June 15, 2023 by Ashok Sidipotu | Blog
Event Dispatcher, part of the upcoming WirePlumber 0.5 release, is a custom PipeWire event scheduling mechanism designed to address many of the fundamental issues in WirePlumber.
June 08, 2023 by Vineet Suryan | Blog
Contrary to traditional software development, data is more important than code in machine learning. Building a high-performing model requires using reliable, precisely labelled data but poor-quality data is not always obvious.
May 31, 2023 by Eugen Hristev | Blog
A while back I presented USB 2.0 host support that was added to U-boot for the Radxa Rock-5B RK3588 Rockchip board. This time, USB 3.0 was added with support for the host and gadget.
May 29, 2023 by Kara Bembridge | News & Events
Set in the heart of Silicon Valley, XR enthusiasts are eagerly awaiting to see the latest advancements on display at Augmented World Expo (AWE) 2023.
May 25, 2023 by Marius Vlad | News & Events
Released last week, Weston 12.0 brings a number of highlights including two new backends, support for multiple scanout devices, and the addition of new protocol implementations. Here's a look at some of the changes that have landed in this new version.
May 18, 2023 by Eugen Hristev | Blog
Work continues on the Radxa ROCK5B RK388, as PCIe and RTL8125B networking support in U-boot have now been added. Publishing code as Open Source can benefit many different other projects, and allows anyone to benefit.
May 03, 2023 by Rebecca Mckeever | Blog
NVK, an open-source Vulkan driver for NVIDIA hardware that is part of Mesa, now supports the Vulkan extension VK_KHR_multiview.
April 27, 2023 by Eugen Hristev | Blog
The beauty of Open Source is that we can reuse code written by many other people, keep their authorship, and credit them for their work, without needing to reinvent anything!
April 25, 2023 by Muhammad Usama Anjum | News & Events
Released earlier this week, Linux Kernel 6.3 brings thousands of new lines of code to improve the core kernel, architectural support, networking and filesystems.
April 20, 2023 by Kara Bembridge | News & Events
Spring is in bloom in the northern hemisphere, and with it comes three tech events we'll be attending - PyCon US, Shell & Display Next Hackfest, and Linaro Connect!
April 18, 2023 by Xavier Claessens | Blog
Want to develop your Meson project in a modern IDE? Make sure to install Meson VSCode extension which is now fully functional with the recent release of Meson 1.1.0!
April 05, 2023 by Vineet Suryan | Blog
Labeling errors are common in present open-source 3D perception datasets, which could have impactful consequences. To tackle this issue, we used Carlafox to automatically generate an error-free synthetic dataset for 3D perception.
December 02, 2022 by Deborah Brouwer | Blog
Earlier this year, I joined Collabora for a six-month internship to learn how V4L2 (Video4Linux2) supports stateless video hardware decoding, and build a utility that traced and replayed stateless decoding from a userspace perspective.
October 27, 2022 by Ashok Sidipotu | Blog
With the upcoming 0.5 release, WirePlumber's configuration system will be moving to a JSON syntax to define settings, bringing a more unified configuration approach across the PipeWire ecosystem.
October 19, 2022 by Igor Torrente | Blog
Venus is a virtual Vulkan driver based on the Virtio-GPU protocol, which defines the serialization of Vulkan commands between guest and host. Here's a closer look at Venus, its components, and their relations in the context of extensions.
October 11, 2022 by Vineet Suryan | Blog
Taking one step towards democratizing the daunting task of dataset generation by making image synthesis and automatic ground truth data generation maintainable, cheaper, and more repeatable.
September 14, 2022 by Marcus Edel | Blog
Using open source software, Collabora has developed an efficient compression pipeline that enables a face video broadcasting system that achieves the same visual quality as the H.264 standard while only using one-tenth of the bandwidth.
September 07, 2022 by Faith Ekstrand | Blog
Introducing new common code for Mesa Vulkan drivers to support a new Vulkan extension, making it easier for app and game authors to manage Vulkan state - and easier for our drivers too.
September 02, 2022 by Frederic Danis | Blog
Using PipeWire, WirePlumber and a Raspberry Pi, you can create an audio bridge between a Bluetooth® device and an analog speaker system, breathing new life into your old speakers.
