July 31, 2023 by Eugen Hristev | Blog
I have been working on getting U-boot upstream up to speed for the Radxa Rock-5B Rockchip RK3588 board. One of the cool features that I recently published upstream is the ability to boot the board without any kind of non-volatile media (NVM) used.
July 27, 2023 by Mark Filion | News & Events
If you weren't able to attend Embedded Open Source Summit in Prague last month, you're in luck as all presentations were recorded and are now available on YouTube.
July 26, 2023 by Kara Bembridge | News & Events
After months of work, led by Collabora's own Faith Ekstrand, Red Hat's Karol Herbst, and numerous open source contributors, NVK is now considered ready to be merged into the main Mesa project.
July 20, 2023 by Daniel Stone | News & Events
Collabora continues to relentlessly shift the needle to make high-quality open-source software not just an aspiration, but an expectation. We're pleased to announce an extension of our collaboration with Arm, providing more surety and capability for Panfrost.
July 18, 2023 by Eugen Hristev | Blog
I previously talked about getting the bigger brother Rock 5B into mainline U-boot; this time I worked on the Rock 5A, an even tinier SBC based on Rockchip's RK3588S SoC that is one step closer to getting accepted.
July 13, 2023 by Kara Bembridge | News & Events
With Black Valley in Norway, and Akademy in Greece, this weekend's plans are all set or computer enthusiasts! Collabora is proud to sponsor both of these events as a chance for communities to come together and strengthen their bonds.
July 06, 2023 by Erik Faye-Lund | News & Events
Today, Imagination Technologies announced they are now using Zink for full OpenGL 4.6 support. This is the first time we've seen a hardware vendor trust Zink enough to completely side-step a native OpenGL driver and use it in a shipping product.
July 05, 2023 by Rogerio Alves Cardoso | News & Events
Released last week, Linux kernel 6.4 brings new features such as support for Intel LAM, user events for tracing, and the ability for the machine keyrings used for Machine Owner Keys to store only CA-enforced keys.
June 26, 2023 by Faith Ekstrand | News & Events
Looking back, it's amazing how much has happened in NVK in just the last 7 months. If development continues at this crazy pace, we may be looking at a pretty decent driver before too much longer.
June 22, 2023 by Kara Bembridge | News & Events
Taking place at the Prague Congress Centre from June 27 to 30, this new 4-day umbrella event brings multiple conferences, including Automotive Linux Summit (ALS) and Embedded Linux Conference (ELC), all under one roof.
June 20, 2023 by Daniel Almeida | Blog
Powered by Rust, the video codec stack on ARCVM is now bringing faster and more reliable video decoding on Chrome OS. Here's how Collabora has been helping shape video virtualization for Chromebooks, and what it means for end users.
June 15, 2023 by Ashok Sidipotu | Blog
Event Dispatcher, part of the upcoming WirePlumber 0.5 release, is a custom PipeWire event scheduling mechanism designed to address many of the fundamental issues in WirePlumber.
September 02, 2022 by Frederic Danis | Blog
Using PipeWire, WirePlumber and a Raspberry Pi, you can create an audio bridge between a Bluetooth® device and an analog speaker system, breathing new life into your old speakers.
July 07, 2022 by Gert Wollny | Blog
Adventures in NIR-land: the past, the present, and what's lies ahead for the native NIR back-end for Mesa's R600 driver.
June 15, 2022 by Manas Chaudhary | Blog
Getting PanVk, an open source driver for Arm Mali Midgard and Bifrost GPUs, closer to conformancy by implementing one of the core Vulkan features: support for secondary command buffers.
June 09, 2022 by Faith Ekstrand | Blog
After fighting with the divide between implicit and explicit synchronization with Vulkan on Linux for over seven years, we may finally have some closure. We're not to synchronization nirvana quite yet, but this is an important step along the way.
May 31, 2022 by Moses Turner | Blog
Optical hand tracking for XR has a bit of a reputation - getting training data, training neural nets, and deploying them in real-time, low-latency environments such as XR is every bit as hard as they say it is.
April 05, 2022 by Mateo de Mayo | Blog
Monado now has initial support for 6DoF ("inside-out") tracking for devices with cameras and an IMU! Three free and open source SLAM/VIO solutions were integrated and adapted to work on XR: Kimera-VIO, ORB-SLAM3, and Basalt.
March 30, 2022 by Xavier Claessens | Blog
When developing an application or a library, it is very common to want to run it without installing it, or to install it into a custom prefix rather than on the system. Here's how Meson can help with that.
