News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

Weston 10.0.1 - a bug-fix release

July 05, 2022 by Marius Vlad  |   News & Events

The latest release of Weston was made on February 1, 2022. Meanwhile, a few bugs were discovered and we decided to do a bug-fix release, which we haven't had in several years.

Weston 10.0.1 - a bug-fix release

Adding even more heads for the group picture

June 21, 2022 by Kara Bembridge  |   News & Events

Part steadfast approach - part welcoming spirirt; Collabora continues to successfully expand with new talent amply on deck. Well ahead of the remote work curve, our new joiners have settled into their roles from their respective corners of the planet.

Adding even more heads for the group picture

Emerging ideas at Open Source Summit North America

June 16, 2022 by Kara Bembridge  |   News & Events

Big events draw in an array of individuals to learn and connect, and the Open Source Summit North America is no exception. Jam-packed with sessions to uncover from June 21 to 24, this year's event features three talks by Collabora's very own!

Emerging ideas at Open Source Summit North America

Adding secondary command buffers to PanVk

June 15, 2022 by Manas Chaudhary  |   Blog

Getting PanVk, an open source driver for Arm Mali Midgard and Bifrost GPUs, closer to conformancy by implementing one of the core Vulkan features: support for secondary command buffers.

Adding secondary command buffers to PanVk

Bridging the synchronization gap on Linux

June 09, 2022 by Faith Ekstrand  |   Blog

After fighting with the divide between implicit and explicit synchronization with Vulkan on Linux for over seven years, we may finally have some closure. We're not to synchronization nirvana quite yet, but this is an important step along the way.

Bridging the synchronization gap on Linux

Conformant open source support for Mali-G57

June 06, 2022 by Alyssa Rosenzweig  |   News & Events

Mali-G57 features in new MediaTek Chromebooks with the MT8192 and MT8195 system-on-chips. With Mesa 22.2 and an appropriate kernel, accelerated graphics will work out of the box on Linux on these laptops.

Conformant open source support for Mali-G57

Kernel 5.18: Milestones for the road ahead

June 02, 2022 by Dmitry Osipenko  |   News & Events

Released by Linus Torvalds on May 22 after a busy two-month development cycle, Linux kernel 5.18 brings new features and lights up new hardware. Let's take a look at the contributions made by our engineering team.

Kernel 5.18: Milestones for the road ahead

Monado's hand tracking: hand-waving our way towards a first attempt

May 31, 2022 by Moses Turner  |   Blog

Optical hand tracking for XR has a bit of a reputation - getting training data, training neural nets, and deploying them in real-time, low-latency environments such as XR is every bit as hard as they say it is.

Monado's hand tracking: hand-waving our way towards a first attempt

Finding the secret ingredient at Embedded and Kernel Recipes

May 26, 2022 by Kara Bembridge  |   News & Events

After a two-year hiatus, the City of Lights is shinning brightly again to welcome the community for a full week of engaging talks at Embedded Recipes and Kernel Recipes conferences.

Finding the secret ingredient at Embedded and Kernel Recipes

Talks of the town: Software engineering edition

May 17, 2022 by Kara Bembridge  |   News & Events

Less than a day away, May 18th looks to be a very busy time. With Live Embedded Event and Embedded Vision Summit taking place almost simultaneously, Collabora will be presenting four different talks!

Talks of the town: Software engineering edition

PipeWire: Bluetooth support status update

April 29, 2022 by Frederic Danis  |   News & Events

Over the last two years, Bluetooth® audio support has steadily grown in PipeWire and has become a featureful, stable, conformant, open source Bluetooth® audio stack implementation. Here's a look at where things stand.

PipeWire: Bluetooth support status update

SocketCAN x Kubernetes

April 27, 2022 by Jakub Piotr Cłapa  |   News & Events

Looking to use hardware-backed and virtual SocketCAN interfaces inside your Kubernetes Pods? A new device plugin now allows processes inside a pod to communicate with each other using the full Linux SocketCAN API.

SocketCAN x Kubernetes

XDC 2017 - Links to recorded presentations (videos)

September 23, 2017 by Guy Lunardi  |   Blog

Many thanks to Google for recording all the XDC2017 talks. To make them easier to watch, here are direct links to each talk recorded at XDC2017.

