May 06, 2025 by Gustavo Noronha | Blog
Gustavo Noronha helps break down C++ and shows how that knowledge can open up new possibilities with Rust.
May 01, 2025 by Kara Bembridge | News & Events
Join us in Stuttgart, Germany for XR EXPO 2025! This two-day event will be the meeting place for the XR community to exchange ideas and explore the latest trends.
April 29, 2025 by George Kiagiadakis | Blog
Configuring WirePlumber on embedded Linux systems can be somewhat confusing. We take a moment to demystify this process for a particular use case.
April 24, 2025 by Martyn Welch | Blog
Collabora's Board Farm demo, showcasing our recent hardware enablement and continuous integration efforts, has undergone serious development over the years. Here's a look at notable changes and improvements made for Embedded World 2025.
April 22, 2025 by Faith Ekstrand | News & Events
As of today, NVK is a conformant Vulkan 1.3 implementation for NVIDIA Maxwell, Pascal, and Volta GPUs, and will be enabled by default starting with Mesa 25.1.
April 17, 2025 by Eleni Katsoula | News & Events
Our commitment to open source extends beyond contributing code. We are dedicated to upholding the highest standards of license compliance throughout our development processes.
April 15, 2025 by Mark Filion | News & Events
This May, Embedded Recipes 2025, co-sponsored by Collabora, heads to Nice, France with talks, workshops, and a PipeWire hackfest, all bookended by the Linux Media Summit and the GStreamer Spring Hackfest!
April 14, 2025 by Erik Faye-Lund | News & Events
PanVK has reached a new milestone, and is now officially conformant with the Vulkan 1.1 specification on the Arm Mali-G610 GPU! The submission was done from the Mesa 25.0.2 release, and covers both armhf as well as aarch64 architectures.
April 10, 2025 by Daniel Stone | News & Events
Three demos. One stand. From end-to-end HDR and a brand-new SoC running PanVK, to NVK and WebGPU out of the box — discover how Collabora pushed open source graphics forward at Embedded World 2025.
April 09, 2025 by Olivier Crête | News & Events
Collabora once again played a key role in the latest release of GStreamer, contributing enhancements such as improved hardware efficiency, support for the MPEG-5 LCEVC codec, and better integration for analytics and machine learning.
March 26, 2025 by Cristian Ciocaltea | News & Events
The kernel release emphasizes the continuing growth and maturity of the Linux ecosystem and delivers new features, improvements, and optimizations that everyone will be eager to explore. See where Collabora's kernel team contributed to this release.
March 26, 2025 by Kara Bembridge | News & Events
Collabora is thrilled to see its partner, Hololight, join the Khronos Group and become an active member of the OpenXR Working Group. We are excited to support their innovative approach and rapid expansion in the XR streaming space.
August 15, 2024 by Faith Ekstrand | Blog
After rigorous debugging, a new unit testing framework was added to the backend compiler for NVK. This is a walkthrough of the steps taken to achieve this.
August 01, 2024 by Laura Nao | Blog
We're reflecting on the steps taken as we continually seek to improve Linux kernel integration. This will include more detail about the tests used to enhance the quality of testing processes and coverage.
June 27, 2024 by Christopher Obbard | Blog
With each board running a mainline-first Linux software stack and tested in a CI loop with the LAVA test framework, the Farm showcased Collabora's recent hardware enablement and Continuous integration (CI) efforts.
June 26, 2024 by Julian Bouzas | Blog
WirePlumber 0.5 arrived recently with many new and essential features including the Smart Filter Policy, enabling audio filters to automatically insert themselves in between client streams and devices.
June 12, 2024 by Andrzej Pietrasiewicz | Blog
Part 3 of the cmtp-responder series with a focus on USB gadgets explores several new elements including a unified build environment with Docker and an example strategy for building and deploying to a target.
June 06, 2024 by Daniel Almeida | Blog
The final installment of a series explaining how Collabora is helping shape the video virtualization story for Chromebooks with a focus on the future plans for cros-libva and cros-codecs.
June 05, 2024 by George Kiagiadakis | Blog
Last week I attended the GStreamer spring hackfest in Thessaloniki to work on the PipeWire GStreamer elements and connect with the community.
