News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

Outreachy 2017

June 02, 2017 by Mark Filion  |   News & Events

Collabora is proud to once again be sponsoring the latest round (Round 14) of Outreachy internships, which began earlier this week! More specifically, Collabora has chosen to sponsor the Linux kernel projects for the May-August semester.

Outreachy 2017

Three days, two exhibits, three talks

May 30, 2017 by Mark Filion  |   News & Events

Over the next few days, Collabora is very excited to be taking part in three events where we'll be exhibiting as well as giving talks: Augmented World Expo, Automotive Linux Summit and Open Source Summit Japan.

Three days, two exhibits, three talks

VR World, GStreamer, OSS, Vulkanised!

May 16, 2017 by Mark Filion  |   News & Events

On the road again! Collaborans are heading to London, A Coruña & Buenos Aires to attend a VR event, a hackfest, a conference on Open Source systems, and a day of technical sessions on Vulkan! See you there?

VR World, GStreamer, OSS, Vulkanised!

Collabora at GENIVI AMM

May 08, 2017 by Mark Filion  |   News & Events

From May 9 to 11, Collabora will be attending the GENIVI All Member Meeting & Open Community Days: Advancing Connected Vehicles in a Connected World, in Birmingham, UK!

Collabora at GENIVI AMM

Collabora contributions to GStreamer 1.12

May 04, 2017 by Olivier Crête  |   Blog

Along with the usual load of memory leaks, crashes and other bugs, Collabora's multimedia team once again contributed a number of improvements across a wide number of areas.

Collabora contributions to GStreamer 1.12

Collabora & Linux Kernel 4.11

May 01, 2017 by Helen Fornazier  |   News & Events

Linux Kernel 4.11 was released yesterday, and 9 different Collabora developers contributed a total of 44 patches, while also reviewing 22 other patches.

Collabora & Linux Kernel 4.11

Android: Getting up and running on the iMX6

April 27, 2017 by Robert Foss  |   Blog

Getting Android up and running on the iMX6 platform using an open source graphics stack has been impossible up until recently, but now you can. Here's a guide through the steps.

Android: Getting up and running on the iMX6

Receiving an AES67 stream with GStreamer

April 25, 2017 by Olivier Crête  |   Blog

With GStreamer you can easily receive a AES67 stream, the standard which allows inter-operability between different IP based audio networking systems and transfers of live audio between profesionnal grade systems.

Receiving an AES67 stream with GStreamer

Quick hack: Changing the Android boot animation

April 21, 2017 by Robert Foss  |   Blog

If you're looking to change the Android boot animation to something other than the stock one, here's a hands-on guide to help you to do it.

Quick hack: Changing the Android boot animation

GStreamer 1.12: Intel Media SDK support and more

April 19, 2017 by Olivier Crête  |   Blog

With GStreamer 1.12's first release candidate out for testing and the final release expected soon, here's a brief preview of some of the (many) new features, bugfixes and improvements that will be arriving with this release.

GStreamer 1.12: Intel Media SDK support and more

Upcoming events: VR, NAB & Khronos

April 18, 2017 by Mark Filion  |   News and Events

Collaborans are once again hitting the road and will be attending three separate events over the next new two weeks, in London, Las Vegas and Amsterdam

Upcoming events: VR, NAB & Khronos

Tracing user space and OS interactions

April 10, 2017 by Gabriel Krisman Bertazi  |   Blog

Like the bug that no one can solve, many issues occur on the interface between the user application and the operating system. But even in the good Open Source world, understanding what is happening at these interfaces is not always easy.

Tracing user space and OS interactions

Open Source software releases: Q1 2020 recap

April 14, 2020 by Mark Filion  |   Blog

Open Source software development thrives on remote collaboration, and continues to do so in 2020, with multiple projects announcing releases in the first quarter.

Open Source software releases: Q1 2020 recap

Clean, reliable setup for dependency installation

April 10, 2020 by Pekka Paalanen  |   Blog

When you work on a piece of software, you usually want to be able to build and test it manually on your local system, but without compromising your system or destabilizing the distribution provided software.

