News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

Bridging the synchronization gap on Linux

June 09, 2022 by Faith Ekstrand  |   Blog

After fighting with the divide between implicit and explicit synchronization with Vulkan on Linux for over seven years, we may finally have some closure. We're not to synchronization nirvana quite yet, but this is an important step along the way.

Bridging the synchronization gap on Linux

Conformant open source support for Mali-G57

June 06, 2022 by Alyssa Rosenzweig  |   News & Events

Mali-G57 features in new MediaTek Chromebooks with the MT8192 and MT8195 system-on-chips. With Mesa 22.2 and an appropriate kernel, accelerated graphics will work out of the box on Linux on these laptops.

Conformant open source support for Mali-G57

Kernel 5.18: Milestones for the road ahead

June 02, 2022 by Dmitry Osipenko  |   News & Events

Released by Linus Torvalds on May 22 after a busy two-month development cycle, Linux kernel 5.18 brings new features and lights up new hardware. Let's take a look at the contributions made by our engineering team.

Kernel 5.18: Milestones for the road ahead

Monado's hand tracking: hand-waving our way towards a first attempt

May 31, 2022 by Moses Turner  |   Blog

Optical hand tracking for XR has a bit of a reputation - getting training data, training neural nets, and deploying them in real-time, low-latency environments such as XR is every bit as hard as they say it is.

Monado's hand tracking: hand-waving our way towards a first attempt

Finding the secret ingredient at Embedded and Kernel Recipes

May 26, 2022 by Kara Bembridge  |   News & Events

After a two-year hiatus, the City of Lights is shinning brightly again to welcome the community for a full week of engaging talks at Embedded Recipes and Kernel Recipes conferences.

Finding the secret ingredient at Embedded and Kernel Recipes

Talks of the town: Software engineering edition

May 17, 2022 by Kara Bembridge  |   News & Events

Less than a day away, May 18th looks to be a very busy time. With Live Embedded Event and Embedded Vision Summit taking place almost simultaneously, Collabora will be presenting four different talks!

Talks of the town: Software engineering edition

PipeWire: Bluetooth support status update

April 29, 2022 by Frederic Danis  |   News & Events

Over the last two years, Bluetooth® audio support has steadily grown in PipeWire and has become a featureful, stable, conformant, open source Bluetooth® audio stack implementation. Here's a look at where things stand.

PipeWire: Bluetooth support status update

SocketCAN x Kubernetes

April 27, 2022 by Jakub Piotr Cłapa  |   News & Events

Looking to use hardware-backed and virtual SocketCAN interfaces inside your Kubernetes Pods? A new device plugin now allows processes inside a pod to communicate with each other using the full Linux SocketCAN API.

SocketCAN x Kubernetes

Monado accepted in GSoC 2022!

April 06, 2022 by Frédéric Plourde  |   News & Events

Monado has been accepted for the first time as a mentoring organization for the 2022 Google Summer of Code (GSoC)! Collabora will be providing three mentors to support contributors who want to work on Monado-related projects.

Monado accepted in GSoC 2022!

Visual-inertial tracking for Monado

April 05, 2022 by Mateo de Mayo  |   Blog

Monado now has initial support for 6DoF ("inside-out") tracking for devices with cameras and an IMU! Three free and open source SLAM/VIO solutions were integrated and adapted to work on XR: Kimera-VIO, ORB-SLAM3, and Basalt.

Visual-inertial tracking for Monado

Kernel 5.17: Solid & steady

March 31, 2022 by Sebastian Fricke  |   News & Events

While eastern Europe has experienced ghastly events that have shaken the world, the latest Linux kernel release could aptly be named "Solid & Steady." Here's a look at some of the contributions made by Collabora's kernel team.

Kernel 5.17: Solid & steady

Spotlight on Meson's full-featured developer environment

March 30, 2022 by Xavier Claessens  |   Blog

When developing an application or a library, it is very common to want to run it without installing it, or to install it into a custom prefix rather than on the system. Here's how Meson can help with that.

