News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

Customizing WirePlumber's configuration for embedded systems

April 29, 2025 by George Kiagiadakis  |   Blog

Configuring WirePlumber on embedded Linux systems can be somewhat confusing. We take a moment to demystify this process for a particular use case.

Customizing WirePlumber's configuration for embedded systems

Evolving hardware, evolving demo: Collabora's Embedded World Board Farm

April 24, 2025 by Martyn Welch  |   Blog

Collabora's Board Farm demo, showcasing our recent hardware enablement and continuous integration efforts, has undergone serious development over the years. Here's a look at notable changes and improvements made for Embedded World 2025.

Evolving hardware, evolving demo: Collabora's Embedded World Board Farm

NVK enabled for Maxwell, Pascal, and Volta GPUs

April 22, 2025 by Faith Ekstrand  |   News & Events

As of today, NVK is a conformant Vulkan 1.4 implementation for NVIDIA Maxwell, Pascal, and Volta GPUs, and will be enabled by default starting with Mesa 25.1.

NVK enabled for Maxwell, Pascal, and Volta GPUs

Raising the bar for Open Source standards through OpenChain

April 17, 2025 by Eleni Katsoula  |   News & Events

Our commitment to open source extends beyond contributing code. We are dedicated to upholding the highest standards of license compliance throughout our development processes.

Raising the bar for Open Source standards through OpenChain

Embedded week in Nice

April 15, 2025 by Mark Filion  |   News & Events

This May, Embedded Recipes 2025, co-sponsored by Collabora, heads to Nice, France with talks, workshops, and a PipeWire hackfest, all bookended by the Linux Media Summit and the GStreamer Spring Hackfest!

Embedded week in Nice

PanVK is officially Vulkan 1.1 conformant

April 14, 2025 by Erik Faye-Lund  |   News & Events

PanVK has reached a new milestone, and is now officially conformant with the Vulkan 1.1 specification on the Arm Mali-G610 GPU! The submission was done from the Mesa 25.0.2 release, and covers both armhf as well as aarch64 architectures.

PanVK is officially Vulkan 1.1 conformant

A tale of three demos: Breakthroughs in Open Source graphics at Embedded World 2025

April 10, 2025 by Daniel Stone  |   News & Events

Three demos. One stand. From end-to-end HDR and a brand-new SoC running PanVK, to NVK and WebGPU out of the box — discover how Collabora pushed open source graphics forward at Embedded World 2025.

A tale of three demos: Breakthroughs in Open Source graphics at Embedded World 2025

GStreamer 1.26: Improved hardware efficiency, the MPEG-5 LCEVC codec, and more

April 09, 2025 by Olivier Crête  |   News & Events

Collabora once again played a key role in the latest release of GStreamer, contributing enhancements such as improved hardware efficiency, support for the MPEG-5 LCEVC codec, and better integration for analytics and machine learning.

GStreamer 1.26: Improved hardware efficiency, the MPEG-5 LCEVC codec, and more

Kernel 6.14: Enhanced hardware capabilities, improved performance & more!

March 26, 2025 by Cristian Ciocaltea  |   News & Events

The kernel release emphasizes the continuing growth and maturity of the Linux ecosystem and delivers new features, improvements, and optimizations that everyone will be eager to explore. See where Collabora's kernel team contributed to this release.

Kernel 6.14: Enhanced hardware capabilities, improved performance & more!

Hololight joins the OpenXR momentum

March 26, 2025 by Kara Bembridge  |   News & Events

Collabora is thrilled to see its partner, Hololight, join the Khronos Group and become an active member of the OpenXR Working Group. We are excited to support their innovative approach and rapid expansion in the XR streaming space.

Hololight joins the OpenXR momentum

Goodbye Nouveau GL. Hello Zink!

March 11, 2025 by Faith Ekstrand  |   News & Events

Starting with Mesa 25.1, Nouveau users will no longer get the old Nouveau OpenGL driver by default and will instead get Zink+NVK.