Clean, reliable setup for dependency installation

Adding mainline Arm Frame Buffer Compression support for Rockchip

April 08, 2020 by Andrzej Pietrasiewicz  |   Blog

Rockchip SoCs, notably the RK3399, are popular in devices such as Chromebooks and single-board computers. Indeed, they bring some interesting features, one of them being the Arm Frame Buffer Compression (AFBC).

Adding mainline Arm Frame Buffer Compression support for Rockchip

Using syzkaller, part 1: Fuzzing the Linux kernel

March 26, 2020 by Andre Almeida  |   Blog

With the code base of the Linux kernel constantly changing and deployed in devices around the world, performing proper testing is crucial. Here's a look at syzkaller, a valuable tool widely adopted by the kernel community to detect bugs in the kernel.

Using syzkaller, part 1: Fuzzing the Linux kernel

Getting started with GStreamer's gst-build

March 19, 2020 by Stéphane Cerveau  |   Blog

GStreamer relies on multiple repositories such as base and good to build its ecosystem, and now owns more than 30 projects in Gitlab. So, a unified tool/build system has always been necessary to build a specified version.

Getting started with GStreamer's gst-build

Why remote working can be good for people, business and environment

March 10, 2020 by Olivier Potin  |   Blog

Here at Collabora, we trust our people to work remotely, we give them full responsibility for their output, and we believe it helps creating an even stronger internal culture and comes with some other positives.

Why remote working can be good for people, business and environment

PipeWire, the media service transforming the Linux multimedia landscape

March 05, 2020 by Julian Bouzas  |   Blog

PipeWire 0.3 was released a few days ago, marking a big step forward in the effort of making this emerging media service the core layer of all multimedia on Linux.

PipeWire, the media service transforming the Linux multimedia landscape

Experimental Panfrost GLES 3.0 support has landed in Mesa

February 27, 2020 by Alyssa Rosenzweig  |   Blog

Panfrost's ES 3.0 support has landed in upstream Mesa and works with a mainline Linux kernel. The support is still early, but if you're feeling adventurous, feel free to give it a try on your favourite ES 3.0 applications and games.

Experimental Panfrost GLES 3.0 support has landed in Mesa

Using gcc sanitisers to get a nasty bug fixed

February 18, 2020 by Andrej Shadura  |   Blog

When a bug surprises you when doing Apertis packaging of a typical vendor code signing tool, it's time to debug it using the compiler's built-in tools.

Using gcc sanitisers to get a nasty bug fixed

FOSDEM 2020 - Recorded presentations (videos)

February 05, 2020 by Mark Filion  |   Blog

From KernelCI's new home, the latest on Zink (OpenGL on Vulkan), OpenXR & Monado, PipeWire in the automotive industry, JPEG2000, and GStreamer on the Magic Leap One, Collaborans gave talks in 6 different devrooms, as well on the main track.

FOSDEM 2020 - Recorded presentations (videos)

Opening up Mali T720

December 20, 2019 by Alyssa Rosenzweig  |   Blog

If you have a device with a Mali T720 or T820 GPU, you’re in luck – your device is now supported in upstream Mesa at feature parity with other GPUs. Get out your Allwinner H6 or Amlogic S912 board, grab the latest Mesa, and enjoy a match of SuperTuxKart!

Opening up Mali T720

New graphing tool for PipeWire debugging

December 09, 2019 by Julian Bouzas  |   Blog

PipeWire, the new and emerging open source framework that aims to greatly improve the exchange and management of audio and video streams inside a Linux system, has seen a number of improvements and bug fixes over the past year.

New graphing tool for PipeWire debugging

Monado: Multi-application support with XR_EXTX_overlay

June 30, 2020 by Lubosz Sarnecki  |   News & Events

The recent improvements in Monado like out of process compositing and multi-layer rendering released with v0.2 prepared the requirements to implement OpenXR's XR_EXTX_overlay extension.

Monado: Multi-application support with XR_EXTX_overlay

Embedded Linux & Open Source take the virtual stage

June 18, 2020 by Mark Filion  |   News & Events

Collabora will be presenting on five separate occasions during the virtual editions of Embedded Linux Conference North America and Open Source Summit North America, taking place later this month.

