September 30, 2021 by Adrian Ratiu | Blog
With the LLVM toolchain seeing increasing development and adoption alongside the older, more established GNU toolchain, projects needing to support both, in particular the GNU C library (glibc), are facing challenges and questions.
September 24, 2021 by Mark Filion | News & Events
Collaborans will be actively participating in next week's activities with seven talks on topics including Rust build scripts, embedded deep learning on GStreamer, HEVC decoding on mainline Linux, PipeWire and WirePlumber, and more.
September 21, 2021 by Alyssa Rosenzweig | News & Events
This important milestone is a step forward for the open source driver, as it now certifies Panfrost for use in commercial products containing Mali G52 and paves the way for further conformance submissions on other Mali GPUs.
September 16, 2021 by Stéphane Cerveau | News & Events
GStreamer can be tricky to ship in a constrained device. Thanks to a partnership with Huawei, you can now use gst-build to generate a minimal GStreamer build, tailored to a specific application, or set of applications. Here's how.
September 10, 2021 by Lubosz Sarnecki | Blog
This summer, Christoph Haag and I had the pleasure of taking part in Google Summer of Code as mentors for xrdesktop, the Open Source project bringing the Linux desktop to VR on Valve's SteamVR & Monado. Here's what was accomplished.
September 07, 2021 by Nícolas F. R. A. Prado | News & Events
With an ever-increasing interest in more modern hardware support, and a more reliable kernel that is thoroughly tested, contributions by Collabora's developers continue to help make this a reality for the Linux kernel.
September 01, 2021 by Mark Filion | News & Events
September's busy conference schedule kicks off next week with the Fall edition of Linaro Virtual Connect. Join us as we look at how to master your PipeWire streams with WirePlumber, and de-mystify GFX virtualization with VirGL!
July 20, 2021 by Alyssa Rosenzweig | News & Events
After a month of reverse-engineering the Arm Mali G78, we’re excited to release documentation on the Valhall instruction set, available as a PDF, as well as a Valhall assembler and disassembler to be used as a reverse-engineering aid.
July 08, 2021 by Gabriel Krisman Bertazi | News & Events
Collabora's team working directly on the Linux kernel is growing. Collaborans continue to expand on their efforts to close the gap between hardware support on vendor trees and mainline.
June 23, 2021 by Daniel Almeida | Blog
Earlier this year, from January to April 2021, I worked on adding support for stateless decoders for GStreamer as part of a multimedia internship at Collabora. Here's a recap of this completed work.
June 21, 2021 by Shreeya Patel | News & Events
Earlier this month, Collabora took part in the very first KernelCI hackfest, initiated as a joint effort with the Google Chrome OS team. Here's a look at what led to our participation and what was accomplished.
June 21, 2021 by Erica Ryoo | News & Events
Despite the many obstacles brought on by the pandemic, Collabora has continued to grow its teams for the road ahead. Join us in welcoming Kiril, Benjamin, Daniel, Shreeya, Ariel, Nicolas and James!
April 27, 2017 by Robert Foss | Blog
Getting Android up and running on the iMX6 platform using an open source graphics stack has been impossible up until recently, but now you can. Here's a guide through the steps.
April 25, 2017 by Olivier Crête | Blog
With GStreamer you can easily receive a AES67 stream, the standard which allows inter-operability between different IP based audio networking systems and transfers of live audio between profesionnal grade systems.
April 21, 2017 by Robert Foss | Blog
If you're looking to change the Android boot animation to something other than the stock one, here's a hands-on guide to help you to do it.
April 19, 2017 by Olivier Crête | Blog
With GStreamer 1.12's first release candidate out for testing and the final release expected soon, here's a brief preview of some of the (many) new features, bugfixes and improvements that will be arriving with this release.
April 10, 2017 by Gabriel Krisman Bertazi | Blog
Like the bug that no one can solve, many issues occur on the interface between the user application and the operating system. But even in the good Open Source world, understanding what is happening at these interfaces is not always easy.
April 05, 2017 by Daniel Stone | Blog
Today we all read the announcement of Ubuntu's decision to refocus on cloud and IoT activities, dropping Unity 8 to move back to a GNOME-based desktop for the 17.04 LTS.
