October 12, 2018 by Zeeshan Ali | Blog
After I started working for Collabora in April, I've finally been able to put some time on maintenance and development of Geoclue again. While I've fixed quite a few issues on the backlog, there has been some significant changes as of late.
October 12, 2018 by Mark Filion | News & Events
We're headed to Heraklion, Greece, to meet with the Panhellenic FOSS community at FOSSCOMM, a conference for programmers, students and anyone else interested in the open source movement!
October 10, 2018 by Martyn Welch | Blog
Like all software, Open Source software isn't without it's bugs and issues. However, thanks to the nature of Open Source, resolving or mitigating the issue you encountered can be quite the satisfying adventure when it comes to scratching the itch.
October 02, 2018 by Lucas Kanashiro | Blog
Last month, the first "MicroDebConf" took place at the Gama campus of the University of Brasilia. Here's a look at how this one day event came to be, and what was accomplished during that day.
September 20, 2018 by Mark Filion | News & Events
Next week, Collaborans will be heading to Paris, A Coruña & Berlin, to sponsor and speak at four different conferences: Embedded Recipes, Kernel Recipes, All Systems Go and XDC 2018. See you there?
September 18, 2018 by Ezequiel Garcia | Blog
When working on the Linux Kernel, testing via QEMU is pretty common. Here's a look at virtme, a QEMU wrapper that uses the host instead of a virtual disk, making working with QEMU extremely easy.
September 10, 2018 by Mark Filion | News & Events
From September 14 to 18, Collabora will be exhibiting at the IBC Show 2018, the "world's most influential media, entertainment and technology show"! If you are planning on attending, please make sure to stop by our booth, D-15 in Hall 14!
August 30, 2018 by Maxime Buquet | Blog
Earlier this month, Collabora sponsored & hosted the XMMP Sprint, the first developer event in the XMPP community in a long time. Here's a look at what was accomplished over the weekend, and what's next for this open standard.
August 29, 2018 by Guillaume Tucker | Blog
In addition to Collabora's work to add support in mainline Linux kernel for several Chromebooks, these platforms are now being continuously tested as part of kernelci.org. Here's how to set them up for kernel development & automated testing with LAVA.
August 28, 2018 by Mark Filion | News & Events
Starting tomorrow, Collaborans will be in beautiful British Columbia to take part, and speak, in this year's Open Source Summit North America! If you are planning on attending, come say hello or catch one of our presentations!
August 27, 2018 by Robert Foss | Blog
Working with a git based project that has a defacto upstream repository means that you perioducally want to fetch the canonical master branch. This can be simplified with a .gitconfig alias.
August 21, 2018 by Emil Velikov | Blog
A look at the work and motivation behind implementing the Khronos EGLDevice extensions in Mesa. These extensions allow users of open source graphics drivers to cleanly describe & select which device to use in heterogeneous systems.
June 15, 2021 by Nícolas F. R. A. Prado | Blog
Initiated as a joint effort by the Google Chrome OS team and Collabora, the recent KernelCI hackfest brought the addition of new tests including the ability to detect regressions on the Linux kernel that can directly affect cameras.
June 14, 2021 by Erik Faye-Lund | Blog
There's a lot that has happened in the world of Zink since my last update, so let's see if I can bring you up to date on the most important stuff, including upstream development, support for OpenGL 4.6 & GLES 3.1, and more.
June 11, 2021 by Alyssa Rosenzweig | Blog
Panfrost, the open source driver for Arm Mali, now supports OpenGL ES 3.1 on both Midgard (Mali T760 and newer) and Bifrost (Mali G31, G52, G72) GPUs, adding a number of features, notably including compute shaders.
May 17, 2021 by Gert Wollny | Blog
Collabora has been investing into Perfetto to enable driver authors & users to get deep insights into driver internals and GPU performance. Here's how we applied this work to study workloads on the virtualized VirGL implementation.
May 11, 2021 by Emil Velikov | Blog
The Hantro Video4Linux2 (V4L2) kernel module has gained support for another SoC! The Microchip SAMA5D4 features a single decode unit supporting MPEG2, VP8 and H.264 streams, alongside the built-in post-processing unit.
May 05, 2021 by Frederic Danis | Blog
DKMS is a framework that is mostly used to build and install external kernel modules. It can also be used to install a specific patch to the modules of the current kernel, such as applying a specific fix to the Bluetooth USB subsystem.
