October 18, 2018 by Mark Filion | News & Events
Next week, Collabora will be sponsoring, exhibiting & speaking at Embedded Linux Confererence Europe in Edinburgh, Scotland. Now in its 13th year, ELCE is the premier vendor-neutral technical conference for companies and developers using embedded Linux.
October 15, 2018 by Mark Filion | News & Events
This week, two Collaborans will be in Dresden, Germany to take part in the AGL All Member Meeting. George Kiagiadakis and Daniel Stone will be in attendance, with the former also giving a presentation on the latest happenings in upstream multimedia.
October 12, 2018 by Zeeshan Ali | Blog
After I started working for Collabora in April, I've finally been able to put some time on maintenance and development of Geoclue again. While I've fixed quite a few issues on the backlog, there has been some significant changes as of late.
October 12, 2018 by Mark Filion | News & Events
We're headed to Heraklion, Greece, to meet with the Panhellenic FOSS community at FOSSCOMM, a conference for programmers, students and anyone else interested in the open source movement!
October 10, 2018 by Martyn Welch | Blog
Like all software, Open Source software isn't without it's bugs and issues. However, thanks to the nature of Open Source, resolving or mitigating the issue you encountered can be quite the satisfying adventure when it comes to scratching the itch.
October 02, 2018 by Lucas Kanashiro | Blog
Last month, the first "MicroDebConf" took place at the Gama campus of the University of Brasilia. Here's a look at how this one day event came to be, and what was accomplished during that day.
September 20, 2018 by Mark Filion | News & Events
Next week, Collaborans will be heading to Paris, A Coruña & Berlin, to sponsor and speak at four different conferences: Embedded Recipes, Kernel Recipes, All Systems Go and XDC 2018. See you there?
September 18, 2018 by Ezequiel Garcia | Blog
When working on the Linux Kernel, testing via QEMU is pretty common. Here's a look at virtme, a QEMU wrapper that uses the host instead of a virtual disk, making working with QEMU extremely easy.
September 10, 2018 by Mark Filion | News & Events
From September 14 to 18, Collabora will be exhibiting at the IBC Show 2018, the "world's most influential media, entertainment and technology show"! If you are planning on attending, please make sure to stop by our booth, D-15 in Hall 14!
August 30, 2018 by Maxime Buquet | Blog
Earlier this month, Collabora sponsored & hosted the XMMP Sprint, the first developer event in the XMPP community in a long time. Here's a look at what was accomplished over the weekend, and what's next for this open standard.
August 29, 2018 by Guillaume Tucker | Blog
In addition to Collabora's work to add support in mainline Linux kernel for several Chromebooks, these platforms are now being continuously tested as part of kernelci.org. Here's how to set them up for kernel development & automated testing with LAVA.
August 28, 2018 by Mark Filion | News & Events
Starting tomorrow, Collaborans will be in beautiful British Columbia to take part, and speak, in this year's Open Source Summit North America! If you are planning on attending, come say hello or catch one of our presentations!
September 27, 2023 by Edmund Smith | Blog
Why is creating object graphs hard in Rust? In part 1, we looked at a basic pattern, where two types of objects refer to one another. In this part we'll follow up in more detail and examine the different approaches that can be applied.
September 13, 2023 by Jakub Piotr Clapa | Blog
Text-to-speech (TTS) models are playing a transformative role, from enriching audiobooks to enhancing podcasts and even improving interactions with chatbots. Meet WhisperSpeech, an Open Source text-to-speech model developed by Collabora.
August 21, 2023 by Eugen Hristev | Blog
In Linux, the Industrial Input/Output subsystem manages devices like Analog to Digital Converters, Light sensors, accelerometers, etc. On the other hand, the Input subsystem handles keyboards, mice, touchscreens, and any device that has a human interface.
August 10, 2023 by Paweł Wieczorek | Blog
Collabora's main testing laboratory has grown to automate testing on over 150 devices of about 30 different types. The lab receives job submissions from several CI systems, e.g. KernelCI, MesaCI, and Apertis QA.
August 09, 2023 by Edmund Smith | Blog
Rust is a modern language known for its memory safety, efficiency, and wide range of high-level features. But many beginners also run into something else in Rust: how surprisingly difficult it is to represent some common designs.
August 03, 2023 by Marcus Edel | Blog
At Collabora, we're committed to bringing people together. That's why we're pushing state-of-the-art machine-learning techniques like Large Language Models, Speech Recognition, and Speech-Synthesis techniques.
