October 10, 2018 by Martyn Welch | Blog
Like all software, Open Source software isn't without it's bugs and issues. However, thanks to the nature of Open Source, resolving or mitigating the issue you encountered can be quite the satisfying adventure when it comes to scratching the itch.
October 02, 2018 by Lucas Kanashiro | Blog
Last month, the first "MicroDebConf" took place at the Gama campus of the University of Brasilia. Here's a look at how this one day event came to be, and what was accomplished during that day.
September 20, 2018 by Mark Filion | News & Events
Next week, Collaborans will be heading to Paris, A Coruña & Berlin, to sponsor and speak at four different conferences: Embedded Recipes, Kernel Recipes, All Systems Go and XDC 2018. See you there?
September 18, 2018 by Ezequiel Garcia | Blog
When working on the Linux Kernel, testing via QEMU is pretty common. Here's a look at virtme, a QEMU wrapper that uses the host instead of a virtual disk, making working with QEMU extremely easy.
September 10, 2018 by Mark Filion | News & Events
From September 14 to 18, Collabora will be exhibiting at the IBC Show 2018, the "world's most influential media, entertainment and technology show"! If you are planning on attending, please make sure to stop by our booth, D-15 in Hall 14!
August 30, 2018 by Maxime Buquet | Blog
Earlier this month, Collabora sponsored & hosted the XMMP Sprint, the first developer event in the XMPP community in a long time. Here's a look at what was accomplished over the weekend, and what's next for this open standard.
August 29, 2018 by Guillaume Tucker | Blog
In addition to Collabora's work to add support in mainline Linux kernel for several Chromebooks, these platforms are now being continuously tested as part of kernelci.org. Here's how to set them up for kernel development & automated testing with LAVA.
August 28, 2018 by Mark Filion | News & Events
Starting tomorrow, Collaborans will be in beautiful British Columbia to take part, and speak, in this year's Open Source Summit North America! If you are planning on attending, come say hello or catch one of our presentations!
August 27, 2018 by Robert Foss | Blog
Working with a git based project that has a defacto upstream repository means that you perioducally want to fetch the canonical master branch. This can be simplified with a .gitconfig alias.
August 21, 2018 by Emil Velikov | Blog
A look at the work and motivation behind implementing the Khronos EGLDevice extensions in Mesa. These extensions allow users of open source graphics drivers to cleanly describe & select which device to use in heterogeneous systems.
August 13, 2018 by Ezequiel Garcia | News & Events
Another two months and a half have passed, Linux Kernel v4.18 has been released, which means it's time to stop along the way and make a little retrospective. This time around, seven Collaborans have contributed to the kernel, authoring 61 commits.
August 03, 2018 by Corentin Noël | Blog
GNOME Builder is an Integrated Development Environment designed for the GNOME ecosystem. It most notably features a deep integration to the Git version control system, allow to debug applications quickly and allow in-line documentation viewing.
September 23, 2017 by Guy Lunardi | Blog
Many thanks to Google for recording all the XDC2017 talks. To make them easier to watch, here are direct links to each talk recorded at XDC2017.
August 17, 2017 by Simon McVittie | Blog
Last week, I attended DebConf 17 in Montréal, returning to DebConf for the first time in 10 years (last time was DebConf 7 in Edinburgh). It was great to put names to faces and meet more of my co-developers in person!
July 24, 2017 by Robert Foss | Blog
More progress is being made in the area of i.MX6, etnaviv and Android. Since the last post a lot work has gone into upstreaming and stabilizing the etnaviv on Android ecosystem. This has involved Android, kernel and Mesa changes, many of which are available…
July 18, 2017 by Alexandros Frantzis | Blog
Ever since Vulkan was announced a few years ago, the idea of creating a Vulkan benchmarking tool in the spirit of glmark2 had been floating in my mind. Recently, thanks to my employer, Collabora, this idea has materialized! The result is the vkmark Vulkan…
June 29, 2017 by Robert Foss | Blog
Debugging graphics performance in a simple and high-level manner is possible for all Gallium based Mesa drivers using GALLIUM_HUD, a feature that adds performance graphs to applications.
June 20, 2017 by Sjoerd Simons | Blog
At Collabora one of the many things we do is build Debian derivatives/overlays for customers on a variety of architectures including 32 bit and 64 bit ARM systems. And just as Debian does, our OBS system builds on native systems rather than emulators.