Goodbye Nouveau GL. Hello Zink!

MediaTek Genio update: Kernel, Debian 13 images, and KernelCI

March 10, 2025 by Sjoerd Simons  |   News & Events

Towards the end of 2024, MediaTek and Collabora started on a journey to improve upstream support for MediaTek Genio devices. Here's where things stand.

MediaTek Genio update: Kernel, Debian 13 images, and KernelCI

Dynamic relocs, runtime overflows and -fPIC

October 01, 2014 by Philip Withnall  |   Blog

A discussion of dynamic relocation, position independent code, the -fPIC flag and how it affects generated assembly. The focus would be on the practical implications of it all, including when to (and when not to) use -fPIC.

Dynamic relocs, runtime overflows and -fPIC

A web browser for the Raspberry Pi

September 01, 2014 by Marco Barisione  |   Blog

Collabora has been working with the Raspberry Pi Foundation on various projects including a web browser optimised for the Raspberry Pi. Since the first beta release we have made huge improvements; now the browser is more responsive, it’s faster, and…

A web browser for the Raspberry Pi

GStreamer gains V4L2 Mem-2-Mem support

August 27, 2014 by Nicolas Dufresne  |   Blog

A team at Samsung (and many core Linux contributors) started adding new type of drivers to the Linux Media Infrastructure API (also known as Video4Linux 2).

GStreamer gains V4L2 Mem-2-Mem support

Wayland on MALI

August 13, 2014 by Daniel Stone  |   Blog

Predictable media latency, low power usage and vastly improved A/V sync. Wayland versus X11 explained on ARM MALI

Wayland on MALI

Raspberry Pi custom box design.

July 16, 2014 by Vince Sanders  |   Blog

It is no great secret that my colleagues at Collabora have been doing work with the Raspberry Pi Foundation.

Raspberry Pi custom box design.

NetSurf Developer Workshop Redux

January 06, 2014 by Vince Sanders  |   Blog

Once again the NetSurf developers congregated in Cambridge at the Collabora offices where we were made welcome in a nice environment for the event.

NetSurf Developer Workshop Redux

2D graphics Wayland/Weston optimizations on the Raspberry Pi

May 23, 2013 by Collabora  |  

Enhancing the graphic software stack for the Raspberry Pi.

2D graphics Wayland/Weston optimizations on the Raspberry Pi

Collabora custom ARM hardware build farm

April 26, 2013 by Vince Sanders  |   Blog

Collabora recently had a problem with a project's ARM build farm. In a nice change of pace it was not that the kernel was crashing, nor indeed any of the software or hardware.

Collabora custom ARM hardware build farm

Another NetSurf Developer Workshop

November 05, 2012 by Vince Sanders  |   Blog

The weekend saw some of the NetSurf developers gather once again to do battle against the Red Queen...no, wait. I mean plan and write code.

Another NetSurf Developer Workshop

Linux kernel presentation

May 24, 2012 by Vince Sanders  |   Blog

Recently I was asked to present a short introduction to the Linux kernel for our project managers. I put together a short slide deck for the presentation which I have decided to share.

Linux kernel presentation

A growth year for upstream kernel contributions

December 22, 2021 by Gustavo Padovan  |   News & Events

With over 350 patches authored and nearly 200 reviewed and tested in multiple subsystems, 2021 was a great year for Linux kernel development at Collabora. Here is a look at some of our achievements during the year.

A growth year for upstream kernel contributions

Meet wxrd, a standalone Wayland compositor for xrdesktop

December 20, 2021 by Christoph Haag  |   News & Events

The Linux desktop in VR goes headless! Introducing wxrd, a standalone Wayland compositor for xrdesktop based on wlroots, with minimal dependencies.

Meet wxrd, a standalone Wayland compositor for xrdesktop

Open Source in Japan, virtually

December 08, 2021 by Mark Filion  |   News & Events

A year of online conferences that began with linux.conf.au will end on a high note next week as Collaborans present three talks at Open Source Summit Japan + Automotive Linux Summit 2021. Join us!

