October 10, 2018 by Martyn Welch | Blog
Like all software, Open Source software isn't without it's bugs and issues. However, thanks to the nature of Open Source, resolving or mitigating the issue you encountered can be quite the satisfying adventure when it comes to scratching the itch.
October 02, 2018 by Lucas Kanashiro | Blog
Last month, the first "MicroDebConf" took place at the Gama campus of the University of Brasilia. Here's a look at how this one day event came to be, and what was accomplished during that day.
September 20, 2018 by Mark Filion | News & Events
Next week, Collaborans will be heading to Paris, A Coruña & Berlin, to sponsor and speak at four different conferences: Embedded Recipes, Kernel Recipes, All Systems Go and XDC 2018. See you there?
September 18, 2018 by Ezequiel Garcia | Blog
When working on the Linux Kernel, testing via QEMU is pretty common. Here's a look at virtme, a QEMU wrapper that uses the host instead of a virtual disk, making working with QEMU extremely easy.
September 10, 2018 by Mark Filion | News & Events
From September 14 to 18, Collabora will be exhibiting at the IBC Show 2018, the "world's most influential media, entertainment and technology show"! If you are planning on attending, please make sure to stop by our booth, D-15 in Hall 14!
August 30, 2018 by Maxime Buquet | Blog
Earlier this month, Collabora sponsored & hosted the XMMP Sprint, the first developer event in the XMPP community in a long time. Here's a look at what was accomplished over the weekend, and what's next for this open standard.
August 29, 2018 by Guillaume Tucker | Blog
In addition to Collabora's work to add support in mainline Linux kernel for several Chromebooks, these platforms are now being continuously tested as part of kernelci.org. Here's how to set them up for kernel development & automated testing with LAVA.
August 28, 2018 by Mark Filion | News & Events
Starting tomorrow, Collaborans will be in beautiful British Columbia to take part, and speak, in this year's Open Source Summit North America! If you are planning on attending, come say hello or catch one of our presentations!
August 27, 2018 by Robert Foss | Blog
Working with a git based project that has a defacto upstream repository means that you perioducally want to fetch the canonical master branch. This can be simplified with a .gitconfig alias.
August 21, 2018 by Emil Velikov | Blog
A look at the work and motivation behind implementing the Khronos EGLDevice extensions in Mesa. These extensions allow users of open source graphics drivers to cleanly describe & select which device to use in heterogeneous systems.
August 13, 2018 by Ezequiel Garcia | News & Events
Another two months and a half have passed, Linux Kernel v4.18 has been released, which means it's time to stop along the way and make a little retrospective. This time around, seven Collaborans have contributed to the kernel, authoring 61 commits.
August 03, 2018 by Corentin Noël | Blog
GNOME Builder is an Integrated Development Environment designed for the GNOME ecosystem. It most notably features a deep integration to the Git version control system, allow to debug applications quickly and allow in-line documentation viewing.
August 09, 2023 by Edmund Smith | Blog
Rust is a modern language known for its memory safety, efficiency, and wide range of high-level features. But many beginners also run into something else in Rust: how surprisingly difficult it is to represent some common designs.
August 03, 2023 by Marcus Edel | Blog
At Collabora, we're committed to bringing people together. That's why we're pushing state-of-the-art machine-learning techniques like Large Language Models, Speech Recognition, and Speech-Synthesis techniques.
July 31, 2023 by Eugen Hristev | Blog
I have been working on getting U-boot upstream up to speed for the Radxa Rock-5B Rockchip RK3588 board. One of the cool features that I recently published upstream is the ability to boot the board without any kind of non-volatile media (NVM) used.
July 18, 2023 by Eugen Hristev | Blog
I previously talked about getting the bigger brother Rock 5B into mainline U-boot; this time I worked on the Rock 5A, an even tinier SBC based on Rockchip's RK3588S SoC that is one step closer to getting accepted.
June 20, 2023 by Daniel Almeida | Blog
Powered by Rust, the video codec stack on ARCVM is now bringing faster and more reliable video decoding on Chrome OS. Here's how Collabora has been helping shape video virtualization for Chromebooks, and what it means for end users.
June 15, 2023 by Ashok Sidipotu | Blog
Event Dispatcher, part of the upcoming WirePlumber 0.5 release, is a custom PipeWire event scheduling mechanism designed to address many of the fundamental issues in WirePlumber.