Spotlight on Meson's full-featured developer environment

Collabora contributions to GStreamer 1.10 - Part 2

November 03, 2016 by Olivier Crête  |   Blog

In the first part of my review of Collabora's participation in GStreamer 1.10, I discussed the work done by Guillaume & Nicolas around leak tracing, acoustic echo cancellation, Wayland, V4L, etc. Today, I'll go over the contributions from the rest of…

Collabora contributions to GStreamer 1.10 - Part 2

Collabora contributions to GStreamer 1.10

November 02, 2016 by Olivier Crête  |   Blog

Yesterday, we celebrated the release of GStreamer 1.10, the culmination of 7 months of very hard work from the GStreamer community. Collabora's multimedia team is extremely proud of our contributions to this new major feature release.

Collabora contributions to GStreamer 1.10

Open Build Service in Debian - Part 2

October 25, 2016 by Héctor Orón Martínez  |   Blog

In the previous post, I gave an overview of the Open Build Service software architecture. In this second part, a tutorial on setting up a package build with OBS from Debian packages is presented.

Open Build Service in Debian - Part 2

Open Build Service in Debian - Part 1

October 24, 2016 by Héctor Orón Martínez  |   Blog

openSUSE distributions’ build system is based on a generic framework named Open Build Service (OBS), I have been using these tools in my work environment, and I have to say, as Debian developer, that it is a great tool. In this blog post I plan for you…

Open Build Service in Debian - Part 1

Mainline Explicit Fencing - Part 2

October 18, 2016 by Gustavo Padovan  |   Blog

In the first part we covered the main concepts behind Explicit Synchronization for the Linux Kernel. Now in the second part of the series we are going to look to the Android Sync Framework, the first (out-of-tree) Explicit Fencing implementation for the…

Mainline Explicit Fencing - Part 2

Making Viewer UIs for Pitivi

October 13, 2016 by Lubosz Sarnecki  |   Blog

Being someone who has already experimented with two transformation box approaches for Pitivi in the past, maintainers thought I might be the right person to do a modern one. Creating a user interface for a video transformation requires three things: the…

Making Viewer UIs for Pitivi

Web Engines Hackfest 2016

October 06, 2016 by Gustavo Noronha  |   Blog

I had a great time last week and the Web Engines Hackfest! It was the 7th web hackfest hosted by Igalia and the 7th hackfest I attended. I’m almost a local Galician already. Brazilian Portuguese being so close to Galician certainly helps! Collabora co-sponsored…

Web Engines Hackfest 2016

Collabora contributions to Linux Kernel 4.8

October 03, 2016 by Gustavo Padovan  |   Blog

Linux Kernel 4.8 is out and once more Collabora engineers did a significant contribution to the Kernel. For this latest release, Collabora provided 101 patches from 8 engineers, our biggest contribution to date in single kernel release!

Collabora contributions to Linux Kernel 4.8

WebKitGTK+ 2.14 and the Web Engines Hackfest

September 22, 2016 by Gustavo Noronha  |   Blog

Next week our friends at Igalia will be hosting this year’s Web Engines Hackfest. Collabora will be there! We are gold sponsors, and have three developers attending. It will also be an opportunity to celebrate Igalia’s 15th birthday. Looking forward to…

WebKitGTK+ 2.14 and the Web Engines Hackfest

Mainline Explicit Fencing - Part 1

September 13, 2016 by Gustavo Padovan  |   Blog

When it comes to buffer sharing synchronization in the kernel there are two ways of doing it: Implicit Fencing and Explicit Fencing. The difference between them relies on the fact that the kernel may or may not share synchronization information with userspace,…

Mainline Explicit Fencing - Part 1

Building Android for Qemu: A Step-by-Step Guide

September 02, 2016 by Robert Foss  |   Blog

Developing Linux for Android on Qemu allows you to do some things that are not necessarily possible using the stock emulator. For my purposes I need access to a GPU and be able to modify the driver, which is where Virgilrenderer and Qemu comes in handy.

Building Android for Qemu: A Step-by-Step Guide

Increased performance of emulated NVMe devices

August 23, 2016 by Helen Fornazier  |   Blog

Nowadays, in Google Cloud Engine (GCE), it is possible to attach a local SSD with the NVMe interface to your virtual machine. Unfortunately, you only get a good number of iops (input/output operations per second) if you instantiate a machine with nvme-backports-debian-7-wheezy…

Increased performance of emulated NVMe devices

Conformant open source support for Mali-G57

June 06, 2022 by Alyssa Rosenzweig  |   News & Events

Mali-G57 features in new MediaTek Chromebooks with the MT8192 and MT8195 system-on-chips. With Mesa 22.2 and an appropriate kernel, accelerated graphics will work out of the box on Linux on these laptops.