Open Source in Japan, virtually

Kernel 5.15: A small but mighty Halloween release

November 10, 2021 by Sebastian Reichel  |   News & Events

It might be smaller than the last few kernels, but with well above 10,000 non-merge changes, the latest Linux kernel release still packs a punch. Released on October 31, kernel 5.15 brings lots of exciting new features.

Kernel 5.15: A small but mighty Halloween release

WirePlumber in Fedora 35

November 02, 2021 by George Kiagiadakis  |   News & Events

Today marks a very exciting day as Fedora 35 has now been released, and with it comes WirePlumber as the default session manager for PipeWire! Under development by Collabora since 2019, WirePlumber has now entered the linux desktop space.

WirePlumber in Fedora 35

Open Source Summit + Embedded Linux Conference 2021

September 24, 2021 by Mark Filion  |   News & Events

Collaborans will be actively participating in next week's activities with seven talks on topics including Rust build scripts, embedded deep learning on GStreamer, HEVC decoding on mainline Linux, PipeWire and WirePlumber, and more.

Open Source Summit + Embedded Linux Conference 2021

Panfrost achieves OpenGL ES 3.1 conformance on Mali-G52

September 21, 2021 by Alyssa Rosenzweig  |   News & Events

This important milestone is a step forward for the open source driver, as it now certifies Panfrost for use in commercial products containing Mali G52 and paves the way for further conformance submissions on other Mali GPUs.

Panfrost achieves OpenGL ES 3.1 conformance on Mali-G52

Generate a minimal GStreamer build, tailored to your needs

September 16, 2021 by Stéphane Cerveau  |   News & Events

GStreamer can be tricky to ship in a constrained device. Thanks to a partnership with Huawei, you can now use gst-build to generate a minimal GStreamer build, tailored to a specific application, or set of applications. Here's how.

Generate a minimal GStreamer build, tailored to your needs

Kernel 5.14: 30 years in the making and still improving

September 07, 2021 by Nícolas F. R. A. Prado  |   News & Events

With an ever-increasing interest in more modern hardware support, and a more reliable kernel that is thoroughly tested, contributions by Collabora's developers continue to help make this a reality for the Linux kernel.

Kernel 5.14: 30 years in the making and still improving

Linaro Virtual Connect - Fall 2021

September 01, 2021 by Mark Filion  |   News & Events

September's busy conference schedule kicks off next week with the Fall edition of Linaro Virtual Connect. Join us as we look at how to master your PipeWire streams with WirePlumber, and de-mystify GFX virtualization with VirGL!

Linaro Virtual Connect - Fall 2021

Reverse-engineering the Mali G78

July 20, 2021 by Alyssa Rosenzweig  |   News & Events

After a month of reverse-engineering the Arm Mali G78, we’re excited to release documentation on the Valhall instruction set, available as a PDF, as well as a Valhall assembler and disassembler to be used as a reverse-engineering aid.

Reverse-engineering the Mali G78

Kernel 5.13: Growing team and KernelCI hackfest

July 08, 2021 by Gabriel Krisman Bertazi  |   News & Events

Collabora's team working directly on the Linux kernel is growing. Collaborans continue to expand on their efforts to close the gap between hardware support on vendor trees and mainline.

Kernel 5.13: Growing team and KernelCI hackfest

Search the newsroom

Upcoming Events

Here are the events we'll be attending in the coming weeks – come say hello!

XR Expo

May 8-9, Stuttgart, Germany

Khronos F2F

May 12-14, Seoul, South Korea

Linux Media Summit

May 13, Nice, France

Embedded Recipes

May 14-16, Nice, France

GStreamer Spring Hackfest

May 16-18, Nice, France

 

Featured Video

Open Since 2005 logo

Our website only uses a strictly necessary session cookie provided by our CMS system. To find out more please follow this link.

Collabora Limited © 2005-2025. All rights reserved. Privacy Notice. Sitemap.