News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

GStreamer Spring Hackfest 2016

May 25, 2016 by Olivier Crête  |   Blog

After missing the last few GStreamer hackfests I finally managed to attend this time. It was held in Thessaloniki, Greece’s second largest city. The city is located by the sea side and the entire hackfest and related activities were either directly by…

GStreamer Spring Hackfest 2016

News: Linux Kernel 4.6

May 18, 2016 by Mark Filion  |   News and Events

Linux Kernel 4.6 was released this week, with a total of 9 Collabora engineers taking part in its development, Collabora’s highest number of engineers contributing to a single Linux Kernel release yet!

News: Linux Kernel 4.6

Linux Kernel 4.6: More active Collabora contributors than ever before

May 17, 2016 by Gustavo Padovan  |   Blog

Linux Kernel 4.6 was released this week, with a total of 9 Collabora engineers taking part in its development, Collabora’s highest number of engineers contributing to a single Linux Kernel release yet. In total Collabora contributed 42 patches.

Linux Kernel 4.6: More active Collabora contributors than ever before

Event: GStreamer Spring Hackfest 2016

May 13, 2016 by Mark Filion  |   News and Events

Starting today, 13 May, and throughout the weekend, four Collaborans will be attending the GStreamer Spring Hackfest 2016 in Thessaloniki, Greece!

Event: GStreamer Spring Hackfest 2016

Validating changes to KMS drivers with IGT

April 21, 2016 by Tomeu Vizoso  |   Blog

New DRM drivers are being added to almost each new kernel release, and because the mode setting API is so rich and complex, bugs do slip in that translate to differences in behaviour between drivers.

Validating changes to KMS drivers with IGT

Yocto and OpenEmbedded at Collabora

April 15, 2016 by Andrew Shadura  |   Blog

How the use of Yocto and OpenEmbedded helps corporations migrate to free software.

Yocto and OpenEmbedded at Collabora

Event: Apertis hands-on session, April 28

April 11, 2016 by Mark Filion  |   News and Events

On Thursday 28th of April in Paris, France Bosch and Collabora will be hosting the first Apertis hands-on session during the GENIVI AMM. The session will give everyone present an opportunity to work first hand with Apertis and produce applications to…

Event: Apertis hands-on session, April 28

Collabora contributions to Linux Kernel 4.5

March 17, 2016 by Gustavo Padovan  |   Blog

Linux Kernel 4.5 was released earlier this week, and once again Collabora engineers played a role in its development. In addition to their current projects, seven Collabora engineers contributed a total of 33 patches to the new Kernel.

Collabora contributions to Linux Kernel 4.5

A programmer's view on digital images: the essentials

February 16, 2016 by Pekka Paalanen  |   Blog

How is an uncompressed raster image laid out in computer memory? How is a pixel represented? What are stride and pitch and what do you need them for? How do you address a pixel in memory? How do you describe an image in memory? Pekka discusses the essential…

A programmer's view on digital images: the essentials

Vulkan 1.0 specification released with day-one support for Wayland

February 16, 2016 by Daniel Stone  |   Blog

Today sees the public release of Vulkan 1.0, the next-generation graphics API from the Khronos Group. As a member of Khronos, Collabora has been committed to improving EGL, OpenGL ES and OpenGL itself, and this continues with Vulkan.

Vulkan 1.0 specification released with day-one support for Wayland

News: Vulkan 1.0 specification released

February 16, 2016 by Mark Filion  |   News and Events

Today sees the public release of Vulkan 1.0, the next-generation graphics API from the Khronos Group. As a member of Khronos, Collabora has been committed to improving EGL, OpenGL ES and OpenGL itself, and this continues with Vulkan.

News: Vulkan 1.0 specification released

Community time at Collabora

February 12, 2016 by Andrew Shadura  |   Blog

Apart from upstreaming work which may be done for clients, Collabora encourages its engineers to spend up to two hours weekly for upstreaming, and use up to five days per year as Community days.

Community time at Collabora

The latest on cmtp-responder, a permissively-licensed MTP responder implementation

June 12, 2024 by Andrzej Pietrasiewicz  |   Blog

Part 3 of the cmtp-responder series with a focus on USB gadgets explores several new elements including a unified build environment with Docker and an example strategy for building and deploying to a target.