March 23, 2022 by Faith Ekstrand | Blog
An incredible amount has changed in Mesa and in the Vulkan ecosystems since we wrote the first Vulkan driver in Mesa for Intel hardware back in 2015. Not only has Vulkan grown, but Mesa has as well.
March 14, 2022 by Gabriel Krisman Bertazi | Blog
Every file system used in production has tools to try to recover from system crashes. To provide a better infrastructure for those tools, our kernel team developed FAN_FS_ERROR, a new fanotify event which monitors error notifications.
March 08, 2022 by George Kiagiadakis | Blog
The PipeWire project made major strides over the past few years, bringing shiny new features, and paving the way for new possibilities in the Linux multimedia scene. A look what was accomplished in 2021, and what lies ahead for 2022.
February 08, 2022 by André Almeida | Blog
Over the past 18 months, we have been on a roller-coaster ride developing futex2, a new set of system calls. As part of this effort, the futex_waitv() syscall has now landed in Linux 5.16. But what exactly is futex?
January 27, 2022 by Alyssa Rosenzweig | Blog
Until now, no Valhall devices (Mali-G57, Mali-G78) ran mainline Linux - whilst this made driver development obviously difficult, there’s no better time to write drivers than before the devices even get into the hands of end users.
May 09, 2019 by André Almeida | News & Events
Earlier this week, Linux Kernel 5.1 was released, and with it came over 13,000 commits from developers all around the world, including Collaborans. This time around, no less than 12 different developers contributed commits (64), sign-offs (111) & more.
May 06, 2019 by Aaron Boxer | News & Events
After a year-long development cycle, the much anticipated release was made available recently. With it came a number of exciting new features we're especially proud of, including per-element latency tracer and support for planar or non-interleaved audio.
April 09, 2019 by Nicolas Dufresne | News & Events
Collabora contributes elements implementing the RIST Simple Profile to GStreamer. This specification adds retransmissions to RTP streams in a way that it compatible with existing broadcast encoders and decoders.
March 29, 2019 by Mark Filion | News & Events
Next week, Collaborans will be in Bangkok, Thailand, to participate in the 25th edition of Linaro Connect, a gathering of the world's leading open source engineers working on Arm. Tomeu Vizoso and Gustavo Padovan will be in attendance to present Panfrost.
March 18, 2019 by Jakob Bornecrantz | News & Events
Following the release of the OpenXR 0.90 Provisional Specification by The Khronos Group, Collabora is proud to announce Monado, an open source implementation of the newly released OpenXR spec.
March 13, 2019 by Mark Filion | News & Events
Tomorrow, March 14, Collabora will be in Düsseldorf, Germany, to take part and exhibit at the second edition of the Renesas European R-Car Consortium Forum!
March 06, 2019 by Gaël Portay | News & Events
The first major release of Linux for the year 2019 was made available earlier this week, and with it came a new version number: 5.0. Here's a look at contributions made by Collaborans!
March 04, 2019 by Mark Filion | News & Events
Collaborans are in Tokyo this week to take part in the AGL All Member Meeting. They'll be discussing the future of IVI Window Management, and also look at the latest upstream work around the PipeWire framework and how it can benefit the automotive industry.
February 20, 2019 by Mark Filion | News & Events
Collabora is headed to Nuremberg, Germany to take part in this year's edition of Embedded World, the leading international fair for embedded systems! Come say hello, booth 4-280!
January 23, 2019 by Mark Filion | News & Events
In just over a week's time, Collabora will be heading to Brussels to take part in the 2019 edition of FOSDEM! Come say hello, or catch one of the 8 talks (in 5 different devrooms) given by Collaborans!
January 07, 2019 by Fabien Lahoudere | News & Events
A few weeks ago, in the final days leading up to Christmas, Linus Torvalds released Linux Kernel 4.20. Collaborans were once again active during this development cycle, contributing 22 patches, 112 reviews & 55 sign-offs. Here's a look at their contributions.
December 20, 2018 by Mark Filion | News & Events
As one year ends and another begins, Collabora is proud to be once again an Includer sponsor for the latest round (#17) of Outreachy internships, which began earlier this month! More specifically, Collabora is sponsoring the Linux kernel projects for…
Here are the events we'll be attending in the coming weeks – come say hello!
May 8-9, Stuttgart, Germany
May 12-14, Seoul, South Korea
May 13, Nice, France
May 14-16, Nice, France
May 16-18, Nice, France
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português