October 12, 2018 by Zeeshan Ali | Blog
After I started working for Collabora in April, I've finally been able to put some time on maintenance and development of Geoclue again. While I've fixed quite a few issues on the backlog, there has been some significant changes as of late.
October 12, 2018 by Mark Filion | News & Events
We're headed to Heraklion, Greece, to meet with the Panhellenic FOSS community at FOSSCOMM, a conference for programmers, students and anyone else interested in the open source movement!
October 10, 2018 by Martyn Welch | Blog
Like all software, Open Source software isn't without it's bugs and issues. However, thanks to the nature of Open Source, resolving or mitigating the issue you encountered can be quite the satisfying adventure when it comes to scratching the itch.
October 02, 2018 by Lucas Kanashiro | Blog
Last month, the first "MicroDebConf" took place at the Gama campus of the University of Brasilia. Here's a look at how this one day event came to be, and what was accomplished during that day.
September 20, 2018 by Mark Filion | News & Events
Next week, Collaborans will be heading to Paris, A Coruña & Berlin, to sponsor and speak at four different conferences: Embedded Recipes, Kernel Recipes, All Systems Go and XDC 2018. See you there?
September 18, 2018 by Ezequiel Garcia | Blog
When working on the Linux Kernel, testing via QEMU is pretty common. Here's a look at virtme, a QEMU wrapper that uses the host instead of a virtual disk, making working with QEMU extremely easy.
September 10, 2018 by Mark Filion | News & Events
From September 14 to 18, Collabora will be exhibiting at the IBC Show 2018, the "world's most influential media, entertainment and technology show"! If you are planning on attending, please make sure to stop by our booth, D-15 in Hall 14!
August 30, 2018 by Maxime Buquet | Blog
Earlier this month, Collabora sponsored & hosted the XMMP Sprint, the first developer event in the XMPP community in a long time. Here's a look at what was accomplished over the weekend, and what's next for this open standard.
August 29, 2018 by Guillaume Tucker | Blog
In addition to Collabora's work to add support in mainline Linux kernel for several Chromebooks, these platforms are now being continuously tested as part of kernelci.org. Here's how to set them up for kernel development & automated testing with LAVA.
August 28, 2018 by Mark Filion | News & Events
Starting tomorrow, Collaborans will be in beautiful British Columbia to take part, and speak, in this year's Open Source Summit North America! If you are planning on attending, come say hello or catch one of our presentations!
August 27, 2018 by Robert Foss | Blog
Working with a git based project that has a defacto upstream repository means that you perioducally want to fetch the canonical master branch. This can be simplified with a .gitconfig alias.
August 21, 2018 by Emil Velikov | Blog
A look at the work and motivation behind implementing the Khronos EGLDevice extensions in Mesa. These extensions allow users of open source graphics drivers to cleanly describe & select which device to use in heterogeneous systems.
December 05, 2023 by Edmund Smith | Blog
Our look at the Rust crate for interconnected objects continues, as we examine how persian-rug really does tie the room together by providing a convenient container solution with a safety net to go along with it.
December 01, 2023 by Gustavo Padovan | Blog
The testing ecosystem in the Linux kernel has been steadily growing, but are efforts sufficiently coordinated? How can we help developers and maintainers integrate code more efficiently? How can we mitigate maintainer burnout?
October 30, 2023 by Ashok Sidipotu | Blog
With the upcoming 0.5 release, WirePlumber's Lua scripts will be transformed with the new Event Dispatcher. More modular and extensible with very little redundant processing, they will look and feel completely different.
October 02, 2023 by Daniel Almeida | Blog
This second installment explores the Rust libraries Collabora developed to decode video and how these libraries are used within ARCVM to eventually remove CrosVM's dependency on the Chrome codec stack.
September 27, 2023 by Edmund Smith | Blog
Why is creating object graphs hard in Rust? In part 1, we looked at a basic pattern, where two types of objects refer to one another. In this part we'll follow up in more detail and examine the different approaches that can be applied.
September 13, 2023 by Jakub Piotr Clapa | Blog
Text-to-speech (TTS) models are playing a transformative role, from enriching audiobooks to enhancing podcasts and even improving interactions with chatbots. Meet WhisperSpeech, an Open Source text-to-speech model developed by Collabora.
