June 20, 2017 by Sjoerd Simons | Blog
At Collabora one of the many things we do is build Debian derivatives/overlays for customers on a variety of architectures including 32 bit and 64 bit ARM systems. And just as Debian does, our OBS system builds on native systems rather than emulators.
June 13, 2017 by Helen Koike | Blog
The feature to improve NVMe performance over emulated environments has now been officially released in the NVMe Specification Revision 1.3 under the name "Doorbell Buffer Config command", along with an implementation in the mainline Linux kernel!
June 05, 2017 by Robert Foss | Blog
GPUs like Intel and Vivante support storing contents of graphical buffers in different formats. Support for describing these formats using modifiers has now been added to Android and Mesa, enabling tiling artifact free running of Android on the iMX6 platform.
June 02, 2017 by Mark Filion | News & Events
Collabora is proud to once again be sponsoring the latest round (Round 14) of Outreachy internships, which began earlier this week! More specifically, Collabora has chosen to sponsor the Linux kernel projects for the May-August semester.
May 30, 2017 by Mark Filion | News & Events
Over the next few days, Collabora is very excited to be taking part in three events where we'll be exhibiting as well as giving talks: Augmented World Expo, Automotive Linux Summit and Open Source Summit Japan.
May 16, 2017 by Mark Filion | News & Events
On the road again! Collaborans are heading to London, A Coruña & Buenos Aires to attend a VR event, a hackfest, a conference on Open Source systems, and a day of technical sessions on Vulkan! See you there?
May 08, 2017 by Mark Filion | News & Events
From May 9 to 11, Collabora will be attending the GENIVI All Member Meeting & Open Community Days: Advancing Connected Vehicles in a Connected World, in Birmingham, UK!
May 04, 2017 by Olivier Crête | Blog
Along with the usual load of memory leaks, crashes and other bugs, Collabora's multimedia team once again contributed a number of improvements across a wide number of areas.
May 01, 2017 by Helen Fornazier | News & Events
Linux Kernel 4.11 was released yesterday, and 9 different Collabora developers contributed a total of 44 patches, while also reviewing 22 other patches.
April 27, 2017 by Robert Foss | Blog
Getting Android up and running on the iMX6 platform using an open source graphics stack has been impossible up until recently, but now you can. Here's a guide through the steps.
April 25, 2017 by Olivier Crête | Blog
With GStreamer you can easily receive a AES67 stream, the standard which allows inter-operability between different IP based audio networking systems and transfers of live audio between profesionnal grade systems.
July 08, 2016 by Nicolas Dufresne | Blog
For a long time I believed that echo cancellers had no place inside GStreamer. The theory was that GStreamer was too high level and would never be able to provide accurate enough delay information for any canceller to work.
July 04, 2016 by Lubosz Sarnecki | Blog
The dawn of VR video players demand new features in terms of projection and hardware access. In his recent R&D work, a Collaboran implemented a way to view spherical videos with GStreamer on a Virtual Reality headset. In this article, he gives his thoughts…
June 27, 2016 by Frédéric Plourde | Blog
I’ve been fortunate enough lately to attend the largest virtual reality professional event/conference : SVVR. This virtual reality conference’s been held each year in the Silicon Valley for 3 years now. This year, it showcased more than 100 VR companies…
June 22, 2016 by Simon McVittie | Blog
I'm back from the GTK hackfest in Toronto, Canada and mostly recovered from jetlag, so it's time to write up my notes on what we discussed there.
June 20, 2016 by Guillaume Desmottes | Blog
At Collabora, our multimedia team is always looking to improve QA tools in GStreamer. This blog introduces a new QA tool: a GStreamer tracer to track leaked objects.