July 07, 2022 by Gert Wollny | Blog
Adventures in NIR-land: the past, the present, and what's lies ahead for the native NIR back-end for Mesa's R600 driver.
June 15, 2022 by Manas Chaudhary | Blog
Getting PanVk, an open source driver for Arm Mali Midgard and Bifrost GPUs, closer to conformancy by implementing one of the core Vulkan features: support for secondary command buffers.
June 09, 2022 by Faith Ekstrand | Blog
After fighting with the divide between implicit and explicit synchronization with Vulkan on Linux for over seven years, we may finally have some closure. We're not to synchronization nirvana quite yet, but this is an important step along the way.
May 31, 2022 by Moses Turner | Blog
Optical hand tracking for XR has a bit of a reputation - getting training data, training neural nets, and deploying them in real-time, low-latency environments such as XR is every bit as hard as they say it is.
April 05, 2022 by Mateo de Mayo | Blog
Monado now has initial support for 6DoF ("inside-out") tracking for devices with cameras and an IMU! Three free and open source SLAM/VIO solutions were integrated and adapted to work on XR: Kimera-VIO, ORB-SLAM3, and Basalt.
August 14, 2015 by Guy Lunardi | News and Events
Montpellier, France - from 14/08/2015 to 16/08/2015: GStreamer developers are meeting up to work on the project.
March 20, 2015 by Guy Lunardi | News and Events
Orlando, USA - from 17/06/2015 to 19/06/2015: we'll be exhibiting at InfoComm 2015, the largest event for professional AV in the world. Collabora booth 5469
March 18, 2015 by Guy Lunardi | News and Events
Stuttgart, Germany - From 22/04/2015 to 22/04/2015: We will be exhibiting at the GENIVI Demonstration Showcase during the All Member Meeting.
January 15, 2015 by Guy Lunardi | News and Events
Amsterdam, The Netherlands February 10-12, 2015: the world’s largest tradeshow dedicated to professional AV and electronic systems integration. Collabora booth #11-E61
December 17, 2014 by Guy Lunardi | News and Events
Las Vegas, USA - January 6th - 9th, 2015: Collabora will be participating with key partners at CES 2015, the world’s gathering place for all who thrive on the business of consumer technologies.
December 16, 2014 by Guy Lunardi | News and Events
Cambridge, UK January 25-29, 2015: Hosted at Collabora's UK headquarters, the Event Developer Hackfest 2015 aims to continue the tradition of pushing forward roadmaps for the toolkit and developer experience.
November 24, 2014 by Guy Lunardi | News and Events
A Coruña, Spain - December 7-10, 2014: Collabora are pleased to be sponsoring and attending the upcoming Web Engines Hackfest, which will bring together members from all parts of the Web Platform community.
October 21, 2014 by Guy Lunardi | News and Events
Software engineering, quality assurance, project management, and Finance are all looking for great and talented people. Please check us out. https://www.collabora.com/about-us/careers.html
September 29, 2014 by Guy Lunardi | News and Events
Düsseldorf, Germany October 16-17, 2014: the GStreamer Conference is a conference for developers, decision-makers, community members, industry partners, and anyone else interested in the GStreamer multimedia framework or Open Source and cross-platform…
August 13, 2014 by Guy Lunardi | News and Events
Amsterdam, The Netherlands September 12-16, 2014: the essential global meeting place for everyone engaged in creating, managing and delivering the future of electronic media and entertainment technology and content. Collabora booth #8.B38c
August 11, 2014 by Guy Lunardi | News and Events
Vancouver, Canada August 12-14, 2014: SIGGRAPH, visit ARM at Booth #933 in the Mobile Pavilion to meet with Collabora. SIGGRAPH attracts 20,000 international attendees from across the globe and many creative and technical disciplines. It is the only…
August 05, 2014 by Guy Lunardi | News and Events
Cambridge, England August 5-8, 2014: With so many silicon vendors and OEMs visiting Cambridge England, August 5-8 transforms the univeristy town into the world's center of innovation for one week. Cambridge in August attracts international leaders in…
Here are the events we'll be attending in the coming weeks – come say hello!
October 7-10, Montreal, Quebec
October 9-11, Montreal, Quebec
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português