June 13, 2017 by Helen Koike | Blog
The feature to improve NVMe performance over emulated environments has now been officially released in the NVMe Specification Revision 1.3 under the name "Doorbell Buffer Config command", along with an implementation in the mainline Linux kernel!
June 05, 2017 by Robert Foss | Blog
GPUs like Intel and Vivante support storing contents of graphical buffers in different formats. Support for describing these formats using modifiers has now been added to Android and Mesa, enabling tiling artifact free running of Android on the iMX6 platform.
May 04, 2017 by Olivier Crête | Blog
Along with the usual load of memory leaks, crashes and other bugs, Collabora's multimedia team once again contributed a number of improvements across a wide number of areas.
April 27, 2017 by Robert Foss | Blog
Getting Android up and running on the iMX6 platform using an open source graphics stack has been impossible up until recently, but now you can. Here's a guide through the steps.
April 25, 2017 by Olivier Crête | Blog
With GStreamer you can easily receive a AES67 stream, the standard which allows inter-operability between different IP based audio networking systems and transfers of live audio between profesionnal grade systems.
April 21, 2017 by Robert Foss | Blog
If you're looking to change the Android boot animation to something other than the stock one, here's a hands-on guide to help you to do it.
January 16, 2020 by Erica Ryoo | News & Events
What better way to start the new year than by highlighting the newest members of our engineering and administrative teams who joined in Q4 2019! Please join us in welcoming Antonio, Afonso, Narciso and Eleni!
December 02, 2019 by Enric Balletbò i Serra | News & Events
Linus has released the 5.4 kernel and Collabora was once again a very active contributor with 12 Collaborans authoring 95 commits while also helping the kernel maintainers by contributing 124 Reviewed-by tags.
November 20, 2019 by Jassie Badion | News & Events
As we begin winding down 2019, it's time to take a moment to celebrate the new Collaborans who joined our various engineering and administrative teams in Q2 & Q3 this year!
October 30, 2019 by Mark Filion | News & Events
Following three days at ELCE, Collaborans are continuing their stay in the capital of France’s Auvergne-Rhône-Alpes region to take part the annual GStreamer Conference, as well as the Automated Testing Summit.
October 28, 2019 by Guillaume Tucker | News & Events
The KernelCI project, which powers kernelci.org with automated testing for the upstream Linux kernel, has found a new home after sailing through uncharted waters for over five years.
October 25, 2019 by Mark Filion | News & Events
Next week, Collabora will be sponsoring, exhibiting & speaking at ELCE in Lyon, France. We'll be showcasing not one but two demos at our booth this year: arcade racing on a ROCK Pi 4 with Panfrost, and GStreamer on the Magic Leap One.
September 30, 2019 by Mark Filion | News & Events
Collabora is proud to be hosting in Montreal the 2019 edition of the X.Org Developer's Conference (XDC), the leading event for developers working on all things Open graphics, including the Linux kernel, Mesa, DRM, Wayland and X11.
September 20, 2019 by Mark Filion | News & Events
Next week, Collaborans including Julian Bouzas and Enric Balletbò i Serra will be in Paris to participate in the 3rd edition of Embedded Recipes and 8th edition of Kernel Recipes
September 19, 2019 by Boris Brezillon | News & Events
Linux 5.3 was released over the weekend, which means it's time for our usual "where does Collabora stand in this picture?" tour. As has been the case for several years now, Collabora continues being an active contributor to the Linux kernel.
September 12, 2019 by Mark Filion | News & Events
Showcasing two brand new Open Source software demonstrations featuring the Xilinx high-performance Zynq UltraScale+ MPSoC, and the Magic Leap One augmented reality headset.
September 06, 2019 by Joey Ferwerda | News & Events
With the recent release of the OpenXR 1.0 specification, the presence of numerous Open Source platforms for Virtual Reality and Augmented Reality, and a growing community of developers, the need for a collaborative Open Source XR Conference became clear.
August 20, 2019 by Mark Filion | News & Events
Starting tomorrow, Collabora will be exhibiting & speaking at Embedded Linux Conference North America (ELCNA), the premier vendor-neutral technical conference for companies and developers using embedded Linux.
Here are the events we'll be attending in the coming weeks – come say hello!
June 10-13, Hamburg, Germany
June 10-12, Long Beach, USA
June 11-13, Orlando, USA
June 30-July 4, Nantes, France
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português