August 21, 2023 by Eugen Hristev | Blog
In Linux, the Industrial Input/Output subsystem manages devices like Analog to Digital Converters, Light sensors, accelerometers, etc. On the other hand, the Input subsystem handles keyboards, mice, touchscreens, and any device that has a human interface.
August 10, 2023 by Paweł Wieczorek | Blog
Collabora's main testing laboratory has grown to automate testing on over 150 devices of about 30 different types. The lab receives job submissions from several CI systems, e.g. KernelCI, MesaCI, and Apertis QA.
August 09, 2023 by Edmund Smith | Blog
Rust is a modern language known for its memory safety, efficiency, and wide range of high-level features. But many beginners also run into something else in Rust: how surprisingly difficult it is to represent some common designs.
August 03, 2023 by Marcus Edel | Blog
At Collabora, we're committed to bringing people together. That's why we're pushing state-of-the-art machine-learning techniques like Large Language Models, Speech Recognition, and Speech-Synthesis techniques.
July 31, 2023 by Eugen Hristev | Blog
I have been working on getting U-boot upstream up to speed for the Radxa Rock-5B Rockchip RK3588 board. One of the cool features that I recently published upstream is the ability to boot the board without any kind of non-volatile media (NVM) used.
July 18, 2023 by Eugen Hristev | Blog
I previously talked about getting the bigger brother Rock 5B into mainline U-boot; this time I worked on the Rock 5A, an even tinier SBC based on Rockchip's RK3588S SoC that is one step closer to getting accepted.
April 17, 2024 by Frederic Plourde | News & Events
Monado, the cross-platform open source XR runtime, has recently received significant updates to align with the features and specifications of OpenXR 1.1, ensuring compatibility and optimal performance for developers and users alike.
April 11, 2024 by Kara Bembridge | News & Events
Adhering to the fundamentals of open source, the Atari VCS OS is based on Debian using the Apertis infrastructure, and the graphics rely on Weston as its Wayland compositor.
April 10, 2024 by Mark Filion | News & Events
Using TensorFlow Lite models optimized for the STM3MP2 NPU along with an upstream-ready H.264 encoder (Video4Linux2), this demo showcases GStreamer's all-new analytic metadata framework.
April 08, 2024 by Xavier Claessens | News & Events
GStreamer 1.24 was recently released, and with it came with a new plugin to help separate pipelines into different processes.
April 05, 2024 by Kara Bembridge | News & Events
Seattle is hosting this year's Embedded Open Source Summit, the umbrella conference for a collection of open source events. This is the premier space for the open source community and we'll be there with 6 talks!
April 03, 2024 by Mark Filion | News & Events
Honoring outstanding innovations in the field of embedded system technologies, the annual Embedded Award ceremony will be taking place next week at Embedded World 2024 in Nuremberg.
April 02, 2024 by Frederic Plourde | News & Events
As we reflect on the strides made in recent months, it's remarkable to see how OpenXR and Monado have evolved and are shaping the future of XR development. Let's take a closer look at the progress made and noteworthy achievements.
March 22, 2024 by Kara Bembridge | News & Events
One of the largest trade fair of its kind, and a global platform for the embedded community, Embedded World will be taking place next month at the NürnbergMesse in the quaint city of Nuremberg, Germany
March 19, 2024 by Daniel Morin | News & Events
Thanks to sponsors like STMicroelectronics, Netflix, Living Optics, and ChromeOS, Collabora once again came in first place with the most contributors for this release, with 16 developers taking part.
March 11, 2024 by Muhammad Usama Anjum | News & Events
The latest Linux Kernel 6.8 release brings thousands of new lines of code, improving the core kernel, architecture support, networking, file systems, and more.
March 04, 2024 by Boris Brezillon | News & Events
Late last week, the long-awaited kernel driver supporting 10th-generation Arm Mali GPUs was merged into drm-misc. The existing Gallium driver support has also been extended, effectively enabling GPUs on Rockchip's RK3588 platforms.
March 01, 2024 by Helen Koike | News & Events
This initial version includes static checks (checkpatch and smatch for now) and build tests across various architectures and configurations, and introduces a flexible 'scenarios' mechanism for subsystem-specific extensions.
Here are the events we'll be attending in the coming weeks – come say hello!
May 8-9, Stuttgart, Germany
May 12-14, Seoul, South Korea
May 13, Nice, France
May 14-16, Nice, France
May 16-18, Nice, France
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português