June 10, 2016 by Helen Fornazier | Blog
When the kernel crashes, it's good to know how to analyze the log and to discover exactly where the error occurred. This blog post shows a simple technique to retrieve the buggy line from the addresses shown in the log and also enabling specifics logs…
June 06, 2016 by Simon McVittie | Blog
Quite a lot has happened in xdg-app since last time I blogged about it. Most noticeably, it isn't called xdg-app any more, having been renamed to Flatpak. It is now available in Debian experimental under that name, and the xdg-app package that was briefly…
June 03, 2016 by Robert Foss | Blog
Progress in they VC4 graphics camp and the Wayland camp now enables us to run Weston on top of the drm backend for VC4 platforms. Previously software acceleration using pixman was needed, but this is no longer the case. Let's explore running hardware…
May 25, 2016 by Olivier Crête | Blog
After missing the last few GStreamer hackfests I finally managed to attend this time. It was held in Thessaloniki, Greece’s second largest city. The city is located by the sea side and the entire hackfest and related activities were either directly by…
May 17, 2016 by Gustavo Padovan | Blog
Linux Kernel 4.6 was released this week, with a total of 9 Collabora engineers taking part in its development, Collabora’s highest number of engineers contributing to a single Linux Kernel release yet. In total Collabora contributed 42 patches.
April 21, 2016 by Tomeu Vizoso | Blog
New DRM drivers are being added to almost each new kernel release, and because the mode setting API is so rich and complex, bugs do slip in that translate to differences in behaviour between drivers.
November 10, 2021 by Sebastian Reichel | News & Events
It might be smaller than the last few kernels, but with well above 10,000 non-merge changes, the latest Linux kernel release still packs a punch. Released on October 31, kernel 5.15 brings lots of exciting new features.
November 02, 2021 by George Kiagiadakis | News & Events
Today marks a very exciting day as Fedora 35 has now been released, and with it comes WirePlumber as the default session manager for PipeWire! Under development by Collabora since 2019, WirePlumber has now entered the linux desktop space.
September 24, 2021 by Mark Filion | News & Events
Collaborans will be actively participating in next week's activities with seven talks on topics including Rust build scripts, embedded deep learning on GStreamer, HEVC decoding on mainline Linux, PipeWire and WirePlumber, and more.
September 21, 2021 by Alyssa Rosenzweig | News & Events
This important milestone is a step forward for the open source driver, as it now certifies Panfrost for use in commercial products containing Mali G52 and paves the way for further conformance submissions on other Mali GPUs.
September 16, 2021 by Stéphane Cerveau | News & Events
GStreamer can be tricky to ship in a constrained device. Thanks to a partnership with Huawei, you can now use gst-build to generate a minimal GStreamer build, tailored to a specific application, or set of applications. Here's how.
September 07, 2021 by Nícolas F. R. A. Prado | News & Events
With an ever-increasing interest in more modern hardware support, and a more reliable kernel that is thoroughly tested, contributions by Collabora's developers continue to help make this a reality for the Linux kernel.
September 01, 2021 by Mark Filion | News & Events
September's busy conference schedule kicks off next week with the Fall edition of Linaro Virtual Connect. Join us as we look at how to master your PipeWire streams with WirePlumber, and de-mystify GFX virtualization with VirGL!
July 20, 2021 by Alyssa Rosenzweig | News & Events
After a month of reverse-engineering the Arm Mali G78, we’re excited to release documentation on the Valhall instruction set, available as a PDF, as well as a Valhall assembler and disassembler to be used as a reverse-engineering aid.
July 08, 2021 by Gabriel Krisman Bertazi | News & Events
Collabora's team working directly on the Linux kernel is growing. Collaborans continue to expand on their efforts to close the gap between hardware support on vendor trees and mainline.
June 21, 2021 by Shreeya Patel | News & Events
Earlier this month, Collabora took part in the very first KernelCI hackfest, initiated as a joint effort with the Google Chrome OS team. Here's a look at what led to our participation and what was accomplished.
June 21, 2021 by Erica Ryoo | News & Events
Despite the many obstacles brought on by the pandemic, Collabora has continued to grow its teams for the road ahead. Join us in welcoming Kiril, Benjamin, Daniel, Shreeya, Ariel, Nicolas and James!
June 07, 2021 by Alexandros Frantzis | News & Events
We first announced our work on the driver last December, and posted an update earlier this year. We are now happy to announce a second update for this driver, adding several major features which increase its scope and utility.
Here are the events we'll be attending in the coming weeks – come say hello!
November 7-9, Prague, Czech Republic
November 15-18, Munich, Germany
November 19-20, Toulouse, France
November 29 - December 1, New Orleans, USA