March 29, 2017 by Robert Foss | Blog
Android uses the HWC API to communicate with graphics hardware. This API is not supported on the mainline Linux graphics stack, but by using drm_hwcomposer as a shim it now is.
March 28, 2017 by Gabriel Krisman Bertazi | Blog
Like starting a car with the hood open, sometimes you need to run your program with certain analysis tools attached to get a full sense of what is going wrong – or right.
March 24, 2017 by Simon McVittie | Blog
At the GTK hackfest in London (which accidentally became mostly a Flatpak hackfest) I've mainly been looking into how to make D-Bus work better for app container technologies like Flatpak and Snap.
March 21, 2017 by Gabriel Krisman Bertazi | Blog
Modern CPUs implement a number of technologies that may affect application performance in unpredictable ways. Figuring out what is going wrong with an application can be a hard task, but it can become much easier with the correct analysis tools.
March 13, 2017 by Frédéric Dalleau | Blog
Once you've setup a virtual machine in QEMU using debootstrap, there are a number of tools available for testing, tracing and debugging, such as Kmemleak for memory leaks, GDB (GNU Debugger), ftrace et dynamic_debug.
March 08, 2017 by Robert Foss | Blog
Before being able to write firmware data to any production Chromebook device, the Write-Protect screw has to be removed.
October 07, 2024 by Kara Bembridge | News & Events
XDC kicks off October 9 and we have 7 talks to share with the community! Join us as we share the latest news on open source graphics.
October 03, 2024 by Kara Bembridge | News & Events
For the first time in over a decade, the GStreamer Conference will be taking place in North America, and we're prepped and ready with no less than 10 talks to share! Catch the latest developments and AI advancements for this multimedia framework.
September 19, 2024 by Shreeya Patel | News & Events
The latest 6.11 kernel release is here! This release improves performance, security, and hardware compatibility, increasing the kernel's flexibility and efficiency for various computing environments.
September 18, 2024 by Erik Faye-Lund | News & Events
It is now possible to start kicking the tires on Vulkan with an open source driver on Arm Mali-G610 and Mali-G310 GPUs. The Panfrost project continues to grow!
September 16, 2024 by Kara Bembridge | News & Events
Collabora will be in Vienna for the Media Summit, Open Source Summit Europe, and Linux Plumbers! Catch one of our many talks.
September 13, 2024 by Kara Bembridge | News & Events
As guests at the STMicroelectronics booth, Collabora will be demonstrating how the STM32MP2 chip is perfectly suited for enabling edge AI solutions in industrial environments.
August 29, 2024 by Kara Bembridge | News & Events
Collabora is headed to Amsterdam for IBC! Drop by to see our work on the DAB protocol, our integration of LCEVC, and our latest XR project, ElectricMaple.
July 24, 2024 by Deborah Brouwer | News & Events
OpenQA is a tool for functional, end-to-end testing of operating system distributions. Earlier this year, Collabora undertook a project, sponsored by Meta, to reproduce Fedora’s openQA deployment in the AWS cloud.
July 18, 2024 by Sebastian Reichel | News & Events
The latest kernel 6.10 release brings multiple core changes and updates to BH workqueues. Let's examine the developments implemented by Collabora's engineers.
July 15, 2024 by Eric Smith | News & Events
The Panthor kernel driver and Mesa Panfrost driver combination has achieved official conformance for OpenGL ES 3.1 on the Mali-G610 chip, ensuring reliable performance for users on Mesa version 24.1.1.
June 19, 2024 by Mark Filion | News & Events
Making its debut this week at Augmented World Expo (AWE) in Long Beach, ElectricMaple is an innovative, open source project by Collabora and PlutoVR designed to enhance standalone XR experiences through remote-rendering.
May 30, 2024 by Kara Bembridge | News & Events
Join us at Augmented World Expo for a first-hand look at our recent XR work including ElectricMaple remote rendering, and xrdesktop showcasing a fully open-source 3-window desktop configuration with gaze-driven window selection.
Here are the events we'll be attending in the coming weeks – come say hello!
October 7-10, Montreal, Quebec
October 9-11, Montreal, Quebec
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português