July 31, 2023 by Eugen Hristev | Blog
I have been working on getting U-boot upstream up to speed for the Radxa Rock-5B Rockchip RK3588 board. One of the cool features that I recently published upstream is the ability to boot the board without any kind of non-volatile media (NVM) used.
July 18, 2023 by Eugen Hristev | Blog
I previously talked about getting the bigger brother Rock 5B into mainline U-boot; this time I worked on the Rock 5A, an even tinier SBC based on Rockchip's RK3588S SoC that is one step closer to getting accepted.
June 20, 2023 by Daniel Almeida | Blog
Powered by Rust, the video codec stack on ARCVM is now bringing faster and more reliable video decoding on Chrome OS. Here's how Collabora has been helping shape video virtualization for Chromebooks, and what it means for end users.
June 15, 2023 by Ashok Sidipotu | Blog
Event Dispatcher, part of the upcoming WirePlumber 0.5 release, is a custom PipeWire event scheduling mechanism designed to address many of the fundamental issues in WirePlumber.
June 08, 2023 by Vineet Suryan | Blog
Contrary to traditional software development, data is more important than code in machine learning. Building a high-performing model requires using reliable, precisely labelled data but poor-quality data is not always obvious.
May 31, 2023 by Eugen Hristev | Blog
A while back I presented USB 2.0 host support that was added to U-boot for the Radxa Rock-5B RK3588 Rockchip board. This time, USB 3.0 was added with support for the host and gadget.
October 22, 2020 by Mylène Josserand | News & Events
Collaborans continue to be very active in the Linux kernel, authoring over 150 commits in this release. Here's a look at the improvements, and new features, contributed by our team, notably in hardware support, multimedia, graphics and testing.
October 06, 2020 by Stéphane Cerveau | News & Events
A move to GitLab. A switch to the powerful Meson build system. A fast and reliable CI system implemented. The GStreamer community has been busy, bringing a bevy of enhancements to 1.18. Here's a look at the key contributions by Collaborans.
September 15, 2020 by Mark Filion | News & Events
The lineup of great virtual conferences continues this week with the 2020 edition of X.Org Developer's Conference (XDC), the leading event for developers working on all things Open graphics, including the Linux kernel, Mesa, DRM, Wayland and X11.
August 24, 2020 by Mark Filion | News & Events
August ends on a high note with two virtual events this week: DebConf20, Debian's annual conference, and Linux Plumbers Conference, the premier event for developers working at all levels of the Linux kernel's plumbing layer and beyond.
August 05, 2020 by Dafna Hirschfeld | News & Events
The ability for a relatively small software consultancy to contribute at this level demonstrates a fantastic improvement in vendors' mindset when it comes to working Open First and providing mainline support out-of-box as early as possible.
July 17, 2020 by Christoph Haag | News & Events
HTC Vive (Pro) and Valve Index hardware users can now experiment with positional tracking in Monado, thanks to the implementation of a libsurvive driver using the libsurvive library developed by Charles Lohr, David Berger and many contributors.
July 16, 2020 by George Kiagiadakis | News & Events
It is with great pleasure that we announce the availability of WirePlumber (the PipeWire session manager) version 0.3.0. This release brings support for desktop use cases and is a working drop-in replacement for PipeWire's example session manager.
July 09, 2020 by Erica Ryoo | News & Events
Despite the many obstacles brought on by the pandemic, Collabora continues to build and strengthen its engineering and administration teams for the road ahead. Join us in welcoming Angelica, Raghavendra, Doug, Italo and Theodotos!
June 30, 2020 by Lubosz Sarnecki | News & Events
The recent improvements in Monado like out of process compositing and multi-layer rendering released with v0.2 prepared the requirements to implement OpenXR's XR_EXTX_overlay extension.
June 18, 2020 by Mark Filion | News & Events
Collabora will be presenting on five separate occasions during the virtual editions of Embedded Linux Conference North America and Open Source Summit North America, taking place later this month.
June 04, 2020 by Andrzej Pietrasiewicz | News & Events
This latest release is the first to contain development work accomplished amid the lockdown measures. Despite these significant changes, Collaborans have also been steadfast in their contributions, with multiple projects progressing.
June 01, 2020 by Mark Filion | News & Events
Coding hss begun for this year's Google Summer of Code (GSoC) projects, announced earlier last month. The 2020 edition selected 1,199 students from 66 countries, to work with 199 mentoring organizations over the course of the summer.
Here are the events we'll be attending in the coming weeks – come say hello!
February 1-2, Brussels, Belgium
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português