News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

Writing an open source GPU driver – without the hardware

January 27, 2022 by Alyssa Rosenzweig  |   Blog

Until now, no Valhall devices (Mali-G57, Mali-G78) ran mainline Linux - whilst this made driver development obviously difficult, there’s no better time to write drivers than before the devices even get into the hands of end users.

Writing an open source GPU driver – without the hardware

A Pixel's Color & new documentation repository

January 25, 2022 by Pekka Paalanen  |   Blog

My work on Wayland and Weston color management and HDR support has been full of learning new concepts and terms. Many of them are crucial for understanding how color works, and what the values in a pixel actually mean.

A Pixel's Color & new documentation repository

Kernel 5.16: A new release for a new year

January 20, 2022 by André Almeida  |   News & Events

With kernel 5.16, the community has once again produced a release full of great features, including two projects that had been in development for some time by our kernel team: the new futex syscall and the new fanotify event.

Kernel 5.16: A new release for a new year

First up in 2022: linux.conf.au!

January 11, 2022 by Mark Filion  |   News & Events

The new year has only just begun, and already our first conference of 2022 is on the horizon. Join us at linux.conf.au, as we discuss bringing WebM Alpha support to GStreamer, and provide a status update on the futex2 syscall.

First up in 2022: linux.conf.au!

Wine on Wayland year-end update: improved functionality & stability

December 22, 2021 by Alexandros Frantzis  |   Blog

It has been just over a year since we first announced our effort to implement a Wayland driver for Wine. Here's a recap of what has been done since then to improve both the functionality and stability of the driver.

Wine on Wayland year-end update: improved functionality & stability

A growth year for upstream kernel contributions

December 22, 2021 by Gustavo Padovan  |   News & Events

With over 350 patches authored and nearly 200 reviewed and tested in multiple subsystems, 2021 was a great year for Linux kernel development at Collabora. Here is a look at some of our achievements during the year.

A growth year for upstream kernel contributions

Meet wxrd, a standalone Wayland compositor for xrdesktop

December 20, 2021 by Christoph Haag  |   News & Events

The Linux desktop in VR goes headless! Introducing wxrd, a standalone Wayland compositor for xrdesktop based on wlroots, with minimal dependencies.

Meet wxrd, a standalone Wayland compositor for xrdesktop

Open Source in Japan, virtually

December 08, 2021 by Mark Filion  |   News & Events

A year of online conferences that began with linux.conf.au will end on a high note next week as Collaborans present three talks at Open Source Summit Japan + Automotive Linux Summit 2021. Join us!

Open Source in Japan, virtually

Venus on QEMU: Enabling the new virtual Vulkan driver

November 26, 2021 by Antonio Caggiano  |   Blog

A step-by-step guide on how to enable 3D acceleration of Vulkan applications in QEMU through the new Venus experimental Vulkan driver for VirtIO-GPU with a local development environment.

Venus on QEMU: Enabling the new virtual Vulkan driver

Kernel 5.15: A small but mighty Halloween release

November 10, 2021 by Sebastian Reichel  |   News & Events

It might be smaller than the last few kernels, but with well above 10,000 non-merge changes, the latest Linux kernel release still packs a punch. Released on October 31, kernel 5.15 brings lots of exciting new features.

Kernel 5.15: A small but mighty Halloween release

WirePlumber in Fedora 35

November 02, 2021 by George Kiagiadakis  |   News & Events

Today marks a very exciting day as Fedora 35 has now been released, and with it comes WirePlumber as the default session manager for PipeWire! Under development by Collabora since 2019, WirePlumber has now entered the linux desktop space.

WirePlumber in Fedora 35

Run your own CI pipeline with GStreamer's new monorepo

October 26, 2021 by Xavier Claessens  |   Blog

Maintaining a non-trivial set of GStreamer patches can be tricky. Thanks to the recent move to a single, unified git repo, you can now easily run a GStreamer continuous integration pipeline on your own GitLab instance. Here's how.

Run your own CI pipeline with GStreamer's new monorepo

Open Source OpenGL ES 3.1 on Mali GPUs with Panfrost

June 11, 2021 by Alyssa Rosenzweig  |   Blog

Panfrost, the open source driver for Arm Mali, now supports OpenGL ES 3.1 on both Midgard (Mali T760 and newer) and Bifrost (Mali G31, G52, G72) GPUs, adding a number of features, notably including compute shaders.