XDC 2017 - Links to recorded presentations (videos)

DebConf 17: Flatpak and Debian

August 17, 2017 by Simon McVittie  |   Blog

Last week, I attended DebConf 17 in Montréal, returning to DebConf for the first time in 10 years (last time was DebConf 7 in Edinburgh). It was great to put names to faces and meet more of my co-developers in person!

DebConf 17: Flatpak and Debian

Android: NXP i.MX6 on Etnaviv Update

July 24, 2017 by Robert Foss  |   Blog

More progress is being made in the area of i.MX6, etnaviv and Android. Since the last post a lot work has gone into upstreaming and stabilizing the etnaviv on Android ecosystem. This has involved Android, kernel and Mesa changes, many of which are available…

Android: NXP i.MX6 on Etnaviv Update

vkmark: more than a Vulkan benchmark

July 18, 2017 by Alexandros Frantzis  |   Blog

Ever since Vulkan was announced a few years ago, the idea of creating a Vulkan benchmarking tool in the spirit of glmark2 had been floating in my mind. Recently, thanks to my employer, Collabora, this idea has materialized! The result is the vkmark Vulkan…

vkmark: more than a Vulkan benchmark

Quick hack: Performance debugging Linux graphics on Mesa

June 29, 2017 by Robert Foss  |   Blog

Debugging graphics performance in a simple and high-level manner is possible for all Gallium based Mesa drivers using GALLIUM_HUD, a feature that adds performance graphs to applications.

Quick hack: Performance debugging Linux graphics on Mesa

Debian armhf VM on arm64 server

June 20, 2017 by Sjoerd Simons  |   Blog

At Collabora one of the many things we do is build Debian derivatives/overlays for customers on a variety of architectures including 32 bit and 64 bit ARM systems. And just as Debian does, our OBS system builds on native systems rather than emulators.

Debian armhf VM on arm64 server

NVMe: Officially faster for emulated controllers!

June 13, 2017 by Helen Koike  |   Blog

The feature to improve NVMe performance over emulated environments has now been officially released in the NVMe Specification Revision 1.3 under the name "Doorbell Buffer Config command", along with an implementation in the mainline Linux kernel!

NVMe: Officially faster for emulated controllers!

Android: NXP i.MX6 Buffer Modifier Support

June 05, 2017 by Robert Foss  |   Blog

GPUs like Intel and Vivante support storing contents of graphical buffers in different formats. Support for describing these formats using modifiers has now been added to Android and Mesa, enabling tiling artifact free running of Android on the iMX6 platform.

Android: NXP i.MX6 Buffer Modifier Support

Collabora contributions to GStreamer 1.12

May 04, 2017 by Olivier Crête  |   Blog

Along with the usual load of memory leaks, crashes and other bugs, Collabora's multimedia team once again contributed a number of improvements across a wide number of areas.

Collabora contributions to GStreamer 1.12

Android: Getting up and running on the iMX6

April 27, 2017 by Robert Foss  |   Blog

Getting Android up and running on the iMX6 platform using an open source graphics stack has been impossible up until recently, but now you can. Here's a guide through the steps.

Android: Getting up and running on the iMX6

Receiving an AES67 stream with GStreamer

April 25, 2017 by Olivier Crête  |   Blog

With GStreamer you can easily receive a AES67 stream, the standard which allows inter-operability between different IP based audio networking systems and transfers of live audio between profesionnal grade systems.

Receiving an AES67 stream with GStreamer

Quick hack: Changing the Android boot animation

April 21, 2017 by Robert Foss  |   Blog

If you're looking to change the Android boot animation to something other than the stock one, here's a hands-on guide to help you to do it.

Quick hack: Changing the Android boot animation

One weekend, two conferences

January 19, 2021 by Mark Filion  |   News & Events

Join us as our 2021 conference schedule gets underway this weekend with the virtual editions of linux.conf.au and MiniDebConf India! Collaborans will be giving talks on recent projects including futex2, and Open Source AI video analytics with Panfrost.

