtual Vulkan driver based on the Virtio-GPU protocol, which defines the serialization of Vulkan commands between guest and host. Here's a closer look at Venus, its components, and their relations in the context of extensions.

A look at Vulkan extensions in Venus

Carlafox, an open-source web-based CARLA visualizer

October 11, 2022 by Vineet Suryan  |   Blog

Taking one step towards democratizing the daunting task of dataset generation by making image synthesis and automatic ground truth data generation maintainable, cheaper, and more repeatable.

Carlafox, an open-source web-based CARLA visualizer

Open source machine learning for video compression

September 14, 2022 by Marcus Edel  |   Blog

Using open source software, Collabora has developed an efficient compression pipeline that enables a face video broadcasting system that achieves the same visual quality as the H.264 standard while only using one-tenth of the bandwidth.

Open source machine learning for video compression

Improving Vulkan graphics state tracking in Mesa

September 07, 2022 by Faith Ekstrand  |   Blog

Introducing new common code for Mesa Vulkan drivers to support a new Vulkan extension, making it easier for app and game authors to manage Vulkan state - and easier for our drivers too.

Improving Vulkan graphics state tracking in Mesa

Using a Raspberry Pi as a Bluetooth speaker with PipeWire

September 02, 2022 by Frederic Danis  |   Blog

Using PipeWire, WirePlumber and a Raspberry Pi, you can create an audio bridge between a Bluetooth® device and an analog speaker system, breathing new life into your old speakers.

Using a Raspberry Pi as a Bluetooth speaker with PipeWire

Introducing the r600/NIR back-end

July 07, 2022 by Gert Wollny  |   Blog

Adventures in NIR-land: the past, the present, and what's lies ahead for the native NIR back-end for Mesa's R600 driver.

Introducing the r600/NIR back-end

Adding secondary command buffers to PanVk

June 15, 2022 by Manas Chaudhary  |   Blog

Getting PanVk, an open source driver for Arm Mali Midgard and Bifrost GPUs, closer to conformancy by implementing one of the core Vulkan features: support for secondary command buffers.

Adding secondary command buffers to PanVk

Bridging the synchronization gap on Linux

June 09, 2022 by Faith Ekstrand  |   Blog

After fighting with the divide between implicit and explicit synchronization with Vulkan on Linux for over seven years, we may finally have some closure. We're not to synchronization nirvana quite yet, but this is an important step along the way.

Bridging the synchronization gap on Linux

Monado's hand tracking: hand-waving our way towards a first attempt

May 31, 2022 by Moses Turner  |   Blog

Optical hand tracking for XR has a bit of a reputation - getting training data, training neural nets, and deploying them in real-time, low-latency environments such as XR is every bit as hard as they say it is.

Monado's hand tracking: hand-waving our way towards a first attempt

Visual-inertial tracking for Monado

April 05, 2022 by Mateo de Mayo  |   Blog

Monado now has initial support for 6DoF ("inside-out") tracking for devices with cameras and an IMU! Three free and open source SLAM/VIO solutions were integrated and adapted to work on XR: Kimera-VIO, ORB-SLAM3, and Basalt.

Visual-inertial tracking for Monado

Spotlight on Meson's full-featured developer environment

March 30, 2022 by Xavier Claessens  |   Blog

When developing an application or a library, it is very common to want to run it without installing it, or to install it into a custom prefix rather than on the system. Here's how Meson can help with that.

Spotlight on Meson's full-featured developer environment

How to write a Vulkan driver in 2022

March 23, 2022 by Faith Ekstrand  |   Blog

An incredible amount has changed in Mesa and in the Vulkan ecosystems since we wrote the first Vulkan driver in Mesa for Intel hardware back in 2015. Not only has Vulkan grown, but Mesa has as well.

How to write a Vulkan driver in 2022

Zink brings conformant OpenGL on Imagination GPUs

July 06, 2023 by Erik Faye-Lund  |   News & Events

Today, Imagination Technologies announced they are now using Zink for full OpenGL 4.6 support. This is the first time we've seen a hardware vendor trust Zink enough to completely side-step a native OpenGL driver and use it in a shipping product.