Open Source OpenGL ES 3.1 on Mali GPUs with Panfrost

Optimizing 3D performance with virglrenderer

May 17, 2021 by Gert Wollny  |   Blog

Collabora has been investing into Perfetto to enable driver authors & users to get deep insights into driver internals and GPU performance. Here's how we applied this work to study workloads on the virtualized VirGL implementation.

Optimizing 3D performance with virglrenderer

Mainline Linux gains accelerated video decoding for Microchip's SAMA5D4

May 11, 2021 by Emil Velikov  |   Blog

The Hantro Video4Linux2 (V4L2) kernel module has gained support for another SoC! The Microchip SAMA5D4 features a single decode unit supporting MPEG2, VP8 and H.264 streams, alongside the built-in post-processing unit.

Mainline Linux gains accelerated video decoding for Microchip's SAMA5D4

Quick hack: Patching kernel modules using DKMS

May 05, 2021 by Frederic Danis  |   Blog

DKMS is a framework that is mostly used to build and install external kernel modules. It can also be used to install a specific patch to the modules of the current kernel, such as applying a specific fix to the Bluetooth USB subsystem.

Quick hack: Patching kernel modules using DKMS

Build your own application with GTK 4 as a Meson subproject!

April 29, 2021 by Xavier Claessens  |   Blog

Building GTK 4 as a Meson subproject for your own application is not only useful for Windows builds, but also for many Linux distributions that do not yet package a recent enough version of GTK 4 and/or its dependencies.

Build your own application with GTK 4 as a Meson subproject!

Profiling virtualized GPU acceleration with Perfetto

April 22, 2021 by Antonio Caggiano  |   Blog

Recently, we have been using Perfetto to successfully profile Apitrace traces in crosvm through VirGL renderer. We have now added perfetto instrumentation to VirGL renderer, Mesa, and Apitrace to see what happens precisely in a frame.

Profiling virtualized GPU acceleration with Perfetto

Continuous 3D Hand Pose Tracking using Machine Learning & Monado OpenXR

April 20, 2021 by Marcus Edel  |   Blog

As part of a project backed by INVEST-AI, a program managed by IVADO Labs, we have developed a multi-stage neural network-based solution that accurately locates and tracks the hands despite complex background noise and occlusion between hands.

Continuous 3D Hand Pose Tracking using Machine Learning & Monado OpenXR

An easy to use MTP implementation for your next embedded Linux project

April 13, 2021 by Andrzej Pietrasiewicz  |   Blog

Did you know you could run a permissively-licensed MTP implementation with minimal dependencies on an embedded device? Here's a step-by-step guide on how to easily run cmtp-responder on a Rock Pi 4 or any other board equipped with a UDC.

An easy to use MTP implementation for your next embedded Linux project

Rust: integrating LLVM source-base code coverage with GitLab

March 24, 2021 by Guillaume Desmottes  |   Blog

Earlier this year, the Rust compiler gained support for LLVM source-base code coverage. In this post we'll explain how to setup a CI job in a Rust project to feed source-base coverage information to GitLab.

Rust: integrating LLVM source-base code coverage with GitLab

Build and run GTK 4 applications with Visual Studio

March 18, 2021 by Xavier Claessens  |   Blog

Over the past few months, I've been working on a side project to improve Meson sub-project support. The best stress test is to build projects on Windows, without msys2, because it has no dependencies or tools installed (e.g. pkg-config).

Build and run GTK 4 applications with Visual Studio

New features, changes & improvements to KernelCI's UI

March 04, 2021 by Alexandra Pereira  |   Blog

The most complete automated testing and continuous integration tool for the Linux kernel continues to evolve at a rapid pace. Here's a look at the latest improvements to the KernelCI dashboard, the main web interface used by the project.

New features, changes & improvements to KernelCI's UI

Asymmetric Multi Processing with Linux & Zephyr on the STM32MP1

March 03, 2021 by Arnaud Ferraris  |   Blog

In the embedded world, many modern SoCs such as the ST Microelectronics STM32MP1 now include coprocessor cores which can be used for a wide range of tasks and can offload some of the work from the main processor.