One weekend, two conferences

A Wayland driver for Wine

December 15, 2020 by Alexandros Frantzis  |   News & Events

After several months of work, we are excited to announce a first proposal for a Wayland driver for Wine. The proposal is in the form of an RFC, in order to explore how to best move forward with the upstreaming and further development of the driver.

A Wayland driver for Wine

Kernel 5.10: Rockchip, H.264, Bifrost & more!

December 14, 2020 by Ricardo Cañuelo Navarro  |   News & Events

Even amidst the chaos and uncertainty that 2020 brought, Linux Kernel development keeps moving forward at a constant and relentless pace. Collabora remains active, developing, maintaining, documenting and testing many parts of the kernel.

Kernel 5.10: Rockchip, H.264, Bifrost & more!

Linux App Summit 2020

November 12, 2020 by Mark Filion  |   News & Events

Starting today, and running until Saturday, join us at Linux App Summit for a look at Linux graphics, PipeWire, our work with Valve, and a virtual office hour with our Engineering Manager!

Linux App Summit 2020

Monado update: Passing conformance, Android support & more

November 02, 2020 by Jakob Bornecrantz  |   News & Events

Monado 0.4 OpenXR runtime introduces initial support for Android and passes all of the OpenXR conformance tests with both OpenGL and Vulkan on desktop with a simulated device.

Monado update: Passing conformance, Android support & more

Open Source Summit Europe & ELCE 2020

October 22, 2020 by Mark Filion  |   News & Events

The 4-day event is dedicated to everything open source and will showcase a program of 250+ talks. Collaborans will once again be actively participating in the week's activities, with no less than eight presentations, a BoF on KernelCI, and two panel discussions!

Open Source Summit Europe & ELCE 2020

Kernel 5.9: Onwards and upwards

October 22, 2020 by Mylène Josserand  |   News & Events

Collaborans continue to be very active in the Linux kernel, authoring over 150 commits in this release. Here's a look at the improvements, and new features, contributed by our team, notably in hardware support, multimedia, graphics and testing.

Kernel 5.9: Onwards and upwards

Collabora & GStreamer 1.18

October 06, 2020 by Stéphane Cerveau  |   News & Events

A move to GitLab. A switch to the powerful Meson build system. A fast and reliable CI system implemented. The GStreamer community has been busy, bringing a bevy of enhancements to 1.18. Here's a look at the key contributions by Collaborans.

Collabora & GStreamer 1.18

X.Org Developer's Conference 2020

September 15, 2020 by Mark Filion  |   News & Events

The lineup of great virtual conferences continues this week with the 2020 edition of X.Org Developer's Conference (XDC), the leading event for developers working on all things Open graphics, including the Linux kernel, Mesa, DRM, Wayland and X11.

X.Org Developer's Conference 2020

One week, two events: DebConf20 & Linux Plumbers Conference

August 24, 2020 by Mark Filion  |   News & Events

August ends on a high note with two virtual events this week: DebConf20, Debian's annual conference, and Linux Plumbers Conference, the premier event for developers working at all levels of the Linux kernel's plumbing layer and beyond.

One week, two events: DebConf20 & Linux Plumbers Conference

Kernel 5.8: Collabora's biggest & most significant contributions yet!

August 05, 2020 by Dafna Hirschfeld  |   News & Events

The ability for a relatively small software consultancy to contribute at this level demonstrates a fantastic improvement in vendors' mindset when it comes to working Open First and providing mainline support out-of-box as early as possible.

Kernel 5.8: Collabora's biggest & most significant contributions yet!

Lighthouse positional tracking in Monado with libsurvive

July 17, 2020 by Christoph Haag  |   News & Events

HTC Vive (Pro) and Valve Index hardware users can now experiment with positional tracking in Monado, thanks to the implementation of a libsurvive driver using the libsurvive library developed by Charles Lohr, David Berger and many contributors.

Lighthouse positional tracking in Monado with libsurvive

Search the newsroom

Upcoming Events

Here are the events we'll be attending in the coming weeks – come say hello!

AGL All Member Meeting

July 17-18, Berlin, Germany

 

Featured Video

Open Since 2005 logo

Our website only uses a strictly necessary session cookie provided by our CMS system. To find out more please follow this link.

Collabora Limited © 2005-2024. All rights reserved. Privacy Notice. Sitemap.