The latest on cmtp-responder, a permissively-licensed MTP responder implementation

A roadmap for VirtIO Video on ChromeOS: part 3

June 06, 2024 by Daniel Almeida  |   Blog

The final installment of a series explaining how Collabora is helping shape the video virtualization story for Chromebooks with a focus on the future plans for cros-libva and cros-codecs.

A roadmap for VirtIO Video on ChromeOS: part 3

Hacking on the PipeWire GStreamer elements

June 05, 2024 by George Kiagiadakis  |   Blog

Last week I attended the GStreamer spring hackfest in Thessaloniki to work on the PipeWire GStreamer elements and connect with the community.

Hacking on the PipeWire GStreamer elements

Transforming speech technology with WhisperLive

May 28, 2024 by Kara Bembridge  |   Blog

The world of AI has made leaps and bounds from what It once was, but there are still some adjustments required for the optimal outcome. With the help of WhisperLive, VoxAI was able to improve its response time and oratory abilities.

Transforming speech technology with WhisperLive

Re-converging control flow on NVIDIA GPUs - What went wrong, and how we fixed it

April 25, 2024 by Faith Ekstrand  |   Blog

While I managed to land support for two extensions, implementing control flow re-convergence in NVK did not go as planned. This is the story of what went wrong and how we fixed it.

Re-converging control flow on NVIDIA GPUs - What went wrong, and how we fixed it

Automatic regression handling and reporting for the Linux Kernel

March 14, 2024 by Ricardo Cañuelo Navarro  |   Blog

In continuation with our series about Kernel Integration we'll go into more detail about how regression detection, processing, and tracking can be improved to provide a better service to developers and maintainers.

Automatic regression handling and reporting for the Linux Kernel

Almost a fully open-source boot chain for Rockchip's RK3588!

February 21, 2024 by Eugen Hristev  |   Blog

Now included in our Debian images & available via our GitLab, you can build a complete, working BL31 (Boot Loader stage 3.1), and replace the closed binary blob with an open-source binary that anyone can compile.

Almost a fully open-source boot chain for Rockchip's RK3588!

What's the latest with WirePlumber?

February 19, 2024 by George Kiagiadakis  |   Blog

Back in 2022, after a series of issues were found in its design, I made the call to rework some of WirePlumber's fundamentals in order to allow it to grow. So where are we now? And what's next? Let's dive in!

What's the latest with WirePlumber?

DRM-CI: A GitLab-CI pipeline for Linux kernel testing

February 08, 2024 by Helen Koike  |   Blog

Continuing our Kernel Integration series, we're excited to introduce DRM-CI, a groundbreaking solution that enables developers to test their graphics subsystem patches across numerous devices within the community's shared infrastructure.

DRM-CI: A GitLab-CI pipeline for Linux kernel testing

Persian Rug, Part 4 - The limitations of proxies

January 23, 2024 by Edmund Smith  |   Blog

This is the fourth and final part in a series on persian-rug, a Rust crate for interconnected objects. We've touched on the two big limitations: lack of deletion and lack of enforced matching between proxies and containers. Let's look at other solutions.

Persian Rug, Part 4 - The limitations of proxies

How to share code between Vulkan and Gallium

January 16, 2024 by Faith Ekstrand  |   Blog

One of the key high-level challenges of building Mesa drivers these days is figuring out how to best share code between a Vulkan driver and a Gallium driver when Gallium isn't really capable of implementing Vulkan. Here's how.

How to share code between Vulkan and Gallium

Google Open Source Peer Bonus 2023

December 19, 2023 by Mark Filion  |   Blog

Google Open Source have chosen their second group of winners for the 2023 Google Open Source Peer Bonus Program, and Arnaud Ferraris, Senior Software Engineer at Collabora and Mobian project lead, is among the recipients!

Google Open Source Peer Bonus 2023

Debuting at IOT Solutions World Congress

May 09, 2024 by Kara Bembridge  |   News & Events

This year will be Collabora's first time exhibiting at IOTSWC, in partnership with STMicroelectronics. Collabora will be showcasing how the STM32MP2 is an ideal chip to enable edge AI solution in industrial environments.

