December 22, 2021 by Gustavo Padovan | News & Events
With over 350 patches authored and nearly 200 reviewed and tested in multiple subsystems, 2021 was a great year for Linux kernel development at Collabora. Here is a look at some of our achievements during the year.
December 20, 2021 by Christoph Haag | News & Events
The Linux desktop in VR goes headless! Introducing wxrd, a standalone Wayland compositor for xrdesktop based on wlroots, with minimal dependencies.
December 08, 2021 by Mark Filion | News & Events
A year of online conferences that began with linux.conf.au will end on a high note next week as Collaborans present three talks at Open Source Summit Japan + Automotive Linux Summit 2021. Join us!
November 26, 2021 by Antonio Caggiano | Blog
A step-by-step guide on how to enable 3D acceleration of Vulkan applications in QEMU through the new Venus experimental Vulkan driver for VirtIO-GPU with a local development environment.
November 10, 2021 by Sebastian Reichel | News & Events
It might be smaller than the last few kernels, but with well above 10,000 non-merge changes, the latest Linux kernel release still packs a punch. Released on October 31, kernel 5.15 brings lots of exciting new features.
November 02, 2021 by George Kiagiadakis | News & Events
Today marks a very exciting day as Fedora 35 has now been released, and with it comes WirePlumber as the default session manager for PipeWire! Under development by Collabora since 2019, WirePlumber has now entered the linux desktop space.
October 26, 2021 by Xavier Claessens | Blog
Maintaining a non-trivial set of GStreamer patches can be tricky. Thanks to the recent move to a single, unified git repo, you can now easily run a GStreamer continuous integration pipeline on your own GitLab instance. Here's how.
October 08, 2021 by Nícolas F. R. A. Prado | Blog
Earlier this year, I joined Collabora as an intern to work on improving testing in libcamera and automating it through KernelCI. Having recently completed the internship, here's a look back at this experience and what was accomplished.
September 30, 2021 by Adrian Ratiu | Blog
With the LLVM toolchain seeing increasing development and adoption alongside the older, more established GNU toolchain, projects needing to support both, in particular the GNU C library (glibc), are facing challenges and questions.
September 24, 2021 by Mark Filion | News & Events
Collaborans will be actively participating in next week's activities with seven talks on topics including Rust build scripts, embedded deep learning on GStreamer, HEVC decoding on mainline Linux, PipeWire and WirePlumber, and more.
September 21, 2021 by Alyssa Rosenzweig | News & Events
This important milestone is a step forward for the open source driver, as it now certifies Panfrost for use in commercial products containing Mali G52 and paves the way for further conformance submissions on other Mali GPUs.
September 16, 2021 by Stéphane Cerveau | News & Events
GStreamer can be tricky to ship in a constrained device. Thanks to a partnership with Huawei, you can now use gst-build to generate a minimal GStreamer build, tailored to a specific application, or set of applications. Here's how.
April 19, 2017 by Olivier Crête | Blog
With GStreamer 1.12's first release candidate out for testing and the final release expected soon, here's a brief preview of some of the (many) new features, bugfixes and improvements that will be arriving with this release.
April 10, 2017 by Gabriel Krisman Bertazi | Blog
Like the bug that no one can solve, many issues occur on the interface between the user application and the operating system. But even in the good Open Source world, understanding what is happening at these interfaces is not always easy.
April 05, 2017 by Daniel Stone | Blog
Today we all read the announcement of Ubuntu's decision to refocus on cloud and IoT activities, dropping Unity 8 to move back to a GNOME-based desktop for the 17.04 LTS.
March 29, 2017 by Robert Foss | Blog
Android uses the HWC API to communicate with graphics hardware. This API is not supported on the mainline Linux graphics stack, but by using drm_hwcomposer as a shim it now is.
March 28, 2017 by Gabriel Krisman Bertazi | Blog
Like starting a car with the hood open, sometimes you need to run your program with certain analysis tools attached to get a full sense of what is going wrong – or right.
March 24, 2017 by Simon McVittie | Blog
At the GTK hackfest in London (which accidentally became mostly a Flatpak hackfest) I've mainly been looking into how to make D-Bus work better for app container technologies like Flatpak and Snap.