Embedded Linux & Open Source take the virtual stage

Kernel 5.7: Forging ahead, despite COVID-19

June 04, 2020 by Andrzej Pietrasiewicz  |   News & Events

This latest release is the first to contain development work accomplished amid the lockdown measures. Despite these significant changes, Collaborans have also been steadfast in their contributions, with multiple projects progressing.

Kernel 5.7: Forging ahead, despite COVID-19

Google Summer of Code 2020

June 01, 2020 by Mark Filion  |   News & Events

Coding hss begun for this year's Google Summer of Code (GSoC) projects, announced earlier last month. The 2020 edition selected 1,199 students from 66 countries, to work with 199 mentoring organizations over the course of the summer.

Google Summer of Code 2020

Monado OpenXR runtime development gaining momentum: version 0.2, multi-layer support & more!

May 29, 2020 by Jakob Bornecrantz  |   News & Events

With the excellent (online) edition of Augmented World Expo 2020 in full swing this week, what better time to announce version 0.2 of the Monado OpenXR runtime for Linux. It's been a very busy three months since the last Monado developer update!

Monado OpenXR runtime development gaining momentum: version 0.2, multi-layer support & more!

Laval Virtual: OpenXR master class in VR!

May 18, 2020 by Mark Filion  |   News & Events

A few weeks ago, Ryan Pavlik presented "Unifying Reality: Building Experiences with OpenXR", a master class on OpenXR, the open standard API for building VR and AR experiences that work across devices, now and into the future.

Laval Virtual: OpenXR master class in VR!

xrdesktop 0.14 with OpenXR support is here!

May 08, 2020 by Lubosz Sarnecki  |   News & Events

Sponsored by Valve, this latest release of the Open Source project which enables interaction with traditional desktop environments, such as GNOME and KDE, in VR, brings the largest amount of changes yet, with many new features and architectural improvements.

xrdesktop 0.14 with OpenXR support is here!

Service process and out of process compositing in Monado

April 30, 2020 by Lubosz Sarnecki  |   News & Events

A new monado-service binary and out of process compositor has landed in Monado, the fully Open Source OpenXR runtime for Linux! Here's a demo of the compositor's new abilities running with the new Blender OpenXR VR Session.

Service process and out of process compositing in Monado

Say hello to the newest Collaborans!

April 21, 2020 by Erica Ryoo  |   News & Events

In these times of disruption and uncertainty, how about some positive news for a change? Let's take a moment to celebrate the newest members of our engineering and administration teams: Mylène, Christopher, Melissa, Ricardo and Leandro!

Say hello to the newest Collaborans!

Projects and progress in Linux kernel 5.6

March 31, 2020 by Helen Koike  |   News & Events

Despite the challenges presented by COVID-19, Linux kernel development continues. Here's a look at the various projects Collaborans have been involved in, and the progress made in kernel 5.6, which was released over the weekend.

Projects and progress in Linux kernel 5.6

Linaro Tech Days: Wayland, Weston & Open Source GPU drivers

March 30, 2020 by Mark Filion  |   News & Events

This week, Daniel Stone and Tomeu Vizoso will be taking part in Linaro Tech Days, a series of technical sessions presented live online via Zoom webinar and streamed on YouTube. These sessions are free to attend and open to the public!

Linaro Tech Days: Wayland, Weston & Open Source GPU drivers

Introducing OpenCL and OpenGL on DirectX

March 24, 2020 by Erik Faye-Lund  |   News & Events

Today, Collabora is excited to announce a partnership with Microsoft to build OpenCL and OpenGL mapping layers on DirectX, in order to bring OpenCL 1.2 and OpenGL 3.3 support to all Windows and DirectX 12 enabled devices.

Introducing OpenCL and OpenGL on DirectX

Search the newsroom

Upcoming Events

Here are the online events we'll be attending in the coming weeks – join us!

Embedded Linux Conference North America

29 June — 02 July, Online

Open Source Summit North America

29 June — 02 July, Online

Open Since 2005 logo

We use cookies on this website to ensure that you get the best experience. By continuing to use this website you are consenting to the use of these cookies. To find out more please follow this link.

Collabora Ltd © 2005-2020. All rights reserved. Privacy Notice. Sitemap.