Conformant open source support for Mali-G57

Kernel 5.18: Milestones for the road ahead

June 02, 2022 by Dmitry Osipenko  |   News & Events

Released by Linus Torvalds on May 22 after a busy two-month development cycle, Linux kernel 5.18 brings new features and lights up new hardware. Let's take a look at the contributions made by our engineering team.

Kernel 5.18: Milestones for the road ahead

Finding the secret ingredient at Embedded and Kernel Recipes

May 26, 2022 by Kara Bembridge  |   News & Events

After a two-year hiatus, the City of Lights is shinning brightly again to welcome the community for a full week of engaging talks at Embedded Recipes and Kernel Recipes conferences.

Finding the secret ingredient at Embedded and Kernel Recipes

Talks of the town: Software engineering edition

May 17, 2022 by Kara Bembridge  |   News & Events

Less than a day away, May 18th looks to be a very busy time. With Live Embedded Event and Embedded Vision Summit taking place almost simultaneously, Collabora will be presenting four different talks!

Talks of the town: Software engineering edition

PipeWire: Bluetooth support status update

April 29, 2022 by Frederic Danis  |   News & Events

Over the last two years, Bluetooth® audio support has steadily grown in PipeWire and has become a featureful, stable, conformant, open source Bluetooth® audio stack implementation. Here's a look at where things stand.

PipeWire: Bluetooth support status update

SocketCAN x Kubernetes

April 27, 2022 by Jakub Piotr Cłapa  |   News & Events

Looking to use hardware-backed and virtual SocketCAN interfaces inside your Kubernetes Pods? A new device plugin now allows processes inside a pod to communicate with each other using the full Linux SocketCAN API.

SocketCAN x Kubernetes

Monado accepted in GSoC 2022!

April 06, 2022 by Frédéric Plourde  |   News & Events

Monado has been accepted for the first time as a mentoring organization for the 2022 Google Summer of Code (GSoC)! Collabora will be providing three mentors to support contributors who want to work on Monado-related projects.

Monado accepted in GSoC 2022!

Kernel 5.17: Solid & steady

March 31, 2022 by Sebastian Fricke  |   News & Events

While eastern Europe has experienced ghastly events that have shaken the world, the latest Linux kernel release could aptly be named "Solid & Steady." Here's a look at some of the contributions made by Collabora's kernel team.

Kernel 5.17: Solid & steady

School's back in session at Open Source 101

March 24, 2022 by Kara Bembridge  |   News & Events

Join us next week for Open Source 101, a one-day conference where we'll dive into the latest around FOSS virtual & augmented reality, and look at the implications of enabling automated testing upstream.

School's back in session at Open Source 101

Portable Linux gaming with the Steam Deck

March 01, 2022 by Simon McVittie  |   News & Events

Congratulations to Valve on the release of the Steam Deck, their new handheld gaming PC! With it comes a new release of SteamOS, complete with a brand new A/B design for seamless system updates.

Portable Linux gaming with the Steam Deck

New faces for new challenges

February 28, 2022 by Kara Bembrirdge  |   News & Events

As the globe still navigates the twists and turns of the times, Collabora can confidently say we've been steadily on the rise. We've added brand new members to our crew who are more than equipped to keep pace.

New faces for new challenges

GStreamer 1.20: Embedded & WebRTC lead the way

February 18, 2022 by Olivier Crête  |   News & Events

At the forefront of contributors for this latest release, our team's work focused on two areas in which we believe GStreamer shines the brightest: embedded systems, and network streaming, in particular WebRTC.

GStreamer 1.20: Embedded & WebRTC lead the way

Search the newsroom

Upcoming Events

Here are the events we'll be attending in the coming weeks – come say hello!

OpenXR Winter F2F

February 26-29, Seattle, WA, USA
 

Embedded World

April 9-11, Nuremberg, Germany

 

Featured Video

Open Since 2005 logo

We use cookies on this website to ensure that you get the best experience. By continuing to use this website you are consenting to the use of these cookies. To find out more please follow this link.

Collabora Ltd © 2005-2024. All rights reserved. Privacy Notice. Sitemap.