April 29, 2021 by Xavier Claessens | Blog
Building GTK 4 as a Meson subproject for your own application is not only useful for Windows builds, but also for many Linux distributions that do not yet package a recent enough version of GTK 4 and/or its dependencies.
April 22, 2021 by Antonio Caggiano | Blog
Recently, we have been using Perfetto to successfully profile Apitrace traces in crosvm through VirGL renderer. We have now added perfetto instrumentation to VirGL renderer, Mesa, and Apitrace to see what happens precisely in a frame.
April 20, 2021 by Marcus Edel | Blog
As part of a project backed by INVEST-AI, a program managed by IVADO Labs, we have developed a multi-stage neural network-based solution that accurately locates and tracks the hands despite complex background noise and occlusion between hands.
April 13, 2021 by Andrzej Pietrasiewicz | Blog
Did you know you could run a permissively-licensed MTP implementation with minimal dependencies on an embedded device? Here's a step-by-step guide on how to easily run cmtp-responder on a Rock Pi 4 or any other board equipped with a UDC.
March 24, 2021 by Guillaume Desmottes | Blog
Earlier this year, the Rust compiler gained support for LLVM source-base code coverage. In this post we'll explain how to setup a CI job in a Rust project to feed source-base coverage information to GitLab.
March 18, 2021 by Xavier Claessens | Blog
Over the past few months, I've been working on a side project to improve Meson sub-project support. The best stress test is to build projects on Windows, without msys2, because it has no dependencies or tools installed (e.g. pkg-config).
August 30, 2022 by Frédéric Plourde | News & Events
Be part of the FOSSXR lineup by submitting your talk by September 5th, 2022. That means there's one week left for all you AR and VR enthusiasts and industry movers to share your exciting XR projects/news/demos with the world.
August 16, 2022 by Kara Bembridge | News & Events
A magnet for open source supporters, the very first edition of Open Source Summit Latin America is opening its virtual doors. This new annual conference takes place online from August 23 to 24 with 5 talks from Collabora's very own!
August 02, 2022 by Cristian Ciocaltea | News & Events
As usual, there are quite a few changes merged into the mainline kernel. Let's take a look at some of the contributions by Collabora's kernel team!
July 05, 2022 by Marius Vlad | News & Events
The latest release of Weston was made on February 1, 2022. Meanwhile, a few bugs were discovered and we decided to do a bug-fix release, which we haven't had in several years.
June 21, 2022 by Kara Bembridge | News & Events
Part steadfast approach - part welcoming spirirt; Collabora continues to successfully expand with new talent amply on deck. Well ahead of the remote work curve, our new joiners have settled into their roles from their respective corners of the planet.
June 16, 2022 by Kara Bembridge | News & Events
Big events draw in an array of individuals to learn and connect, and the Open Source Summit North America is no exception. Jam-packed with sessions to uncover from June 21 to 24, this year's event features three talks by Collabora's very own!
June 06, 2022 by Alyssa Rosenzweig | News & Events
Mali-G57 features in new MediaTek Chromebooks with the MT8192 and MT8195 system-on-chips. With Mesa 22.2 and an appropriate kernel, accelerated graphics will work out of the box on Linux on these laptops.
June 02, 2022 by Dmitry Osipenko | News & Events
Released by Linus Torvalds on May 22 after a busy two-month development cycle, Linux kernel 5.18 brings new features and lights up new hardware. Let's take a look at the contributions made by our engineering team.
May 26, 2022 by Kara Bembridge | News & Events
After a two-year hiatus, the City of Lights is shinning brightly again to welcome the community for a full week of engaging talks at Embedded Recipes and Kernel Recipes conferences.
May 17, 2022 by Kara Bembridge | News & Events
Less than a day away, May 18th looks to be a very busy time. With Live Embedded Event and Embedded Vision Summit taking place almost simultaneously, Collabora will be presenting four different talks!
April 29, 2022 by Frederic Danis | News & Events
Over the last two years, Bluetooth® audio support has steadily grown in PipeWire and has become a featureful, stable, conformant, open source Bluetooth® audio stack implementation. Here's a look at where things stand.
April 27, 2022 by Jakub Piotr Cłapa | News & Events
Looking to use hardware-backed and virtual SocketCAN interfaces inside your Kubernetes Pods? A new device plugin now allows processes inside a pod to communicate with each other using the full Linux SocketCAN API.
Here are the events we'll be attending in the coming weeks – come say hello!
March 8-9, Berlin, Germany
March 14-16, Nuremberg, Germany
April 24-26, Brno, Czech Republic
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português