Zink brings conformant OpenGL on Imagination GPUs

Kernel 6.4: More work on MediaTek, Rockchip, and power supply

July 05, 2023 by Rogerio Alves Cardoso  |   News & Events

Released last week, Linux kernel 6.4 brings new features such as support for Intel LAM, user events for tracing, and the ability for the machine keyrings used for Machine Owner Keys to store only CA-enforced keys.

Kernel 6.4: More work on MediaTek, Rockchip, and power supply

NVK update: Enabling new extensions, conformance status & more

June 26, 2023 by Faith Ekstrand  |   News & Events

Looking back, it's amazing how much has happened in NVK in just the last 7 months. If development continues at this crazy pace, we may be looking at a pretty decent driver before too much longer.

NVK update: Enabling new extensions, conformance status & more

Ready to embark for Embedded Open Source Summit

June 22, 2023 by Kara Bembridge  |   News & Events

Taking place at the Prague Congress Centre from June 27 to 30, this new 4-day umbrella event brings multiple conferences, including Automotive Linux Summit (ALS) and Embedded Linux Conference (ELC), all under one roof.

Ready to embark for Embedded Open Source Summit

Making new strides at AWE

May 29, 2023 by Kara Bembridge  |   News & Events

Set in the heart of Silicon Valley, XR enthusiasts are eagerly awaiting to see the latest advancements on display at Augmented World Expo (AWE) 2023.

Making new strides at AWE

Weston 12.0: Highlights and changes for Wayland's reference compositor

May 25, 2023 by Marius Vlad  |   News & Events

Released last week, Weston 12.0 brings a number of highlights including two new backends, support for multiple scanout devices, and the addition of new protocol implementations. Here's a look at some of the changes that have landed in this new version.

Weston 12.0: Highlights and changes for Wayland's reference compositor

Kernel 6.3: MediaTek, Rockchip RK3588 & more

April 25, 2023 by Muhammad Usama Anjum  |   News & Events

Released earlier this week, Linux Kernel 6.3 brings thousands of new lines of code to improve the core kernel, architectural support, networking and filesystems.

Kernel 6.3: MediaTek, Rockchip RK3588 & more

April brings tech events aplenty

April 20, 2023 by Kara Bembridge  |   News & Events

Spring is in bloom in the northern hemisphere, and with it comes three tech events we'll be attending - PyCon US, Shell & Display Next Hackfest, and Linaro Connect!

April brings tech events aplenty

Moving forward with more hands on deck

March 27, 2023 by Kara Bembridge  |   News & Events

It’s no secret that Tech has faced some setbacks lately, namely on the headcount front. Despite these uncertainties, Collabora has had the privilege of increasing our roster with new teammates.

Moving forward with more hands on deck

Monado accepted for XROS 2023!

March 14, 2023 by Frédéric Plourde  |   News & Events

We're proud to announce that Monado, the free and open source XR platform, has been accepted as a mentoring organization for XROS, the XR Open Source Fellowship Program.

Monado accepted for XROS 2023!

Showcasing the STM32MP1 at Embedded World

March 13, 2023 by Mark Filion  |   News & Events

As a recent new member of STMicroelectronics' Partner Program, we're excited to be showcasing the STM32MP1 at Embedded World this week, our first demo featuring the STM32 platform.

Showcasing the STM32MP1 at Embedded World

Connecting at Embedded World 2023

March 09, 2023 by Kara Bembridge  |   News & Events

Nestled in the historic city of Nuremberg, the annual Embedded World conference will be taking place from March 14 to 16. Collabora will be set up in Hall 4, Booth 4-404, with plenty of space to connect and multiple demos to showcase

Connecting at Embedded World 2023

Search the newsroom

Upcoming Events

Here are the events we'll be attending in the coming weeks – come say hello!

ISC High Performance

June 10-13, Hamburg, Germany

 

Augmented World Expo

June 10-12, Long Beach, USA

 

InfoComm

June 11-13, Orlando, USA

 

ICME

June 30-July 4, Nantes, France

 

Featured Video

Open Since 2005 logo

Our website only uses a strictly necessary session cookie provided by our CMS system. To find out more please follow this link.

Collabora Limited © 2005-2025. All rights reserved. Privacy Notice. Sitemap.