June 08, 2023 by Vineet Suryan | Blog
Contrary to traditional software development, data is more important than code in machine learning. Building a high-performing model requires using reliable, precisely labelled data but poor-quality data is not always obvious.
May 31, 2023 by Eugen Hristev | Blog
A while back I presented USB 2.0 host support that was added to U-boot for the Radxa Rock-5B RK3588 Rockchip board. This time, USB 3.0 was added with support for the host and gadget.
May 18, 2023 by Eugen Hristev | Blog
Work continues on the Radxa ROCK5B RK388, as PCIe and RTL8125B networking support in U-boot have now been added. Publishing code as Open Source can benefit many different other projects, and allows anyone to benefit.
May 03, 2023 by Rebecca Mckeever | Blog
NVK, an open-source Vulkan driver for NVIDIA hardware that is part of Mesa, now supports the Vulkan extension VK_KHR_multiview.
April 27, 2023 by Eugen Hristev | Blog
The beauty of Open Source is that we can reuse code written by many other people, keep their authorship, and credit them for their work, without needing to reinvent anything!
April 18, 2023 by Xavier Claessens | Blog
Want to develop your Meson project in a modern IDE? Make sure to install Meson VSCode extension which is now fully functional with the recent release of Meson 1.1.0!
October 03, 2024 by Kara Bembridge | News & Events
For the first time in over a decade, the GStreamer Conference will be taking place in North America, and we're prepped and ready with no less than 10 talks to share! Catch the latest developments and AI advancements for this multimedia framework.
September 19, 2024 by Shreeya Patel | News & Events
The latest 6.11 kernel release is here! This release improves performance, security, and hardware compatibility, increasing the kernel's flexibility and efficiency for various computing environments.
September 18, 2024 by Erik Faye-Lund | News & Events
It is now possible to start kicking the tires on Vulkan with an open source driver on Arm Mali-G610 and Mali-G310 GPUs. The Panfrost project continues to grow!
September 16, 2024 by Kara Bembridge | News & Events
Collabora will be in Vienna for the Media Summit, Open Source Summit Europe, and Linux Plumbers! Catch one of our many talks.
September 13, 2024 by Kara Bembridge | News & Events
As guests at the STMicroelectronics booth, Collabora will be demonstrating how the STM32MP2 chip is perfectly suited for enabling edge AI solutions in industrial environments.
August 29, 2024 by Kara Bembridge | News & Events
Collabora is headed to Amsterdam for IBC! Drop by to see our work on the DAB protocol, our integration of LCEVC, and our latest XR project, ElectricMaple.
July 24, 2024 by Deborah Brouwer | News & Events
OpenQA is a tool for functional, end-to-end testing of operating system distributions. Earlier this year, Collabora undertook a project, sponsored by Meta, to reproduce Fedora’s openQA deployment in the AWS cloud.
July 18, 2024 by Sebastian Reichel | News & Events
The latest kernel 6.10 release brings multiple core changes and updates to BH workqueues. Let's examine the developments implemented by Collabora's engineers.
July 15, 2024 by Eric Smith | News & Events
The Panthor kernel driver and Mesa Panfrost driver combination has achieved official conformance for OpenGL ES 3.1 on the Mali-G610 chip, ensuring reliable performance for users on Mesa version 24.1.1.
June 19, 2024 by Mark Filion | News & Events
Making its debut this week at Augmented World Expo (AWE) in Long Beach, ElectricMaple is an innovative, open source project by Collabora and PlutoVR designed to enhance standalone XR experiences through remote-rendering.
May 30, 2024 by Kara Bembridge | News & Events
Join us at Augmented World Expo for a first-hand look at our recent XR work including ElectricMaple remote rendering, and xrdesktop showcasing a fully open-source 3-window desktop configuration with gaze-driven window selection.
May 22, 2024 by Faith Ekstrand | News & Events
Mesa 24.1 is out, and the graphics team at Collabora has been working hard to bring a slew of new features and bug fixes to Panfrost, Zink, NVK, and Mesa in general. Here's a look at their contributions for this release cycle.
Here are the events we'll be attending in the coming weeks – come say hello!
June 10-13, Hamburg, Germany
June 10-12, Long Beach, USA
June 11-13, Orlando, USA
June 30-July 4, Nantes, France
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português