March 21, 2017 by Gabriel Krisman Bertazi | Blog
Modern CPUs implement a number of technologies that may affect application performance in unpredictable ways. Figuring out what is going wrong with an application can be a hard task, but it can become much easier with the correct analysis tools.
March 13, 2017 by Frédéric Dalleau | Blog
Once you've setup a virtual machine in QEMU using debootstrap, there are a number of tools available for testing, tracing and debugging, such as Kmemleak for memory leaks, GDB (GNU Debugger), ftrace et dynamic_debug.
March 08, 2017 by Robert Foss | Blog
Before being able to write firmware data to any production Chromebook device, the Write-Protect screw has to be removed.
March 01, 2017 by Daniel Stone | Blog
The past few months have been busy ones on the open-source graphics front, bringing with them Wayland 1.13, Weston 2.0 and Mesa 17.0. Here's a look at some of these developments, including Collabora's behind-the-scenes work on performance improvement.
February 23, 2017 by Robert Foss | Blog
How to create your custom Android image, and APK app(s), all at once.
February 16, 2017 by Robert Foss | Blog
How to set up a fully functional ChromiumOS development environment on actual Chromebook hardware.
May 29, 2020 by Jakob Bornecrantz | News & Events
With the excellent (online) edition of Augmented World Expo 2020 in full swing this week, what better time to announce version 0.2 of the Monado OpenXR runtime for Linux. It's been a very busy three months since the last Monado developer update!
May 18, 2020 by Mark Filion | News & Events
A few weeks ago, Ryan Pavlik presented "Unifying Reality: Building Experiences with OpenXR", a master class on OpenXR, the open standard API for building VR and AR experiences that work across devices, now and into the future.
May 08, 2020 by Lubosz Sarnecki | News & Events
Sponsored by Valve, this latest release of the Open Source project which enables interaction with traditional desktop environments, such as GNOME and KDE, in VR, brings the largest amount of changes yet, with many new features and architectural improvements.
April 30, 2020 by Lubosz Sarnecki | News & Events
A new monado-service binary and out of process compositor has landed in Monado, the fully Open Source OpenXR runtime for Linux! Here's a demo of the compositor's new abilities running with the new Blender OpenXR VR Session.
April 21, 2020 by Erica Ryoo | News & Events
In these times of disruption and uncertainty, how about some positive news for a change? Let's take a moment to celebrate the newest members of our engineering and administration teams: Mylène, Christopher, Melissa, Ricardo and Leandro!
March 31, 2020 by Helen Koike | News & Events
Despite the challenges presented by COVID-19, Linux kernel development continues. Here's a look at the various projects Collaborans have been involved in, and the progress made in kernel 5.6, which was released over the weekend.
March 30, 2020 by Mark Filion | News & Events
This week, Daniel Stone and Tomeu Vizoso will be taking part in Linaro Tech Days, a series of technical sessions presented live online via Zoom webinar and streamed on YouTube. These sessions are free to attend and open to the public!
March 24, 2020 by Erik Faye-Lund | News & Events
Today, Collabora is excited to announce a partnership with Microsoft to build OpenCL and OpenGL mapping layers on DirectX, in order to bring OpenCL 1.2 and OpenGL 3.3 support to all Windows and DirectX 12 enabled devices.
February 25, 2020 by Jakob Bornecrantz | News & Events
Ever since announcing the project at GDC 2019, we have been working on improving the full open source XR stack to a usable state. Today, we are very happy to tag version 0.1 of the Monado OpenXR runtime for Linux!
February 12, 2020 by Jakub Adam | News & Events
With the advent of 5G networks, it's now possible to stream high quality video in real-time with a very low latency that wasn't possible with the past generations of mobile networks.
January 30, 2020 by Sebastian Reichel | News & Events
With the 5.5 kernel released earlier this week, here's a detailed look at Collabora’s contributions, including work to improve upstream support of peripherals used together with the i.MX 6 family of processors.
January 23, 2020 by Mark Filion | News & Events
In less than 10 days, Collabora will be in Brussels to take part in this year's edition of FOSDEM! Come say hello, or catch one of the dozen talks (in the main track and 6 different devrooms) given by Collaborans!
Here are the events we'll be attending in the coming weeks – come say hello!
June 30-July 4, Nantes, France
July 9-10, Berlin, Germany
July 14-20, Brest, France
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português