Asymmetric Multi Processing with Linux & Zephyr on the STM32MP1

A new home for KernelCI

October 28, 2019 by Guillaume Tucker  |   News & Events

The KernelCI project, which powers kernelci.org with automated testing for the upstream Linux kernel, has found a new home after sailing through uncharted waters for over five years.

A new home for KernelCI

Embedded Linux Conference Europe 2019

October 25, 2019 by Mark Filion  |   News & Events

Next week, Collabora will be sponsoring, exhibiting & speaking at ELCE in Lyon, France. We'll be showcasing not one but two demos at our booth this year: arcade racing on a ROCK Pi 4 with Panfrost, and GStreamer on the Magic Leap One.

Embedded Linux Conference Europe 2019

Open graphics in Montreal

September 30, 2019 by Mark Filion  |   News & Events

Collabora is proud to be hosting in Montreal the 2019 edition of the X.Org Developer's Conference (XDC), the leading event for developers working on all things Open graphics, including the Linux kernel, Mesa, DRM, Wayland and X11.

Open graphics in Montreal

All the right ingredients in Paris

September 20, 2019 by Mark Filion  |   News & Events

Next week, Collaborans including Julian Bouzas and Enric Balletbò i Serra will be in Paris to participate in the 3rd edition of Embedded Recipes and 8th edition of Kernel Recipes

All the right ingredients in Paris

Linux Kernel 5.3

September 19, 2019 by Boris Brezillon  |   News & Events

Linux 5.3 was released over the weekend, which means it's time for our usual "where does Collabora stand in this picture?" tour. As has been the case for several years now, Collabora continues being an active contributor to the Linux kernel.

Linux Kernel 5.3

Open Source at IBC 2019

September 12, 2019 by Mark Filion  |   News & Events

Showcasing two brand new Open Source software demonstrations featuring the Xilinx high-performance Zynq UltraScale+ MPSoC, and the Magic Leap One augmented reality headset.

Open Source at IBC 2019

Bringing the FOSS XR community together

September 06, 2019 by Joey Ferwerda  |   News & Events

With the recent release of the OpenXR 1.0 specification, the presence of numerous Open Source platforms for Virtual Reality and Augmented Reality, and a growing community of developers, the need for a collaborative Open Source XR Conference became clear.

Bringing the FOSS XR community together

Embedded in San Diego

August 20, 2019 by Mark Filion  |   News & Events

Starting tomorrow, Collabora will be exhibiting & speaking at Embedded Linux Conference North America (ELCNA), the premier vendor-neutral technical conference for companies and developers using embedded Linux.

Embedded in San Diego

Linux Developer Conference Brazil 2019

August 02, 2019 by Mark Filion  |   News & Events

This weekend, Collaborans are in São Paulo, Brazil, to take part in the third edition of Linux Developer Conference Brazil, a conference which aims to take the Brazilian Linux development community to the international level.

Linux Developer Conference Brazil 2019

Moving the Linux desktop to another reality

July 30, 2019 by Lubosz Sarnecki  |   News & Events

Today, we are very excited to announce xrdesktop, a new open source project sponsored by Valve, enabling interaction with traditional Linux desktop environments, such as GNOME and KDE, in VR.

Moving the Linux desktop to another reality

Collabora & Debian 10 (Buster)

July 25, 2019 by Andrej Shadura  |   News & Events

With DebConf19, the annual conference for Debian contributors and users, in full swing this week in Curitiba, Brazil, what better time to look at the contributions made by Collaborans to the latest Debian release!

Collabora & Debian 10 (Buster)

Linux Kernel 5.2

July 17, 2019 by Gabriel Krisman Bertazi  |   News & Events

With 11 engineers authoring, reviewing and testing nearly 170 patches for this latest release, Collabora ranked 8th in the list of most active employers by lines changed, sharing ranks with some of the prominent employers in Linux kernel development.

Linux Kernel 5.2

Search the newsroom

Upcoming Events

Here are the online events we'll be attending in the coming weeks – join us!

linux.conf.au 2022

14-16 January, Online

FOSDEM

5-6 February, Online

Open Since 2005 logo

We use cookies on this website to ensure that you get the best experience. By continuing to use this website you are consenting to the use of these cookies. To find out more please follow this link.

Collabora Ltd © 2005-2022. All rights reserved. Privacy Notice. Sitemap.