May 28, 2024 by Kara Bembridge | Blog
The world of AI has made leaps and bounds from what It once was, but there are still some adjustments required for the optimal outcome. With the help of WhisperLive, VoxAI was able to improve its response time and oratory abilities.
April 25, 2024 by Faith Ekstrand | Blog
While I managed to land support for two extensions, implementing control flow re-convergence in NVK did not go as planned. This is the story of what went wrong and how we fixed it.
March 14, 2024 by Ricardo Cañuelo Navarro | Blog
In continuation with our series about Kernel Integration we'll go into more detail about how regression detection, processing, and tracking can be improved to provide a better service to developers and maintainers.
February 21, 2024 by Eugen Hristev | Blog
Now included in our Debian images & available via our GitLab, you can build a complete, working BL31 (Boot Loader stage 3.1), and replace the closed binary blob with an open-source binary that anyone can compile.
February 19, 2024 by George Kiagiadakis | Blog
Back in 2022, after a series of issues were found in its design, I made the call to rework some of WirePlumber's fundamentals in order to allow it to grow. So where are we now? And what's next? Let's dive in!
November 02, 2021 by George Kiagiadakis | News & Events
Today marks a very exciting day as Fedora 35 has now been released, and with it comes WirePlumber as the default session manager for PipeWire! Under development by Collabora since 2019, WirePlumber has now entered the linux desktop space.
September 24, 2021 by Mark Filion | News & Events
Collaborans will be actively participating in next week's activities with seven talks on topics including Rust build scripts, embedded deep learning on GStreamer, HEVC decoding on mainline Linux, PipeWire and WirePlumber, and more.
September 21, 2021 by Alyssa Rosenzweig | News & Events
This important milestone is a step forward for the open source driver, as it now certifies Panfrost for use in commercial products containing Mali G52 and paves the way for further conformance submissions on other Mali GPUs.
September 16, 2021 by Stéphane Cerveau | News & Events
GStreamer can be tricky to ship in a constrained device. Thanks to a partnership with Huawei, you can now use gst-build to generate a minimal GStreamer build, tailored to a specific application, or set of applications. Here's how.
September 07, 2021 by Nícolas F. R. A. Prado | News & Events
With an ever-increasing interest in more modern hardware support, and a more reliable kernel that is thoroughly tested, contributions by Collabora's developers continue to help make this a reality for the Linux kernel.
September 01, 2021 by Mark Filion | News & Events
September's busy conference schedule kicks off next week with the Fall edition of Linaro Virtual Connect. Join us as we look at how to master your PipeWire streams with WirePlumber, and de-mystify GFX virtualization with VirGL!
July 20, 2021 by Alyssa Rosenzweig | News & Events
After a month of reverse-engineering the Arm Mali G78, we’re excited to release documentation on the Valhall instruction set, available as a PDF, as well as a Valhall assembler and disassembler to be used as a reverse-engineering aid.
July 08, 2021 by Gabriel Krisman Bertazi | News & Events
Collabora's team working directly on the Linux kernel is growing. Collaborans continue to expand on their efforts to close the gap between hardware support on vendor trees and mainline.
June 21, 2021 by Shreeya Patel | News & Events
Earlier this month, Collabora took part in the very first KernelCI hackfest, initiated as a joint effort with the Google Chrome OS team. Here's a look at what led to our participation and what was accomplished.
June 21, 2021 by Erica Ryoo | News & Events
Despite the many obstacles brought on by the pandemic, Collabora has continued to grow its teams for the road ahead. Join us in welcoming Kiril, Benjamin, Daniel, Shreeya, Ariel, Nicolas and James!
June 07, 2021 by Alexandros Frantzis | News & Events
We first announced our work on the driver last December, and posted an update earlier this year. We are now happy to announce a second update for this driver, adding several major features which increase its scope and utility.
June 02, 2021 by Marius Vlad | News & Events
Simplifying AGL's existing Wayland-based graphical stack and avoiding the use of modules that aren't maintained upstream has lead to the creation of a new compositor based on libweston, bringing more reliable and fine-grained system control.
Here are the events we'll be attending in the coming weeks – come say hello!
June 30-July 4, Nantes, France
July 9-10, Berlin, Germany
July 14-20, Brest, France
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português