Debuting at IOT Solutions World Congress

Effortless GStreamer Analytics Cross-Platform Support via ONNX Runtime

April 29, 2024 by Aaron Boxer  |   News & Events

GStreamer's support for diverse hardware and software platforms extends to its upstream Machine Learning capabilities, exemplified by its cross-platform ONNX Runtime implementation.

Effortless GStreamer Analytics Cross-Platform Support via ONNX Runtime

Collabora, not just Earth Day. Every day.

April 22, 2024 by Kara Bembridge  |   News & Events

As part of our commitment to social responsibility, we've been part of the 1% for the Planet Network since 2022. The environmental partners we support help to better the planet.

Collabora, not just Earth Day. Every day.

Monado stays ahead: Keeping pace with OpenXR 1.1 for cross-platform, open source XR

April 17, 2024 by Frederic Plourde  |   News & Events

Monado, the cross-platform open source XR runtime, has recently received significant updates to align with the features and specifications of OpenXR 1.1, ensuring compatibility and optimal performance for developers and users alike.

Monado stays ahead: Keeping pace with OpenXR 1.1 for cross-platform, open source XR

Blast from the past at Embedded World: Atari plays for Linux

April 11, 2024 by Kara Bembridge  |   News & Events

Adhering to the fundamentals of open source, the Atari VCS OS is based on Debian using the Apertis infrastructure, and the graphics rely on Weston as its Wayland compositor.

Blast from the past at Embedded World: Atari plays for Linux

Up close and personal with STMicroelectronics' STM32MP2 at Embedded World

April 10, 2024 by Mark Filion  |   News & Events

Using TensorFlow Lite models optimized for the STM3MP2 NPU along with an upstream-ready H.264 encoder (Video4Linux2), this demo showcases GStreamer's all-new analytic metadata framework.

Up close and personal with STMicroelectronics' STM32MP2 at Embedded World

New unixfd plugin in GStreamer 1.24

April 08, 2024 by Xavier Claessens  |   News & Events

GStreamer 1.24 was recently released, and with it came with a new plugin to help separate pipelines into different processes.

New unixfd plugin in GStreamer 1.24

Embedded Open Source Summit 2024

April 05, 2024 by Kara Bembridge  |   News & Events

Seattle is hosting this year's Embedded Open Source Summit, the umbrella conference for a collection of open source events. This is the premier space for the open source community and we'll be there with 6 talks!

Embedded Open Source Summit 2024

Collabora's WhisperFusion nominated for Embedded Award 2024

April 03, 2024 by Mark Filion  |   News & Events

Honoring outstanding innovations in the field of embedded system technologies, the annual Embedded Award ceremony will be taking place next week at Embedded World 2024 in Nuremberg.

Collabora's WhisperFusion nominated for Embedded Award 2024

OpenXR & Monado: Recent progress and what's to come

April 02, 2024 by Frederic Plourde  |   News & Events

As we reflect on the strides made in recent months, it's remarkable to see how OpenXR and Monado have evolved and are shaping the future of XR development. Let's take a closer look at the progress made and noteworthy achievements.

OpenXR & Monado: Recent progress and what's to come

Future-proofing at Embedded World 2024

March 22, 2024 by Kara Bembridge  |   News & Events

One of the largest trade fair of its kind, and a global platform for the embedded community, Embedded World will be taking place next month at the NürnbergMesse in the quaint city of Nuremberg, Germany

Future-proofing at Embedded World 2024

GStreamer 1.24: New heights in embedded, network streaming & analytics

March 19, 2024 by Daniel Morin  |   News & Events

Thanks to sponsors like STMicroelectronics, Netflix, Living Optics, and ChromeOS, Collabora once again came in first place with the most contributors for this release, with 16 developers taking part.

GStreamer 1.24: New heights in embedded, network streaming & analytics

Search the newsroom

Upcoming Events

Here are the events we'll be attending in the coming weeks – come say hello!

Agritechnica

November 9-15, Hanover, Germany

 

Capitole du Libre

November 15-16, Toulouse, France

 

Embedded Software Engineering Kongress

December 1-5, Sindelfingen, Germany

Featured Video

Open Since 2005 logo

Our website only uses a strictly necessary session cookie provided by our CMS system. To find out more please follow this link.

Collabora Limited © 2005-2025. All rights reserved. Privacy Notice. Sitemap.